Used Rema Ds 12/200 for sale (37,022)

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Dsdpszwgt Nofx Ac Uswb Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Condition: ready for operation (used), Year of construction: 1996, Grinding wheel diameter: 280 mm Grinding wheel width: 30 mm Dwodpfjzhu Dwsx Ac Uob Grinding wheel speed: 2900 rpm Electrical connection: 400 V, 0.9 kW Space required: 600 x 270 x 1100 mm

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder Dsdpfxspix N Ie Ac Uewb -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/410/H1070 mm -Weight: 72 kg

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts Dwedpspix Nvofx Ac Ueb -Dimensions: 430/420/H1130 mm -Weight: 80 kg

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm Dwjdpjpcmt Nofx Ac Usb -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 480/450/H1060 mm -Weight: 143 kg with pallet

Year of construction: 1988, condition: good (used), machine/vehicle number: 108267, Steel grinding machine Offer number: 20064 Manufacturer: REMA Type: DS 12 ST Machine No.: 108267 Year of manufacture: 1988 Dwodpfx Asfhy Shsc Ujb Technical data: - Grinding wheel diameter: approx. 125 mm - 2 wheel speeds: 1450 / 2200 rpm - Right and left rotation - Tilting, fixed support table ATF: 340 x 150 mm - Support table, tiltable from -5° to +15° - Lighting - Drive: 400 V / 0.65 / 0.9 kW - Working height: 1000 mm - Space requirement: approx. W 850 x H 1150 x D 550 mm - Weight: approx. 120 kg

Condition: used, Year of construction: 2005, grinding wheel diameter 200 mm wheel width max 32 mm grinding wheel hole diameter 51 mm grinding wheel speeds 2900 U/min engine output 0,9 kW Djdsw Nrvuspfx Ac Uswb Double wheel grinder mounted on stand

Condition: good (used), I am selling a Rema DS 12/ST in good condition. Dwedpfx Asu Uvv Toc Ujb

Year of construction: 1992, condition: good (used), machine/vehicle number: D 49468, Offer 18014 Technical data: - Grinding wheel diameter approx. 125 mm - 2 wheel speeds 1450 / 2200 rpm - Clockwise and counterclockwise operation - Adjustable, fixed support table ATF 340 x 150 mm - Support table can be tilted from -5° to +15° Dwedpfx Acsk Rarts Uob - Illumination - Drive 400 V / 0.65 / 0.9 kW - Working height 1000 mm - Space required approx. W 850 x H 1150 x D 550 mm - Weight approx. 120 kg

Condition: good (used), Double bench grinder, double grinder, bench grinder, bench grinder Dwsdpfxjnymgas Ac Usb -Manufacturer: Rema, double bench grinder type DS 1/200 -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/420/H1420 mm -Weight: approx. 72 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 044092, Offer 22148 Technical data: - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm Dwedpeiba R Njfx Ac Uob - Disc speed: 1450 rpm - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Bracket for wall mounting

Condition: excellent (used), Cup wheel diameter: 180 mm Cup wheel speed: 2,900 rpm Electrical connection: 380 V, 2,900 rpm, 0.9 kW Dwodpjw Tk Nuofx Ac Uob Oscillating table dimensions: 200 x 350 mm Oscillating table, tiltable Oscillating table swivels +/- 20° Required space: 750 x 350 x 1,270 mm

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Dwedpfxebx Elis Ac Ueb Space required: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V, 1/3 power loss), accordingly 0.6 kW

Condition: used, machine/vehicle number: 053051, grinding area: 200 x 25 mm Djdpfx Acjbfp Ixj Uswb electrical connection: 380 V, 0,5 kW space needed: 550 x 450 x 1100 mm weight: 95 kg

Condition: used, rotary table dia. . mm max. dia. of grinding wheel . mm with manual ongoing . 0 manually feed . 0 Dwodpfx Acoyqu Sbs Uob 0.4 KW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Dodpoza Dwxefx Ac Ujwb Disc dimensions 175/60/51 Weight 117 kg Equipment:  2 ATS tables (spring-mounted table)  2 diamond cup wheels 175x60x51 mm  Column design

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, control type: CNC control, degree of automation: automatic, Description: For sale is a state-of-the-art JORNS JDB-200G double bending machine with extensive special equipment. The machine was developed for the economical production of complex edge profiles and enables the automatic bending of sheet metal parts without manually turning the workpiece. This reduces setup times and significantly increases productivity. The combination of the powerful CP300Twin control, Dynamic Positioning (DP), servo-hydraulic DSP drive, RH hydraulic system, automatic back gauge, and integrated SL3 shear makes this system the ideal solution for demanding applications in industrial sheet metal processing. The JDB series impresses with its high precision, short cycle times, and intuitive graphical programming. Automatic clamping fingers, servo technology, and the generous "G" tool geometry enable even complex bending profiles with maximum efficiency. Technical data: Manufacturer: JORNS Model: JDB-200G-RH-DP-SL3-1250-CP300Twin-6.4-DSP Machine type: CNC double bending machine Control: JORNS CP300 Twin Tool geometry: G geometry Material thickness adjustment: RH hydraulic Dynamic Positioning (DP) Double servo-hydraulic system (DSP) Integrated shear SL3 Dwsdpfx Acjzl Anle Uob Automatic clamping fingers Automatic material feed Automatic loading and unloading system CNC-controlled back gauge High positioning and repeat accuracy Equipment: CP300 Twin graphic control RH hydraulic material thickness adjustment DP Dynamic Positioning DSP double servo pump system SL3 high-speed shear Automatic material feed Automatic clamping fingers Vacuum gripper system Servo-driven axes Hydraulic cooling LED operating status display Extensive safety equipment Application areas: Facade construction Roof and wall profiles Ventilation and air conditioning technology Metal and hall construction Housing and switch cabinet construction Sheet metal processing Industrial series production Condition: Used Technically functional Inspection under power is possible by appointment. Maintenance and service documents available upon request. Scope of delivery: JORNS JDB-200G double bending machine CP300 Twin control Existing tools Documentation Accessories as per inspection Advantages at a glance: Highest productivity thanks to double bending technology No need to turn the workpieces Very short setup times Graphical CNC programming Precise production of complex profiles Automated material flow Robust Swiss industrial quality Ideal for series and small series production Location: Riesa, Germany Inspection / Loading: An inspection of the machine under power is possible at any time by prior appointment. If desired, we can assist with: Dismantling Loading Transport organization within Germany and Europe Commissioning by arrangement Errors, changes and prior sale reserved.

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Dwsdpfx Aozqfx Djc Uob

Condition: used, Year of construction: 1999, Technical details: pass through height: 2000 mm tank capacity: 800 l Heating: 45 KW cycle time: - sec Heating capacity: 45 kW container volume: 800 l electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 70 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.8 x 3,3 m dimensions of the machine approx. HxWxD: 3,1 x 3,3 x 3,72 m internal dimension: 1,8 x 1,0 x 1,0 m Dedpfx Aoymc Txec Ujwb *

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. Dwedpfxozy U Rus Ac Uob The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: good (used), Year of construction: 1998, machine/vehicle number: D 028005, Offer 26157 Dodszi Sx Ispfx Ac Uewb Technical data: - Grinding wheel diameter: approx. 300 mm - Grinding wheel width: approx. 40 mm - Grinding wheel bore: approx. 70 mm - Disc speed: 1450 rpm - Working height: 1050 mm - Drive: 400 V / 1.1 kW - Space requirement: approx. W 800 x H 1200 x D 600 mm - Weight: approx. 150 kg

Condition: used, We offer this used ARI Ds-73+1 Ari ds-73 ks-12. Söderhamn / Ake, year of manufacture unknown. If you have any questions or need more information, feel free to send us a message or call us. Dwodpfjy Er T Hex Ac Usb

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Dwsdpogkgwfefx Ac Uob Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-200 12 Chanel Pipetter (Button Colour-code Green) The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–200 µL range) Increment: 0.2 µL manual adjustment. Dodpfexv Dilsx Ac Uewb Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Dwedpshnc E Aofx Ac Ujb Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.