Used Sidel Sbo4/6 Blow Moulder (1992) for sale (51,103)

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Knsdpfx Aonpbhvskwsc

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Knjdpfx Aksg Ailcswoc Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. It is already packed in seaworthy export crates. Techn. Details Knodpfx Akjrkgy Uswjc - Capacity: 7.200 bph in 1,5L - Number of moulds:  6 (molds not included) - Equipped with quick change for shell molds - Number of heating modules: 10 modules - Neck personalization: 29/25      - Working hours: 47.000 only         - Machine was regularily maintained       - Retrofitted by the previous owner in 2020 - Machine equipped with:            - Sidel preforms elevator to unscrambler - Sidel preforms unscrambler & feeder - Sidel oven & blowing wheel for 6 molds - Sidel electrical cabinet - Sidel PCC drive & control panel - Big set of spare parts list upon request

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data - Capacity: - 7,600 bph on 1.0 L - Formats: - Neck finish 29/21 - Preforms processed: RPET Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Sidel caterpillar oven - 6 heating modules - Sidel preforms tipper - Sidel preforms hopper & feeder - Sidel preforms infeed rail - Sidel caterpillar oven & blowing wheel - Solenoid valves Sidel Universal type - Sidel PCC version V2.02 - Sidel CE electrical cabinet (Siemens) Knsdpeyb Tbpjfx Akwsc - Service history: - Sidel maintenance completed September 2024 - Elongation sensor retrofitted - Additional service by client’s technicians Scope of Delivery  - Stretch blow-moulder SIDEL SBO 6 Series 2 - Preforms tipper - Preforms hopper & feeder - Preforms infeed rail - Caterpillar oven & blowing wheel

Condition: used, Year of construction: 2006, Overview This SIDEL SBO 2 XL Compact is a two-cavity PET stretch blow moulding machine built in 2006 for large-format containers of up to 10 litres. It pairs a Sidel preform tipper, hopper and feeder with a Sidel Compact linear oven with 5 heating modules and a blowing station for two moulds. Output depends on bottle size: approx. 2,400 bottles/hour at 500 ml, approx. 2,000 bottles/hour at 5 litres and approx. 1,000 bottles/hour at 10 litres. The machine is currently set up for preforms with a 48/41 neck finish and last produced 8-litre PET bottles. Its hour counter reads approx. 12,500 hours. It ran in a plastics converting plant until March 2026 and was then dismantled by skilled technicians and stored dry. Large-format blow moulders of this size are rarely offered on the second-hand market. Moulds are not included. Technical data - Manufacturer: SIDEL - Model: SBO 2 XL Compact - Year of manufacture: 2006 - Machine type: PET stretch blow moulding machine - Bottle size range: approx. 2.0 to 10.0 litres - Current bottle format: 8 litre PET - Current neck finish: 48/41 - Mould stations: 2, block moulds - Moulds: not included - Oven: Sidel Compact linear oven - Heating modules: 5 - Output at 500 ml: approx. 2,400 bottles/hour - Output at 5 litres: approx. 2,000 bottles/hour - Output at 10 litres: approx. 1,000 bottles/hour - Operating hours: approx. 12,500 h - Control: Siemens SIMATIC touchscreen HMI Equipment - Sidel preform tipper - Sidel preform hopper and feeder - Sidel Compact linear oven with 5 heating modules - Sidel blowing station for 2 moulds - Sidel electrical cabinet - Sidel drive panels with Siemens touchscreen control - Safety enclosure with transparent guard panels - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition Ksdpfx Aozxtziokwsnc Used - good working condition. The machine was serviced by Sidel and by in-house technicians under a regular preventive maintenance schedule, and ran in production until March 2026. It is now dismantled and stored dry and can be inspected in stored condition. Availability Immediately. Location: France. Ready for loading and shipment.

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL - Model: SBO 10/14 Series 1 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW - Electrical supply: 400 V / 470 A Kodezrhr Aopfx Akwonc Condition Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Availability Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2010, machine/vehicle number: SO146, Used SIDEL PET Blow molding machine - Year 2010Technical Specifications & Performance DataThis Sidel PET blow molding machine, model SBO10, is designed for the rotary stretch-blow molding of PET bottles from preforms. Manufactured in 2010, the machine is configured with 10 cavities and has a stated production capacity of 14,000 bph. The Ø28 1881 neck finish is specified for the installed mold and preform configuration.Manufacturer: SidelModel: SBO10Year: 2010Production capacity: 14,000 bphNumber of cavities: 10Preform neck finish: Ø28 1881Blower footprint: 8,900 mm length x 3,200 mm widthInstalled power: 306 kWMain electrical supply: 3 x 400 V, 50/60 HzMaximum current: 452 AAdvanced Automation & Control SystemsThe machine operates from a 3 x 400 V electrical supply and is specified for 50/60 Hz operation. A 24 V remote-control circuit is indicated. Its electrical installation includes a short-circuit rating of 25 kA RMS symmetrical, supporting integration into an appropriately designed industrial electrical system.The rotary PET blow molding process is suited to automated preform handling, bottle formation and discharge to downstream bottling equipment. The supplied preform handling equipment includes an elevator column, mini-hopper assembly and main hopper/feeder.Production Line Integration CapabilitiesThis PET bottle blower can serve as the bottle-forming stage of a used bottling line for beverage production and industrial packaging. It can be integrated with preform supply equipment upstream and with air conveyors, filling monoblocks, labeling machines, shrink wrappers and palletizing systems downstream.The supplied equipment list includes a Sidel EBH 2050 PET preform press manufactured in 2010 and a Sidel-Alsim air conveyor manufactured in 1999. The air conveyor supports transfer of newly formed PET bottles toward subsequent packaging machinery.Preform elevator column: 5,200 mm length x 1,300 mm width x 1,200 mm height; 250 kgMini-hopper assembly: 2,900 mm length x 1,630 mm width x 1,160 mm height; 367 kgMain hopper/feeder: 2,590 mm length x 1,850 mm widthMachine Condition & Maintenance HistoryThe machine is presented as a second hand Sidel PET blow molding machine with identified year, model, output and electrical data. Buyers can use the stated configuration and associated handling equipment details when planning inspection, recommissioning and integration into a PET bottling or industrial packaging production line.Operational Performance & VersatilityThe SBO10 is designed to convert PET preforms into finished PET bottles through a rotary stretch-blow molding process. Its 10-cavity arrangement supports continuous bottle production at the stated output. The specified Ø28 1881 neck finish identifies the available preform and bottle-neck configuration.As part of beverage production equipment, a PET blow molding machine typically supplies e... Kjdpfx Akoz E Dfijwjnc

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Kedowa Rhropfx Akwsnc Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Kodpfoutni Rsx Akwenc Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 2008, Overview  Knsdpfx Akoyb Tbiowoc This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  - Capacity: - 10,200 bph - Working hours: - ~50,000 h - Formats: - Neck finish: 29/21 (can be modified to 1881 or others) - Preforms used: R-PET by Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Kosme linear oven - 8 heating modules - Kosme preform tipper with conveying system - Kosme preforms feeding rail - Kosme electrical cabinet - Kosme Danfoss VLT drive - Kosme touch screen control panel - Set of spare parts (list on request) - Service history: - Kosme FBA maintenance - Complete Kosme service in October 2024 - Ongoing service by in-house technicians Scope of Delivery  - Stretch blow-moulder KOSME KSB 6R - Preform tipper with conveying system - Preform feeding rail - Electrical cabinet - Drive and control panel - Spare parts list (on request)

Condition: new, Parts for the SIDEL blow molding machine bearings O ring Knedpfx Akoiqum Iowsc nozzle strap sealing axis

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. Knedeyybkdjpfx Akwsc The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data - Capacity: approx. 12,000 bottles/hour - Formats: up to 3 L PET bottles - Application: PET bottle production - Configuration: Rotary stretch blow moulding machine, 6 cavities - Neck finish: PCO 1881 Scope of Delivery - Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds - Preform feeding system  - Chiller unit  - Air conveyor system  - Control system | Integrated HMI

Condition: used, Year of construction: 2004, Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data  - Capacity: - Max. 13,600 bph - Formats: - 0.50 L - 1.00 L - 1.50 L - Neck finish: - PCO 1881 - Alaska - Number of cavities: - 8 moulds - Operating hours: - Approx. 35,000 h Scope of Delivery  Knodpfxsylacus Akwec - KRONES CONTIFORM S8 stretch blow moulding machine - Preform hopper and feeder - Chiller - 6 sets of moulds - Spare parts

Condition: used, Year of construction: 2014, Overview This stretch blow molding machine was manufactured in 2014 by Urola. The machine is designed for the production of PET containers with a 2-cavity mold configuration. Technical data  - Capacity: Maximum 3,200 bph - Formats: Maximum container dimensions 120 mm diameter × 350 mm height - Application: Production of PET containers - Configuration: 2 cavities Installed Power - Preform rotation motor: 0.18 kW - Clamping press motor: 7.5 kW - Stretching motor: 3.0 kW - Transfer arm motor: 1.3 kW - Preform heating oven: 32.0 kW - Preform feeder: 0.36 kW Knedpfx Akeyr Iy Uewec - 24 VDC power supply (10 A): 1.0 kW - Air reflector fan: 0.75 kW - Neck cooling fan: 0.75 kW - Lubrication pump: 0.07 kW - Container evacuation: 0.09 kW - Intermittent chain rotation: 0.18 kW Cooling Circuit - Water inlet temperature: 10–20 °C - Water consumption: 2 m³/h - Operating pressure: 4 kg/cm² - Cooling capacity: 10,000 kcal/h Pneumatic System – Low Pressure - Operating pressure: 7 kg/cm² - Air consumption: 800 l/min Pneumatic System – High Pressure - Operating pressure: 38 kg/cm² - Air consumption: 5,000 l/min

Condition: used, Year of construction: 2008, Overview This blowing machine was manufactured in 2009 by Italian manufacturer SIPA. The machine was part of a complete non‑returnable PET bottle filling line dedicated to juices production. It was used to produce small formats as 0.2 - 0.25 and 0.5 L PET bottles and operated at a nominal speed of 12,500 bottles per hour. The machine is described as being in perfect condition since it had been dedicated for a small private label production. The equipment becomes available as the seller has finished the production dedicated to fruit juices. Technical data Knsdpfx Aezb Adtokwec - Capacity: 12.5000 bottles/hour - Year of manufacture: 2009 - Formats: 0.2 - 0.25 and 0.5 L - Application: Juices - Container material: PET - Neck finish: 38 mm - Air conveying system available Scope of supply - blow moulder Sipa SFR EVO 8 (2009) - preform feeding - preform container - preform tilting device - spare parts available - air conveying system available

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Kodpfxex A Uu Es Akwjnc Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: used, Year of construction: 2003, Overview SIG Corpoplast BLOMAX 18 Series III rotary stretch blow moulder for PET bottles, built in 2003. Rated output is up to 27,000 bottles per hour on 0.5, 1.0 and 1.5 L bottles and up to 24,300 bottles per hour on 2.0 L. The machine last produced 1.0 L bottles for mineral water and carbonated soft drinks at 27,000 bottles per hour with a PCO 1881 neck finish. It ran in production until August 2026 and is still installed and under power. The preform feeding (box tipper, inclined elevator and unscrambler) and the chiller are part of the sale. Technical data - Manufacturer: SIG Corpoplast - Model: BLOMAX 18 Series III - Year of construction: 2003 - Machine type: rotary stretch blow moulder for PET bottles - Rated output: max. 27,000 bottles per hour on 0.5 / 1.0 / 1.5 L, max. 24,300 bottles per hour on 2.0 L - Last format: 1.0 L bottle, 32 g, 28 mm PCO 1881 neck finish, petaloid base - Blow air pressure: 40 bar - Blow air consumption, nominal: 1,072 m³/h on 0.5 L and 1,724 m³/h on 1.0 L at 27,000 bottles per hour - Connected load: 255 kVA machine, 62 kVA chiller - Working voltage: 400 V, 3 phases + N, 50/60 Hz Knedez Ng Aaepfx Akwjc - Rated current: 480 A, max. fuse 500 A - Control voltage: 24 V DC - Dimensions (L x W x H): 11.5 x 11.2 x 4.2 m including preform feeding - Weight: 30,550 kg - CE marked Scope of delivery - BLOMAX 18 blow moulder with preform heating oven and blow wheel - Two operator panels with touchscreen HMI - Electrical cabinets and media connections - Preform box tipper for octabins and mesh boxes - Inclined preform elevator - M. Tanner preform unscrambler with access platform - Chiller - Spare parts from stock, list available on request Blow moulds are not included in the sale. Condition Used in water bottling until August 2026. The machine is still installed and under power and can be inspected. Availability Dismantling is possible from week 49 of 2026; the machine is available from 30 November 2026.

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Video: Machines and Equipment 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 Ksdpfjz Ri N Ejx Akwenc 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: used, Year of construction: 2000, Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Knsdpfxol Hxpno Akwec - Capacity: 3.600 bph  - 3 cavities - Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  - Space requirement approx. 9x5 m²  - Weight: 4,5 t  - Operating hours: 23.824   - Bottles - Volume: 250 ml - 2500 ml   - Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  - Capacity: 4.000 bph  - 4 cavities - Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  - space requirement approx. 22 m² (incl. preform feeding system) - Bottles - 1,0 l PET - 0,5 l PET - 0,33 l PET Kjdpfowizc Eox Akwsnc Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  - Capacity: 3.600 bph  - 3 cavities - Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  - space requirement approx. 9x5 m²  Knsdpfxsl Hxprs Akwjc - weight: 4,5 t  - Operating hours: 19.935   - Bottles - Volume: 250 ml - 2500 ml   - Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES - 1. Horizontal bottom 11 kw - 2. Vertical right 7.5 kw - 3. Vertical left 7.5 kw - 4. Horizontal top 11 kw - 5. Horizontal top 7.5 kw - 6. Horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012 Knjdpfxjywfkvj Akwoc

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, working width: 230 mm, working height: 120 mm, Equipment: CE marking, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES 1. horizontal bottom 11 kw 2. vertical right 7.5 kw 3. vertical left 7.5 kw Knjdpfszcn A Rsx Akwjc 4. horizontal top 11 kw 5. horizontal top 7.5 kw 6. horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012

Condition: used, Year of construction: 2013, machine/vehicle number: DEPAL44, Used SIDEL seep-off depalletizer - Year 2013Technical Specifications & Performance DataThis Sidel Sweep-Off automatic depalletizer is designed to unload bottles and jars from palletized layers and transfer them efficiently to the downstream production line. Built in 2013, it is suitable for industrial packaging operations requiring reliable container handling at the start of a used bottling line.Manufacturer: SidelModel: Sweep-OffProduction capacity: up to 200 layers/hourProcessable pallet format: 1000 x 1200 mmContainer materials: Glass and AluminumHandled containers: Bottles and jarsInstalled power: 17.7 kWElectrical supply: 400 V, 3-phase + protective earth, 50 HzFull-load current: 32 AOperating pressure: 6 barAdvanced Automation & Control SystemsThe machine operates automatically through a Siemens S7-300 PLC and a B&R Panel PC 800 operator interface. This control architecture provides operators with an intuitive interface for managing depalletizing cycles, pallet handling and line transfer operations. Automated control supports consistent layer discharge and coordinated operation with connected bottling equipment.Production Line Integration CapabilitiesThe Sweep-Off depalletizer is positioned at the infeed of a bottling or industrial packaging line, where it transfers containers from 1000 x 1200 mm pallets to conveyor systems feeding downstream process equipment. It can be integrated with rinsing, filling, capping, labeling and secondary packaging machinery. Its handling capability for glass bottles, aluminum cans and jars makes it suitable for flexible beverage production and packaged food applications.For a second hand production line, the depalletizer provides an important automated material-handling function by reducing manual pallet unloading and maintaining a controlled flow of empty containers toward the line.Machine Condition & Maintenance HistoryThe machine is ready for operation and has been overhauled. Compatible spare parts are available, and the machine is supplied with a 6-month warranty. Its stated ready-to-use condition makes it suitable for buyers seeking a used bottling line component that can be integrated into an existing industrial packaging installation.Operational Performance & VersatilityThis automatic depalletizer is intended for bottles and jars used in preserves, still water, sparkling water, soft drinks, milk, oil, beer, wine and spirits production. The Sweep-Off handling concept supports orderly transfer from pallet layers to the production line, helping maintain a continuous container supply to downstream bottling equipment. Its compatibility with glass and aluminum containers broadens its use across beverage production and food packaging environments.Installation Requirements & Site PreparationInstallation planning should allow for pallet loading and unloading access, the 1000 x 1200 mm pallet footprint, and connection to infeed and discharge conveyors. The electrical installation requires a 400 V, 3-phase + protective e... Kodpfjz E Dgmjx Akwenc

Condition: used, Year of construction: 2013, machine/vehicle number: PAL62, Used SIDEL monocolumn Palletizer 200 Unit per hour -Year 2013Technical Specifications & Performance DataThe Sidel Monocolumn palletizer is an automatic palletizing solution designed for the efficient end-of-line handling of PET bottles in industrial packaging and beverage production environments. Built in 2013, this machine is configured to process a current bottle format of 2.0L and can reach a maximum performance of 200 layers per hour.Manufacturer: SidelModel: MonocolumnManufacturing year: 2013Container material: PETCurrent format: 2.0L bottlesMaximum capacity: 200 layers per hourSupported pallet: Eur-EPAL 800x1200 mmInstalled power: 73 kWWorking plane height: 800 mmAdvanced Automation & Control SystemsThe palletizer is controlled by a Siemens PLC, providing dependable automated coordination of palletizing movements and end-of-line material handling. The electrical system is configured for three-phase operation, with a rated voltage of 390 V and a frequency of 50 Hz. Full-load current is rated at 60 A.An automatic layer-sheet inserter is included. This system places interlayer sheets between product layers to improve load separation, support pallet stability, and protect packaged PET bottles during handling and transport.Production Line Integration CapabilitiesThis automatic palletizer is suitable for integration at the end of a used bottling line, after secondary packaging equipment such as shrink wrappers, case packers, or bundle handling conveyors. It is designed to stack packaged PET bottles onto Eur-EPAL pallets measuring 800x1200 mm.Its application is appropriate for beverage production lines handling natural water, carbonated water, soft drinks, milk, beer, wine, spirits, oil, and preserved products. The Monocolumn configuration supports organized pallet formation for industrial packaging operations where reliable transfer from packaging machinery to warehousing or dispatch is required.Machine Condition & Maintenance HistoryThe machine is reconditioned and ready for operation. It is supplied with a 6-month warranty and compatible spare parts are available. This second hand palletizer is intended for buyers seeking a prepared end-of-line solution for integration into an operating production line.Before installation, the purchaser can verify the selected pallet pattern, product pack configuration, conveyor interfaces, and layer-sheet specification to ensure compatibility with the intended packaging process.Operational Performance & VersatilityThe Sidel Monocolumn palletizer handles PET bottle packs and provides automatic layer formation and pallet stacking. The integrated layer-sheet application system is particularly useful where stable, separated pallet layers are required for storage and transport.With a maximum output of 200 layers per hour, the machine supports efficient downstream handling in beverage production and other packaged-product applications. Its automated operating concept helps maintain a consistent palletizing process while reducing manual pallet-loading activities.Installation Requirements & Site PreparationIn... Ksdozvprrepfx Akwonc