Used Thermasmart Batch Of Thermal Pipe Insulation for sale (10,814)

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: Pro Coil E-18/9, Thermaflex ThermaSmart PRO Coil E-18/9, thermal pipe insulation in box. Lot of 65 boxes. Diameter: 18mm Thickness: 9mm Hedpfxjw Hzu Ae Ac Tet Length: 23m

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. Hsdpfxozvckns Ac Tet The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Hsdpfx Ajh Rawuec Tet Density kg / m3: 96 Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Hedpfozutgkex Ac Tot Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Serial number: 1219 Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Autoclaves Technical Specifications * Quantity: 2 Autoclaves with automatic loading system * Length: 12 000 mm * Diameter: 3 200 mm * Volume: 102 231 L Hjdjyt Nqqopfx Ac Tst * Maximum Operating Pressure: 4.0 bar * Maximum Operating Temperature: 120 °C * Test Pressure: 7.4 bar Boiler Technical Specifications * Boiler Brand: Norbidel * Year: 2018 * Model: NB B1200 * Fuel: Natural Gas * Fluid: Water + Steam * Steam Production: 1,200 kg/h * Maximum Allowable Pressure: 10 bar(g) * Test Pressure: 16.2 bar(g) * Maximum Temperature: 183.2 °C * Minimum Temperature: 20 °C * Heating Surface: 30 m² * Volume: 3,365 liters * Thermal Power: 1,030 kW * Total Empty Weight: 6,200 kg

Condition: good (used), Used, insulated stainless steel storage tank Item number: 10216 Last known use: Unknown Volume: 1500L Type: Standing on legs Material (in contact with media): 1.4301 / AISI304 Design: Insulated Bottom: Conical bottom Top: Conical top Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 1390mm Distance from outlet to bottom: 290mm Overall height: 2400mm Height of legs: 770mm Cylindrical height: 1400mm Overall width: 1400mm Hododxwqdspfx Ac Tet Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Cylinder and bottom insulated Vent pipe Manhole cover on the top 5x nozzles on the top, DIN11851

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Hedpfx Acsxpfuio Tot Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), A good used Thermal Transfer overprinter from Open Date Equipment Ltd - model 107L - intermittent motion TTO with a large print area of 107 x 160mm - complete with frame power supply - keyapd - software and cables. Manuals available Ready to ship worldwide Hjdpeyg Nlujfx Ac Tet Export documentation available Request additional images and videos via Whats App

Condition: like new (used), PIPE BENDING MACHINE FOR UP TO DIAMETER 36 MM ARE INCLUDED MANY MOLDS FOR BENDING PURPOSES READY FOR ANY INSPECTION, UNDER POWER. "Your Next Reliable Production Machine Starts Here" Hjdpozupn Rsfx Ac Tet

Year of construction: 2022, condition: like new (used), Zebra ZE511 Thermal Transfer Print Engine Model: ZE51143-L0E0000Z Hedpozpy Abjfx Ac Tjt Year: 2022 Brand new, unused, ex stores stock (open box)

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Technical Specifications • Screen Drum Diameter: 1,200 mm • Working Length: 2,300 mm • Drive Power: 55–132 kW • Dimensions: o Length: 3,600 mm Hjdpfowm Nfvox Ac Tst o Width: 2,600 mm o Height: 2,300 mm o Height with Open Cover: 4,100 mm • Screen Perforation (Standard): 2.5 mm • Throughput Capacity: o Rigid Plastics: Up to 4.0 t/h o Films: Up to 1.8 t/h

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Hodpfx Asv Si Szjc Tst Terms of delivery: ex location

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Hodozlud Eepfx Ac Tet Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec.

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Hedjwm Nd Eepfx Ac Tot

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Feature Details Rotor Diameter 500 mm Rotor Length 3000 mm Rotor Speed 1000 rpm Drive Power 18.5 kW Screen Hole Size Standard: 2.5 mm; Max: 3 mm Housing Material Stainless Steel Rotor Material Mild Steel Bearing Type Flange Bearing Throughput (HDPE) Up to 3.5 tonnes per hour Throughput (PET) Up to 3.5 tonnes per hour Throughput (LDPE) Up to 2 tonnes per hour • Inclined cylindrical trough design for efficient washing and transport • High-speed paddle rotor generates friction to clean contaminants • Replaceable screen with automatic rinsing/self-cleaning system Hodpfx Aewm I S Iec Tot • Water injection system for enhanced cleaning performance • Easy maintenance with accessible rotor and screen

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Height (mm): 1570mm Hsdpfxezupvuj Ac Tjt Description: Includes Thermal Dynamics A40i plasma source & various wear parts.

Condition: good (used), A used Batch Roaster for Almonds 2015 from J Borrell - gas fired - control unit including flues Hedpfjx Nf Nvex Ac Tet Ready to ship worldwide Export Documentation and Shipping options available Please request pictures and videos via Whats App

Year of construction: 2018, condition: excellent (used), Kiremko batch fryer (KCLIG020) x 2 available (YOM 2018/2012) Hsdpfxsznv Tys Ac Tot 2 x Kiremko batch fryers, previously used for potato crisps 20kg per hour each line. (40kg per hour total) Both Kiremko fryer lines come with a slicer. One slicer Fam and the other Urschel. In excellent condition, fully working. Both lines come with extractors and fire suppression kit.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, We are offering for sale a complete, fully functional ZREMB concrete plant, designed for the production of ready-mix concrete, precast elements, and paving stones. The plant is equipped with high-quality components from reputable manufacturers, automatic control, and a modern recycling and heating system, enabling year-round production. Key equipment: ZREMB Concrete Plant • Complete steel structure with enclosure, • Automatic control system SAUTER GmbH SUS 4.0, • Control container, • Full automation of the production process. ORU Mixers • Planetary mixer 750 l, • Planetary mixer EPM 3000 ES (3000 l), • EPM 3000 equipped with two independent discharge outlets, increasing production capacity. Dosing System • Lifting and filling device, • Tipping skips, • Buffer tank above the mixers, • Aggregate distributor for two mixers, • Cement scales for both mixers, • Water scale with flow meter, • Chemical additive dispenser, Hjdpfx Acezw Aq Re Tot • Liquid pigment dispenser, • Microwave moisture probes in the mixers and aggregate tanks. Material Storage • Aggregate storage silo 6 × 25 m³ with a roof, • Aggregate belt scales, • 3 cement silos with complete equipment, • 1 two-chamber silo, • 5 screw conveyors. FEGO INDUSTRY Recycling System Complete installation for concrete and washout water recovery: • Capacity 12 m³/h, • Aggregate washing 2–32 mm, • Aggregate separator, • Washout water tank 40 m³, • Intermediate tank 1.5 m³, • Recycling tank, • 3 slurry pumps. FEGO INDUSTRY Heating System Water heating • Boiler 255 kW, • Capacity: • 13,500 l/h (10°C → 45°C), • 6,750 l/h (10°C → 70°C), • Fuel: light fuel oil, • Fuel consumption: 21.5 kg/h. Aggregate heating Hot air system: • Thermal power 250 kW, • Air temperature 110–120°C, • Capacity 6500 m³/h, • Fan 18.5 kW. Thanks to the installation, production is possible even during the winter season. The sale also includes: • Complete supporting structure, • Working platforms, • Enclosure made of sandwich panels, • Technological installations, • Electrical installations, • Complete control system, • Technical documentation (if available). Advantages - Automatic concrete production - Two independent ORU mixers - Two discharge outlets from the EPM 3000 mixer - Complete washout water recycling - Water and aggregate heating - Possibility of operation throughout the year - Complete installation ready for dismantling and reassembly Interested parties are invited to contact us by phone at 605 583 061 to obtain detailed information and arrange a presentation of the equipment.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-232.0495, total length: 12,000 mm, input voltage: 400 V, feed length X-axis: 2,300 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, Automatic butyl extruder in excellent condition, technically refurbished by Glaston in 2025. Hodpfx Aezw Erwoc Tet Upgrades to the operating panel and replaced parts are listed; please contact us for more information. Maximum size: 2300x2500mm Minimum size: 250x250mm, but not suitable for Georgian bars.

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, Refurbished at Industrial Microwave Services Ltd to comply with UK Safety Standards. • Manufacturer/Brand: Tianjin Leici Electronic Technology Co., Ltd. (A prominent Chinese specialized manufacturer of industrial microwave drying systems and component integration). • Core Subsystem Model: MG1000 (Specifically utilizing the MG1000 Microwave Inverter Power Supply units coupled with dedicated industrial air-cooled magnetrons which have been upgraded). • Equipment Classification: 18kW Industrial Tumbling Cage Microwave Drying/Sterilization Oven. The 18kW total operating rating is achieved structurally by stacking 18 modular 1kW MG1000 power-and-magnetron sets together inside the machine grid. Machine External Dimensions: Hedpfx Ajyv H T Asc Tot 1550mm Wide - 1178mm Depth - 1800mm High Internal Cavity Depth: 900 mm Door Width: 680mm 6 x Internal S/S trays - 805mm long - 295mm Wide - 9mm Depth 18Kw at 100amps 3 phase + neutral needed Weight approx. 500kg. Refurb Notes 1. Control system being fitted with a siemans PLC, controlled from a 4” siemans H.M.I. 2. Applicator structural strengthening and seam welding of all joints. 3. Emergency stop safety systems to conform to U.K. safety standards. 4. Strengthen the main frame to enable the equipment to moved without damage. 5. Improve the Magnetron launch inputs to the cavity. 6. Fit serviceable covers on all Magnetron ports inside applicator cavity.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry Hjdpfx Ajuc Sifsc Tjt The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. Hsdpjwwzudefx Ac Tst One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: used, A good used Thermal Transfer Overprinter from Domino - Model V320i with Touch Screen Controls & Printer mounting Frame Hedpfx Acjwmfp Do Tst

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B robot, fully equipped with options. Hodpfjzxblpox Ac Tst DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc.