Used Single Column Drawing Press - Mechanical for sale (26,336)

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm Lodpju Nfinefx Amnorl *

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Ledpfxeyupulj Amnerl Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t Ljdsym D E Ajpfx Amnjrl dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: good (used), Year of construction: 1982, machine/vehicle number: 055-013-15, Offer 25274 Technical Data: - Max. pressing force: 25 t - Max. ram stroke: 500 mm - Stroke speed: 200 mm/sec - Return speed: 450 mm/sec - Installation height: 800 mm - Throat depth to centre of ram: 380 mm Lodpoy Ewx Uefx Amnjrl - Ram clamping area: 440 x 360 mm - Ram clamping pin: 40 mm - Table size: 630 x 500 mm - Table opening / through hole: 180 mm - Drawing cushion: 10 t - Electric foot switch - Two-hand control panel - Drive: 400 V / 12.5 kW - Required space approx.: W 800 x H 2750 x D 1150 mm - Weight approx.: 2400 kg

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm Lsdofim Thspfx Amnsrl weight approx. 10 ton. good condition

Condition: used, Year of construction: 2024, pressure 70 t throat 325 mm stroke 800 mm die cushion capacity 35 t Lrodpsvn U Sxjfx Amnel drawing stroke 280 mm ejector stroke 240 mm rapid traverse - down 650 mm/sec working feed 58-199 mm/sec dayligth 1050 mm table surface area 900x580 mm ram surface 460x460 mm total power requirement 45 kW weight of the machine ca. 6,3 t dimensions of the machine ca. BxTxH 1000x2200x4000 mm

Condition: used, pressure 160 t throat 360 mm stroke 500 mm Ledpfxslp U Hge Amnsrl table surface area 1250x630 mm ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm Ljdpfx Amot Hw E Ionsrl

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Pressure capacity: 100 tonnes Lrodpfx Ajy Tpr Ajmnol Table: 4000 x 500 mm Weight: 5700 kg

Condition: used, Year of construction: 1976, pressure 20 t Lredpfotqqwuox Amnol throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm Ledpfx Asvb I Itjmnerl stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm Lsdpjtqqxbefx Amnerl stroke 4 - 80 mm table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm total power requirement 1,1 kW weight of the machine ca. 1,45 t dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm Lodpfsugnpisx Amnjrl no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. Lrsdpjdzp Trjfx Amnsl During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Ljdpfoi Db Ibsx Amnorl Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Lsdpfx Asv Uraaomnjrl Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: new, Year of construction: 2026, pressing force: 15 t, C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 tons. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for insertion work, assembly processes, and small-batch production in industrial applications. ##### Technical Data + Information: ==== General Information - Design: C-frame / Single-column press - Manufacturer: DURENDUS - Pressing force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Installation height max.: 350 mm - Working height: 800 mm - Overall height: approx. 2,000 mm - Overall width with control cabinet: approx. 900 mm - Overall depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guidance: 2-way ==== Hydraulic Cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Starting speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & Drive - Hydraulic unit: DUPLOMATIC - Hydraulic pump: ASC - Flow rate: 7.5 l/min - Tank volume: 50 l - Cooling: Air cooler - Oil level monitoring: electronic - Hydraulic unit: mounted on top of the machine ==== Control - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" Ljdpfx Amsy Twg Ijnerl - Pressure setting via touchscreen - Stroke setting via touchscreen - Temperature monitoring of hydraulic oil - Error display on display - Remote service / remote maintenance possible - Operation: Two-hand operation ==== Safety - Light curtain - Two-hand operation - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 2.2 kW - Lighting: LED - Protection class control cabinet: IP 54 ##### Application areas: Insertion, assembly work, small-batch production, jig and fixture construction, toolmaking, metalworking, fine assembly, testing, workshop applications (Hydraulic press, C-press, C-frame press, Single-column press, 15 T press, 15-ton press, assembly press, insertion press, small-batch press, workshop press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly attractive prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm Lsdpsy Nd Svjfx Amnjrl hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1976, pressure 025 t table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm Ledpfxjy Nd Spj Amnsrl ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm Lodpfx Amovuuh Tonjrl pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Lrodpfxovuuhgo Amnjl Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Lrjdpfxjvuucqe Amnjl Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm Lrodpey Tvdxjfx Amnol - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: used, Year of construction: 1977, pressure 25 t throat 250 mm stroke 400 mm table surface area 600x480 mm ram surface Ø135 mm table height 980 mm Lredpfsy Sliusx Amnel weight of the machine ca. 1,5 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm Ljdpoy Rutaofx Amnsrl ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m AS SPARE PARTS DISPENSER