Vertical internal broaching machine

Rausch RS6/1000

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm Ljdpfxeyif Nls Amrjhh table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Lhjdpfsw U Uh Dox Amrsh Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Year of construction: 1973, condition: refurbished (used), machine/vehicle number: 5116/447, machine type: vertical internal broaching machine manufacturer: Rausch (Haan/Rhld) type: RS 6/1000 built in: 1973 totally rebuild in: 3/2021 by WiemersAG weight: 800kg Lodpfxegw Hvcs Amrohh pulling force: 60kN (80kN) broaching speed: 3m/min & 5m/min return speed: 10m/min maximum stroke: 1000mm maximum tool length: 1200mm table size /work surface: 610mm x 470mm (520mm x 320mm) working stations: 1 pcs drive: mechanic drive system engine: 5,5kW / 8,2kW / 8,2kW power supply: 400Volt/ 50Hz equipment: coolant system remark: machine under power in stock optional accessories available on request: tools, workpiece holder More detailed technical informations in the datasheet (german) in the annex. Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: new, Year of construction: 2019, Balancing Machine Haimer TD 2009 Condition: As new (unused) Machine weight: approx. 350 kg Terminal weight: 50 kg Spindle speed: 300 – 1100 rpm Measurement accuracy: < 0.5 gmm Smallest measurable unbalance: 0.5 gmm Pneumatics, required operating pressure: 0.5-0.6 MPa, 5-6 bar Air consumption: 30 l/h Operating voltage: 230 V Frequency: 50-60 Hz Total connection current, protected on site: 1 x 16 A Residual current circuit breaker: Type B Power consumption: max. 1.0 kVA Current consumption: max. 7.5 A Noise emission: < 70 dB Lsdjxz R Urjpfx Amrohh Protection class: IP 50 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Lhodpjw Rdvvsfx Amreh Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Further information available on request!

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t Lhjdpfx Ajwu Suvjmroh - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via Ljdpfxocxxx Rj Amrshh analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Lhodpfxsw Emyzs Amrjh

Year of construction: 2005, condition: like new (used), Quality used Bystronic Pr 100 8axis cnc pressbrake for sale BYSTRONIC PR100 x 3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake complete With Cybelec Modeva 10S Control. Manufactured 2005 – fully serviced with Bystronic uk from new Specification Year of Manufacture /new 2005 Control Cybelec Modeva 10S Back gauge Programmable Guards Fiessler AKAS Capacity 100 Ton Maximum length of bend 3100mm / 3metre Extended Daylight – to be confirmed Max stroke 315mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s Tooling top and bottom Wander type footswitch Lhsdpfx Amjhufktjreh Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Hydraulic Crowning We can quote for delivery and installation complete with operator training We can advise and supply brand new tooling to produce your sheet metal products on this cnc press brake

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Ledsgwlrdspfx Amrshh Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!