Used National Broach Gear Internal Honing Machine for sale (75,816)

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Type: GHC 12" Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Modu min/max.: 1,25-6,35mm weight: 3,4t Operation: honing internal teeth Djdpohad Avofx Afkeuu

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 60305, General / technical data: Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected. Duodpfx Aoiqkb Rsfksu

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t Duedpfxsycxlco Afksu max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW weight of the machine ca. 4,2 t

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm Djdpfey Ty Afox Afkjuu max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm Dsdsw Rv Tajpfx Afkouu honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel Dodpfx Afou Ngybjksuu i.D. *

Condition: used, Technical details: honing diameter: 4-31 mm stroke: 350 mm Dsdpfewx Shkex Afksuu throat: 250 mm

Condition: used, Year of construction: 1982, pulling force - max. 3 t Dusdpfjyif Nxjx Afksu max. ram stroke 1000 mm max. workpiece diameter 200 mm table-size 500 x 220 mm working area 500 x 220 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 50 mm total power requirement 6 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min Dodpfx Asyif Nlefksuu tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: used, Year of construction: 2002, honing diameter 200 mm stroke 600 mm 2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuring made for honing liners with max diameter 120mm Machine is like new because it worked only few months. Duodpfxoy Umatj Afksu

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS SINUMERIK travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. Djdpfsx Szm Aox Afkeuu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Dsdpfxoy H Ia Sj Afkeuu Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: good (used), Year of construction: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Workpiece feeder stroke: max. 630 mm - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg Transport and loading can be organized throughout Europe at an additional cost, upon request. Djdpfx Afjy H Iaxokeuu Prices plus VAT Inspection is possible by appointment. Please contact us, our team looks forward to assisting you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality, yet affordable machine for your production? Or do you wish to sell yours? For further information or contact options, reach us via the contact form.

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse. Duedpfxjt Dwb Do Afkju

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Dedpfx Afswrh H Nokeuu Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Duedpfx Afev Htlujksu Make: FORST Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Dujdpsxwdxijfx Afkeu Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 1972, condition: used, max. tractive force: 10 to, max. stroke: 1250 mm max. cutting speed: 10 m/min. max. return speed: 25 m/min. clearing: 3 pieces passage width: 470 mm spacing of the raumstellen: 125 mm table: 400 x 400 mm special equipment: Discharge of spares by permanent magnetic spares conveyor 1 hydraulics, 1 working platform, el. hydr. shaft and end piece holder fixing, automatic loading device Duedpfxecdtnhs Afksu

Year of construction: 1980, condition: used, max. tractive force: 10 to max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm turning: 3 pieces weight: 4,8 to automatic tool feeder Dsdpfscdtplsx Afkouu hydraulic drawing head and end piece holder locking device automatic loading device for workpiece diameter up to 100mm magnetic belt conveyor

Year of construction: 1959, condition: used, gr. tractive force: 16 to. gr. stroke: 1250 mm cutting speed: 5,6 m/min return speed: 30 m/min Djdpfx Afj Rwa Uekouu

Year of construction: 1960, condition: used, max. tractive force: 20.000KG max. stroke: 1250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min Duedjui Sbopfx Afkou max. workpiece Ø: approx. 140 mm max. tool Ø: approx. 50 mm, tool changeover: 2 pieces, The machine is equipped with a 2 station rotary indexing table. The machine is equipped with an automatic tool feeder, and is designed for manual series production. The tool locking in the draw bridge as well as in the tool feeder is spring-mechanical (drawing head DIN 1417).

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine. No.: 1413 General / technical data: used vertical hydraulic indoor rasping machine with up to 3 rasping points in a ready to use condition tractive force: 13000 KG (maximum) room length: 1200mm Raeumstellen: 3 pieces Spacing between the racks: 100mm Diameter of the pulling head: Ø 85mm passage width between the cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1150 x 1500 x 3725mm (tool feeder extended) Power supply / connected load: 380Volt 50HZ / 7,5KW Accessories / special equipment: The drawbridge of the machine has 3 space tool holders, the tool table has 1 space (changeable). The tool clamping system as well as the tool feeder is provided for a spring-mechanical locking (DIN 1415). The machine has an automatic tool feeder, the existing tool feeder is also available for only 1 tool (middle space). The machine has an integrated coolant system for cutting oil. Remarks: Dusdpfsdbmgmox Afkou The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production with medium batch sizes. The machine has

Year of construction: 1951, condition: good (used), machine/vehicle number: 1133, horizontal hydraulic broaching machine Karl Klink (our Ref No. WKG 1678) machine type: horizontal internal hydraulic broaching machine manufacturer: Karl Klink type: RW 10 built in: 1951 stroke 1500mm Duedpfx Afedcdrpekju pulling force: 10.000KG working stations: 1PCs drive: hydraulic system equipment: coolant system Optional accessories available on request: Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3.000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / technical data: used vertical hydraulic indoor rasping machine with 3 rasping points in a very good condition tractive force: 25000 KG clearing length: 2000mm wheel positions: 3 pieces Distance between the wheels: 160mm diameter of the drawing heads: 3 x Ø 100mm Clearance width between the cylinders: Nominal size 500mm passage width between the cylinders measured: max. 590mm Cutting speed: hydraulically infinitely variable from 1m/min to max. 10m/min Return speed: hydraulically infinitely variable from 5 to max. 25m/min Space requirement of the machine: (w x d x h) approx. 3400mm x 3400mm x 6900 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 22 KW Accessories / special equipment: The machine is currently without work table. On the machine was a workpiece sliding table mounted with a special workpiece clamping device for external broaching. (The workpiece sliding table is changeable). The tool clamping system is equipped with a hydraulic lock in the draw bridge as well as in the feeder. The machine has a coolant system with integrated chip conveyor. Dedpodffzfsfx Afkjuu Remarks: The machine is in very good condition and is still in its original paint. It is designed for serial production, for optimal use a foundation (pit) is ideally needed. Drawing heads and needles

Year of construction: 1958, condition: used, machine/vehicle number: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Dedpfsda Ugiox Afkouu Year of manufacture: 1958 Weight: 2500 KG General / technical data: used vertical hydraulic indoor rasping machine with 1 rasping point in a working condition tractive force: 6000 KG clearing length: 1000mm diameter of the pulling head: Ø 85 mm passage width between the cylinders: max. 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1000 x 1200 x 2800mm Power supply / connected load: 380Volt 50 HZ / 4KW Accessories / special equipment: The machine is equipped with a workpiece table for 1 rearrangement. The tool clamping system is provided for a spring-mechanical locking (DIN 1415). The machine has an integrated cooling system. There is a double pulling head for 2 flat broaching tools with tool support plate. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production use with medium batch sizes. For the use ideally a machine pit or alternatively a platform is needed. Drawing heads are available on request. The machine has no tool feeder. The machine can be inspected in our warehouse under power.