Used Treading Machine Pee-Wee - P10Cnc for sale (68,633)

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Psdpsz Ha Hlofx Ac Asgt Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2018, condition: used, machine/vehicle number: P18.0003, Rated power: 14.5 kW, speed range: 20-18,000 rpm, tool holder HKS-A63, 30-position tool changer, oscillating machining, controlled NC swivel milling head, machine weight: 2,200 kg, 1 steel drawer cabinet (gray), dimensions (W x H x D): approx. 80 x 120 x 80 cm, 8 drawers, filled with various accessories, 1 workbench, 1 with a sub-mounted steel drawer cabinet on the left, approx. 200 x 70 cm, 6 drawers, with contents. Podezqzadjpfx Ac Aogt

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Pjdpfxjh A S Hts Ac Ajgt Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base Pgjdpfeuz If Nsx Ac Aot - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min Pedpfx Aszd Hhaec Aogt stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK Podpfx Aez Eh Egjc Asgt XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Pgjdpfx Aexcal Aoc Ast

Condition: new, Thread rolling dies for various rolling machines, including UPW, UPWS, P10, P60, and ORT, with bores of 28 mm, 54 mm, 63 mm, 69 mm, 85 mm, 80 mm, 100 mm, and 110 mm. The dies can be ground to the desired thread profile. A list of available dies can be found in the image gallery. Price in EUR per set (2 pieces). Pgedpfxozfybce Ac Aot

Condition: excellent (used), Year of construction: 2013, XYZ 1630 SLX CNC Lathe Pgodpsz E R N Uofx Ac Ast New 2013. Swing 400mm x 760mm B.C. Spindle speeds & bore 150- 2500rpm & 54mm. C/w 3jaw chuck, quick change tool-post.

Condition: excellent (used), Year of construction: 2022, 400mm swing, Pgedpfx Acez Hatfj Aet 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Psdofn N U Hepfx Ac Asgt

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Pgsdpfx Ajxxb Rrsc Aet Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Pgjdpfexbfwzjx Ac Aet Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Podpsx D Tbmsfx Ac Ajgt Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Pgsdoz Eh Nlspfx Ac Ast Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: used, Donau DR52 Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Table size 1100 x 620 mm Drilling spindle stroke 225 mm Spindle speed range 28 - 1400 rpm Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m Pgjdpfxez D U Tze Ac Aot

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Pgsdpfez D Ugusx Ac Aot Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 Pjdjzpfy Sepfx Ac Asgt -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Plank SRB 35 High-Speed Radial Drilling Machine MK 4 German manufacturer In original, almost new condition, not repainted. I have owned several high-speed radial drilling machines, but I was very surprised by this one. Stepless speed adjustment with 2 gear stages, stepless feed, threading device, Coolant system, excellent clamping, complete documentation, Runs as smoothly as a new machine. Speeds: 0 - 2880 Table: 1050 x 400 Overhang max. 1040 min. 370 Distance table to spindle max. 650 min. 280 Drilling stroke 140 Weight: 1900 kg Can, of course, be inspected while powered on. Free loading at D - 88433 Schemmerhofen. Pgodpfx Acez A Ud De Ajt

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine Pgsdjztdz Aepfx Ac Ast - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules. Pgedpfswqb Scex Ac Aet

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization). Pgedpfx Asyhn A Isc Aet

Condition: used, operating hours: 3,163 h, fuel type: diesel, fuel: diesel, HAKO Automatic Cleaner and Vacuum Cleaner Name: HAKO JONAS 1450 D Power: Diesel Condition: OK, see photos Used features (please call for any defects) Battery is fully charged Large collection basket with discharge container / hydraulic Brush replaced Item No.: 1450 D Manufacturer: HAKO Year of manufacture: see photo - looks good Operating hour meter reads "3163" 2 brushes Fuel: Diesel Price quoted upon pickup from warehouse 47441 Moers Various cleaning and scrubbing machines in stock We offer as shown. Psdpfx Acewffaaj Asgt Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €650 net, depending on distance.) All dimensions are approximate.

Condition: good (used), Includes tool cabinet and drill bits! 2. Table Pgodpfxez Db Eqj Ac Aet Work area: 600mm x 1200mm Tool holder: MK 4 Drilling capacity: 40mm in steel Tapping attachment Coolant system

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) Pjdpfxsz Dx Sho Ac Asgt General overhaul of the spindle