Used Rs Rs for sale (6,486)

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Njdpfx Akjz I Tt Ioijlh Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale is our Viscom AOI/AXI inspection system. - Manufacturer: Viscom SE, Hanover - Type: X7056 RS - Inventory No.: ZES203249 - Year of manufacture: 09/2012 - Serial number: 101682 Nljdpfx Aksxt Dkdoieh - Operating system: Windows 7 Professional, 64-bit - Software version: 9.00.7 - Camera configuration AOI: 8M (4x orthogonal, 8x angled) - AXI sensor: 5 XRAY detectors (image intensifiers) Power-on time: 92840 h XRAY-on time: 11462 h Condition of the X-ray tube: 5 (like new) The system is located in our warehouse and can be inspected at any time: Buchenstraße 18 / 93426 Roding The system has been inspected by our technician and found to be in good working order.

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Structure: This machine features a bottom seal system suitable for fragile or heavy items. Nljdpfeywzhkex Akijh Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary.

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Njdpfxjwmw Dae Akijlh

Condition: good (used), Equipment: 3rd hydraulic function, ATP certification, *Title:* HYTORC B10-ST4 Vestas Set + RS12 Stealth Power Head + ENERPAC Pump - with documents - TOP Njdpfx Ao Aazbdjkislh *Description:* Selling a complete HYTORC hydraulic torque wrench set for Vestas wind turbines from a private collection. *Scope of delivery:* - 1x HYTORC STEALTH Power Head RS12 / RSL2-70A (1000 series) - 3x HYTORC B10-ST4 cassettes 46mm - TIGHTEN - Vestas No. VT20019281 - 1x ENERPAC hand pump P-series 700 bar with hoses - All documents / calibration certificates available - ready for immediate use in wind farm service Condition: Used, fully functional. No case included. Private sale from Hungary - shipping within the EU is possible. *Price: 7,000 EUR negotiable*

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1394002, We are offering this ready-to-use Risco RS 1300 paddle mixer with a tipping mechanism for sale. Model: RS 1300 Nlsdpfez Nnmyjx Akijh The paddle mixer is fully functional and can be inspected at any time. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2016, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 32 A, The RISCO RS 5000 filling machine has been unused for a year but was fully functional until then. It requires a technical inspection. Nodpfxez Hixws Akislh

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, overall weight: 10,000 kg, - Year of manufacture: 2002 - First owner: from our own use and first hand - Fully functional, under power, ready for demonstration - Centre height: 230 mm - Centre distance: 2000 mm - Max. grinding diameter: 355 mm Nodpfjz Ru R Usx Akielh - External grinding wheel, standard: 500x80x203 mm - Surface grinding wheel, standard: 400x40x127 mm - Control: Siemens 840 D - Drive power external grinding spindle: 9 kW - Drive power internal grinding spindle: 2.2 kW - Total connected load: 25 kW - Total weight: 10,000 kg - Machine no.: 3021600302 Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: used, Year of construction: 2009, operating hours: 61,894 h, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 2,340 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, nominal power (apparent): 25 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,250 mm, total length: 6,200 mm, total width: 3,700 mm, table width: 750 mm, table height: 930 mm, table length: 1,400 mm, rotary table diameter: 800 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 12,000 rpm, overall weight: 16,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 330 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We offer this used Hedelius RS 80-K-2300 5-axis machining center, manufactured in 2009. Key Data Manufacturer HEDELIUS GmbH Type RS 80-K-2300 Year of Manufacture 2009 Power Requirement / Voltage 29 kW / 400 V / 50 Hz (25 kVA) Total Weight 16000 kg Footprint Length 6.20 m Width 3.70 m Height 3.25 m Control System Program Input HEIDENHAIN Controller iTNC 530 NC Software Version 340490 04 SP4 PLC Software Version RS80_K V1.54 Development Level L4 Operating Hours Control System On 63333 Machine On 61894 Program Run Time 28295 Travel Ranges (Total Working Area) X-Axis 2340 Y-Axis 800 Z-Axis 600 Right Working Area (Fixed Machine Table Area) X-Axis 945 Y-Axis 800 Z-Axis 600 Left Working Area (Rotary/Swivel Table Area) (simultaneous machining possible) X-Axis 800 Y-Axis 800 Z-Axis 600 A-Axis +10° / -90° C-Axis 0 - 360° Clamping Surface - Fixed Machine Table Length 1400 Width 750 Clamping Surface - Rotary/Swivel Table Length Ø 800 Width 630 Work Table T-Slots DIN 650 Slot Width 18 / 18 mm Slot Pitch 125 / 125 mm Number 5 / 5 Table Height Fixed Machine Table 930 mm Celox Motor Spindle Manufacturer Kessler Type DMS 100.XL-633.607 Speed Range 50 – 12000 rpm Tool Shank SK 40 Tool Magazine Magazine Capacity 30 tools Max. Tool Diameter Ø 80 mm (with available free slots) Ø 125 mm Max. Tool Length 330 mm Max. Individual Tool Weight 15 kg Total Magazine Weight 450 kg Special Accessories Scraper Conveyor AME GmbH Total Length ≈ 5700 Height ≈ 1760 Depth ≈ 830 Weight 515 kg Band Filter System Nedpfjz Hx Ihsx Akielh (High-Pressure Coolant System) Model PS 120 Tank Capacity 780 l Flow Rate 120 l/min Filter Fleece 670 mm 100 m on a roll Length ≈ 2320 Height ≈ 1060 Depth ≈ 850 Weight 515 kg Motor Spindle - Cooling Unit Manufacturer Hyfra GmbH Type Chilly-25-S Machine No. 09010098 Year of Manufacture 2009 Weight 65 kg Control Cabinet - Cooling Unit Manufacturer Pfannenberg Type DTS 7101 SC Model No. 08390173726 Laser Light Barrier Manufacturer BLUM Type P87.0634 Laser System MINI – MICRO - NANO Wireless Measuring Probe Manufacturer HEXAGON Model m&h Radio-wave Touch Probe Type RWP20.50-M Extra KinematicsOpt HEDELIUS Transformation Kit If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, Cable pulling machine / RAUSCH RS 6 /1300 with pulling extension & accessories -Ram stroke / stroke length - Standard 1300 mm (+ pulling extension) -Pulling force 6000 kg -Various cable pulling tools -Various accessories -Workbench Dimensions (disassembled) L x W x H 1.6 x 1.7 x 2.3 meters / Weight 3500 kg Nedoz I Dbvspfx Akislh Errors and omissions excepted.

