Used Promatec Chips Center for sale (17,293)

Condition: used, Chips center PROMATEC Bodpfx Asuhb Hkoc Tjwt

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Bwsdpfx Aozx A Tboc Tet Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Bjdpfsw A Nnpjx Ac Tjwt

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. Bwjdpfezxz Dfsx Ac Tot I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11045529844, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 20,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 20,000 mm, nominal power (apparent): 50 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,700 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 50 EVOLUTION CNC Universal Machining Center - Tool holder: SK 40 - Resolution of the linear measuring system X/Y/Z: 0.001 mm - Positional tolerance in X/Y/Z: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool change: 6 kg - NC rotary table with swivel axis, clamping area: 500 x 380 mm - Distance between T-slots: 63 mm 14 H 7 Bsdpfx Acozxyuis Tswt - Centering bore: 30 mm - Swivel speed: 26 rpm - Swivel range: 180° - Input and display resolution: 0.001° - Max. weight: 330 kg - Includes three-jaw chuck, diameter: 250 mm - Includes the tool holders located in the tool changer - Includes chip conveyor and coolant system Note: the machine can be transported on a standard truck! FCA D-63843 Niedernberg - loaded onto a truck

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Bodpfx Aozypmqoc Tewt Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Made in Germany.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 112258, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 Bwjdpfx Ajzvf Naoc Tjt - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 18 / 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Chip Conveyor: Included - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg - Accessories: Storage rack and tiered cart

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg Bedpjzvf Suofx Ac Towt - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: used, Year of construction: 2019, functionality: fully functional, Control System (Standard) - HEIDENHAIN TNC-640 HSCI control unit with software option 1&2 (see control system options), DCM collision protection function - 5-axis simultaneous operation - Block processing time 0.5 sec. - NC memory capacity 21 GB on SSDR memory card - USB interface - Ethernet network interface - 1024-block look-ahead function - 3D tool length compensation function - DCM (Dynamic Collision Monitoring) - TSC (Spindle Thermo-Compensation) - Tool center point control (TCPC) - smarT.NC (alternative operating mode for dialog and plain text programming in a mix, particularly suitable for beginners) Linear axes: - Travel ranges X/Y/Z: 600/600/500 mm Linear roller guides: - Manufacturer: INA - Size: 45x45 mm Linear axis accuracy: - Manufacturer: HEIDENHAIN length measuring systems - Resolution linear glass scale: 0.0001 mm - Positioning accuracy X/Y/Z axis: 0.005 mm - Repeatability X/Y/Z axis: ±0.0025 mm Rotary axis accuracy: - High-precision angle encoder for A- and C-axis - A-axis positioning accuracy: ± 30" - C-axis positioning accuracy: ± 5" Ball screw (oil-lubricated): - Manufacturer: INA - Pitch: 12 mm - Max. speed X/Y/Z axis: 36,000 mm/min Swivel and rotary axis: - Swivel axis (A): - Swivel range: +120° / -120° - Drive: Worm gear (optional: direct drive) Bodpfx Aezwxicoc Tewt - Brake: hydraulic (1,200 Nm / 50 bar) - Speed: 16.6 min-1 - Rotary axis (C): - Rotation angle: 360° (0.001° increments) - Drive: Direct drive (torque motor) - Brake: hydraulic (2,900 Nm / 50 bar) - Speed: 90 min-1 Swivel and rotary table: - Table diameter: Ø500 x 420 mm - Max. table load: 600 kg - Max. load height: 430 mm - T-slots (number / size / slot spacing): 7 x 14 mm x 75 mm Spindle: - Manufacturer: ROYAL Precision Tools Corporation - Drive type: direct - Spindle motor / SIEMENS motor 1PH8133 - Power S1/S6 (40%): 25/35 kW - Max. torque S1/S6 (40%): 134/261 Nm - Max. speed 15,000 min-1 - Spindle taper: DIN SK-40 / MAS BBT-40 (Option: HSK-A63) - Spindle oil cooler Coolant management: - External coolant supply around the spindle nose - Internal coolant supply through the spindle 20 bar with cartridge filter 40 µm, pumps adapted in the coolant tank - Number of magazine positions: 30 (optional: chain with 32, 48, or 60) - Magazine type: Carousel / Fixed position, coded - with tool change arm (double gripper) - Max. tool length: 300 mm - Max. tool diameter: Ø78 mm - Max. tool diameter: Ø120 mm with locked neighboring positions - Max. tool weight: 7 kg Chip management: - Hinged band chip conveyor Other standard equipment features: - Automatic central lubrication - High-pressure chip flushing / chip shower - Coolant gun - Control cabinet air conditioning - Coolant flushing gun - Work area lighting - 3-color warning light (cycle active / completed / alarm message) - Hand tool kit, leveling bolts, nuts, shims - EMC and safety modules for CE compliance - Portable, electronic handwheel - CE compliant with European directives - Hydraulic and pneumatic supply prepared through the table (3x 80 bar hydraulic and 1x 6 bar pneumatic connection). - Oil skimmer