Year of construction: 2016, condition: good (used), 1 x Ilpra Skin Packer 400 Overskin Serial Number: FP10346 Year: 2016 Vacuum gas traysealer With mould included: D13 tray 239 x 167mm. Suitable for MAP. Nsdpfjz Ehb Uox Akislh 3 Phase

Condition: used, Year of construction: 2015, Diosna RS 32 E planetary mixer Nodoz A Srrjpfx Akijlh Year of manufacture: 2015 Condition: cleaned & inspected Stepless electronic speed control Electric switchover from mixing to whipping Bowl illumination Includes 4 tools (see pictures) Includes 3 stainless steel bowls (small, medium, large) Includes 1 bowl scraper

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Electrically adjustable working table Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Inspection is possible by prior appointment. Location: Gātciems, Latvia Nledjz Dxkdspfx Akish Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI Nsdpfx Akjzhwvpjiolh History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: good (used), Year of construction: 2011, functionality: fully functional, 5-axis machining center Hedelius RS 805 K Njdpfx Aoz Iw Tfjkijlh Control system: Heidenhain iTNC 530 Year of manufacture: 2011 Internal machine number: 78 Travel ranges: X-axis 1,500 mm Y-axis 800 mm Z-axis 600 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 12,000 rpm Accessories: - Inclined bed coolant system SKM 900 - Internal coolant system 25 bar - Chip conveyor - Operating panel - Air blow guns - Flushing guns

Condition: excellent (used), functionality: fully functional, overall weight: 12,000 kg, For sale: 2 units of Untha RS 100. 1. 2 x 55 kW. 2. 2 x 75 kW. The machines have been serviced. They are fully functional. Equipment: Nedoz Dw Syopfx Akiolh Perforated screen. Electrical cabinet. Base. More technical information and pricing available upon request.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), RENNER RS-B 7,5 (7.5 bar) oil-injected screw compressor Operating hours: 0 h Pressure max: 7,5 bar Rated power: 7,5 kW Delivery quantity by 7.5 bar: 1.13 m³ / min Sound level: 78 dB (A) Compressed air outlet: G 1/2 " Dimensions length x width x height: 776 x 556 x 597 mm Weight: 189 kg Nlodpfxo Aazdre Akijh Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: ready for operation (used), functionality: fully functional, total height: 1,840 mm, total length: 1,700 mm, total width: 1,750 mm, type of input current: three-phase, overall weight: 1,850 kg, travel distance X-axis: 490 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 115 mm, grinding spindle motor power: 2,200 W, input voltage: 400 V, Tool grinding machine EWAG RS 15 TECHNICAL CHARACTERISTICS: Stroke X axis: 490 [mm] Stroke Y axis: 130 [mm] Stroke Z axis: 115 [mm] Grinding spindle motor power: 2.2 [kW] B axis swivelling stroke: 260 [°] Workpiece spindle nose: HSK 63 Variable power feeding: Yes Digital read out: RSF-Elektronik Number of axes Digital Read Out: 3 Lubrication tank capacity: 100 [l] Centralized lubrication: Yes Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight: 1850 [Kg] Nodpezzyrtjfx Akijlh Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, The RISCO RS 503 vacuum filler is a high-capacity machine from the RISCO brand, manufactured in 2005, designed for filling and portioning meat mixtures in large food processing plants. With a capacity of up to 6,500 kg/h, a portioning speed of up to 700 portions per minute, and a 350-liter hopper suited to 200 l trolleys, the unit performs well in high-volume production. How does the RISCO RS 503 vacuum filler work? Raw material goes into the 350-liter hopper, which can be fed directly from 200 l trolleys. Operating under vacuum removes air from the mass, while a vane pump with a feeding system ensures a continuous, stable flow of product to the machine outlet. The servo drive and a multifunction controller allow precise setting of filling parameters and portion size, and quick connection to other equipment such as clippers, forming machines, or packaging lines makes it possible to build complete production lines. In a configuration with an integrated RS 70 linear grinder, the machine can fill and grind the raw material at the same time. Key advantages of the RISCO RS 503 vacuum filler High capacity of up to 6,500 kg/h and a portioning speed of up to 700 portions/min allow continuous work with large batches of raw material, which is crucial in high-volume plants. The large 350 l hopper matched to 200 l trolleys reduces the number of refills and shortens downtime. Vacuum operation improves the uniformity and structure of the mass and limits air pockets in finished products. The servo drive and simple parameter control make it easy to adapt the machine to different recipes, and the solid construction with a weight of approx. 1,060 kg ensures stable operation under intensive use. Nledez N A Raopfx Akijh Technical specifications of the RISCO RS 503 vacuum filler Manufacturer: RISCO Stuffer model: RS 503 Year of manufacture: 2005 Filling machine power supply: 400 V, 3 phases, 50 Hz Installed power: 14 kW Filling machine weight: approx. 1,060 kg Filling capacity: up to 6,500 kg/h Portioning speed: up to 700 portions/min Hopper capacity: 350 l (for 200 l trolleys)

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Technical Specifications • Screen Drum Diameter: 1,200 mm • Working Length: 2,300 mm • Drive Power: 55–132 kW • Dimensions: o Length: 3,600 mm o Width: 2,600 mm o Height: 2,300 mm o Height with Open Cover: 4,100 mm • Screen Perforation (Standard): 2.5 mm Njdpfx Akjwm Nfveislh • Throughput Capacity: o Rigid Plastics: Up to 4.0 t/h o Films: Up to 1.8 t/h

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 4052, Horizontal flow pack packaging machine sold with: - Conveyor - Labeling machine - Inkjet printer Very little used, in excellent condition. ALL WRAP RCN270 packaging machine, year 2012 Linear speed: up to 25 m/min Bag width: from 30 to 270 mm Bag length: from 50 mm to unlimited Product height: up to 25 mm Production rate: up to 150 cycles/min per lane Reel diameter: 400 mm (standard) AVERY DENISON labeling machine, type ALX 734LH: Print speed: 50 to 400 mm/s Max print width: 104 mm Ribbon width: 20-140 mm Label output: up to 400 labels Label width: 30 to 134 mm Label length: 25 to 225 mm Core diameter: 38, 76, 102 mm Roll diameter: 300 or 400 mm Nsdpfjy A Hf Sex Akiolh DOMINO A320i inkjet printer Conveyor: Conveyor belt width: 100 mm Conveyor belt length: 2000 mm Dimensions: 2000x595 H 1240 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 2010, 1 x used & fully reconditioned cross-cut saw Manufacturer: Rima System Nedpfxjz Rvzuj Akiolh Model: RS 36 S Year of manufacture: 2010 Condition: fully reconditioned & ready for production, with warranty Delivery time: approx. 5-6 weeks The pictures show the machine in its current condition. The machine will be thoroughly inspected, fully reconditioned, and extensively tested in our workshop.

Condition: good (used), Year of construction: 2007, functionality: fully functional, • Manufacturer: PAK-PROJEKT (Vrnjačka Banja, Serbia) • Machine type: RS-1200 • Serial number: 02 • Year of manufacture: 2007 • Application: Machine for individual cardboard packaging Nlodpfx Aszvdf Hekish • Cutting cardboard sheets to size. • Scoring, i.e., creating creases to facilitate the bending of the cardboard. • Cutting corners and slits necessary for assembling the box. The machine is in fully working order. Output quantity depends on the size of the cardboard box – 250-800 pieces/hour.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Nljdpfx Asw Ighiokijh Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: like new (used), Year of construction: 2017, GUK RS 21/070 Roller Folding Machine This automatic machine is an add-on unit for packaging lines. Suitable for brochures with 4 folding pockets. Technical data: Folding unit: 210 mm feed width Output up to 300 sheets/min Nlsdpfeyuybpex Akish Min. format (W x L): 60 x 105 mm Max. format (W x L): 210 x 340 mm Manufacturer: GUK Year of manufacture: 2017 Space requirement: 130 x 70 x 80 cm