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00820002981, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 3,600 rpm, spindle bore: 118 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, total height: 2,500 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 4,439 h, Equipment: chip conveyor, DMG MORI CTX BETA 800 TC CNC turning and milling center - Note: the spindle hours may increase slightly! - Swing diameter: 500 mm - Distance between centers: 1020 mm - Max. workpiece weight (chuck parts/chuck weight): 100 kg - Max. workpiece center of gravity from spindle flange: 120 mm - Travel X1: from -10 to 490 mm - Travel Y1: +-100 mm - Travel Z1: 845 mm - Travel Z2: 600 mm Bwedpezxx Dcjfx Ac Tet - Travel Z3: 800 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 315 mm - Diameter of front bearing: 160 mm - Rapid traverse speed, Z-axis: 40 m/min - Resolution, Z-axis: 0.001 mmm - B-axis max. swivel speed: 70 rpm - Angular resolution: 0.001° - Tailstock travel: 800 mm - Quill force: 8 kN The machine is equipped with a tailstock and a three-jaw chuck, diameter: 250 mm, as well as a chip conveyor and coolant system. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: good (used), functionality: unexamined, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 12,000 mm, total width: 7,000 mm, table width: 1,000 mm, table length: 4,800 mm, rotary table diameter: 630 mm, overall weight: 25,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, MATEC 30 HV Universal Machining Center Bwsdpfozxzf Asx Ac Tjt - Year of manufacture: presumably 2006 - Tool holder: SK 40 - Table with 9 T-slots - Incl. swiveling head: 360° - Incl. chip conveyor, coolant system, and safety fence Please note: the hydraulic clamping systems shown in the photos are not included in the scope of delivery! Please note: the machine can be transported on a standard truck! FCA D-72589 Westerheim - loaded onto a truck

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 5-axis machining center Hedelius ACURA 65 Control system: TNC 640 Year of manufacture: 2017 Internal machine number: 72 Travel ranges: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Rotary tilting table: Ø 650 x 540 mm Tilting range: +30° to -115° Interference circle diameter: Ø 700 mm Table load: 500 kg Tool holder: DIN 69893-1 HSK-A63 Tool magazine: 65 stations Spindle speed: 50 - 18,000 rpm ZeroClamp, 4-fold 3D measuring probe M&H 25.50 5-axis simultaneous machining ACURA Handheld control unit HR 250 3D mold making alignment ACURA KinematicsOpt TNC640 Collision monitoring ACURA/TNC Compressed air at the spindle head Bsdpfxozwuq Nj Ac Tewt Coolant system 1250l, 25 bar Chip conveyor Exhaust filter Laser light curtain for tools ACURA

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00500000321, turning length: 2,000 mm, turning diameter: 630 mm, spindle speed (max.): 4,000 rpm, spindle bore: 118 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, total height: 3,500 mm, total length: 10,000 mm, total width: 5,000 mm, overall weight: 20,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 160 A, nominal power (apparent): 110 kVA, operating hours of spindle: 14,700 h, Equipment: chip conveyor, DMG CTX GAMMA 2000 TC CNC Turning and Milling Center - Please note: the spindle operating hours may increase slightly! - Swing diameter: 630 mm - Distance between centers: 2260 mm - Max. workpiece weight (chuck jaws/chuck weight): 250/150 kg - Max. workpiece center of gravity from the spindle flange: 250 mm - Travel range B1: 240° - Travel range Z2: 1910 mm Bedpfxszxxhho Ac Tswt - Travel range Z3: 1910 mm - Steady rest clamping range DW: 45 - 310 mm, weight: 152 kg - Steady rest width C: 145 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 500 mm - Bar diameter: 102 mm - Diameter of the front bearing: 160 mm - Tool holder: HSK 63 A - Includes a 36-position tool changer The machine is equipped with a tailstock, an automatic steady rest from SMW AUTOBLOK, and a three-jaw chuck from SMW, diameter: 300 mm. It also includes additional jaws, another chuck, a chip conveyor, and a coolant system. Please note: the machine can be transported on a truck with a width of up to 3000 mm. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Bwjdpfx Aszhaqcjc Tst

Condition: excellent (used), Year of construction: 2016, operating hours: 13,100 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 620, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 3-axis machining center Manufacturer: Spinner Type: VC-450 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 13,100 h Serial number: BV XXXX Technical parameters: ----- • Travel ranges X-Y-Z: 450 x 400 x 400 mm • Work table 770 x 410 mm • Max. workpiece weight: 200 kg • Spindle: 15,000 rpm • Tool magazine: 24 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, ..paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • Chip conveyor Bedpfx Aezytzfec Tewt • Machine weight: approx. 3.5 t • Dimensions: 2,400 x 1,700 x 2,500 mm Accessories: ----- • Documentation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Kunzmann WF 650 Control system: Heidenhain iTNC 640 Year of manufacture: 2015 Internal machine number: 67 Travel ranges: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Rotary table C-axis: Ø 400 mm Tilting range A-axis: +120/-95° Rotational range C-axis: 360° Tool holder: SK 40 DIN69871 Tool magazine: 40 positions Bsdpfx Aszwmbgoc Tjwt Spindle speed: 1 – 12,000 rpm Spindle tilting range: +5 / -92° - Coolant system - Internal coolant - Electronic handwheel HR 510 FS - Chip conveyor

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC530 Year of manufacture: 2013 Internal machine number: 44 Location: Netherlands Travel distances: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm (horizontal) A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Clearance diameter: 1,600 mm, 50 rpm with torque drive Bjdpfezxp Dtex Ac Tewt Tool magazine: 60 positions Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90 kW Accessories - Chip conveyor - 5-axis simultaneous operation package - Last major maintenance in 2023 - Extraction system - Internal cooling system 70 bar - 3D measuring probe with wireless connection - Tool breakage monitoring - Handwheel with wireless control HR 550 FS

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: Bsdpfx Acszxz Hgs Tjwt - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. Bwjdpfx Acoxc I Dgj Tot As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC 0I-MD Bwedjzw N E Ispfx Ac Tet Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Technical data: Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Bsdpszwvqksfx Ac Tewt Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer Bwedpfxjd I R E Ns Ac Tst • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Accessories: Bedpfszw Dcnjx Ac Tewt - Automatic door - Operating panel - Machine hood - Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Bwedozqunhopfx Ac Tjt Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Bwsdozx Nw Tspfx Ac Tjt Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm