Internal broaching machine

Karl Klink RIS 6 x1000

Condition: used, Year of construction: 2005, functionality: fully functional, Horizon BQ-270 (2005) 1 Clamp Perfect Binder / Binding Type: Hot-melt Book Block Size (Paper Size for Book Block): Maximum: 320 × 320 mm / Minimum: 135 × 105 mm Book Thickness: 1 – 50 mm Cover Size: Maximum: 320 × 660 mm Minimum: 135 × 230 mm Suitable Cover Paper Weight: 70 – 260 gsm Maximum Cover Pile Height: 70 mm Production Speed: Up to 500 cycles per hour Power Requirements: AC 200 V, 3-phase, 50/60 Hz Heater Power: 2.2 kW Machine Dimensions: 2,300 (W) × 860 (D) × 1,250 (H) mm Nodpfxoxyua Ne Agwekw Machine Weight: 900 kg

Condition: good (used), Distance between centers: 1000 mm Height of centers: 175 mm Grinding length: 500 mm Maximum grinding diameter: 300 mm Working wheel dimensions (OD x ID x W): 500 x 203 x 80/100 mm Internal Morse taper: 5 Working wheel motor power: 7.5 kW Total power: 17 kW Longitudinal travel of the carriage (X-axis): 267 mm Transverse travel of the carriage (Z-axis): 650 mm CNC brand: FANUC Nsdpott Rawefx Agwjkw CNC model: 16-T Rotating range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approximate weight: 4200 kg

Condition: good (used), Vertical Turning Lathe SC33 CNC Manufacturer: TITAN (Romania) YOM: 1986 Complete revision of the machine in 2005 Main technical data: CNC Siemens 802D Faceplate diameter: 3000mm Max. turning diameter: 3300mm Max. working height: 3000mm Max. workpiece weight: 18000kg Table speed range: 1.02-92 RPM Working feed range: 0.05-5 mm/rev. Main motor power: 55 kW Overall dimensions: 5600 x 5300 x 5400 mm Weight: 47350 kg The machine is under power. Njdjw Eplaspfx Agwokw

Year of construction: 1999, condition: used, pulling force - max. 6,0 t Nedped Il A Nefx Agwokw max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m

Condition: used, Year of construction: 1966, max. tractive force 5 t, max. stroke 850 mm, max. cutting speed 12m/min, max. return speed: 25m/min, clamping surface 410x575 mm, groove width 3 - 90 mm, bore 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base under floor 1.400 mm Nksdpocm Elnofx Agwsw

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Nedpfjxg Nmksx Agwjkw Slide travel (X-axis): 1000 mm Main drive motor: 41 kW Tool changer: 30 positions Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Year of construction: 1997, condition: good (used), Built in: 1997 Size: 311 x 355 mm Speed: 9.000 c/h Equipment: gathering chain & feeder: • 8 stations chain • with double feeder • 1 folder feeder stitching unit & trimmer: • stitching unit Nsdsdym Stspfx Agwskw • 2 stitching heads • trimmer • belt delivery with counter

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. Nkedjt Hw N Hspfx Agwow * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Make: Schiess Control: Conventional Location: Germany Major overhauls: 2009 new electric with new AC main motor, 2022 overhaul of the gearbox. Condition: under power, in good condition Chuck Ø: 9500 mm Swing Ø: 10500 mm Max. Workpiece Weight: 150 T Max. Working Height: 4500 mm Ram Vertical Travel: 2250 mm Chuck Speed: up to 7.35 rpm Machine Weight: aprox. 400 T Left ram is currently dismantled but will be supplied together with the machine. Nksdpexpd Emofx Agwow

Condition: excellent (used), Dividing head Walter Type UPA 125 N (28487) direct and indirect dividing center height 125 mm Can be used horizontally and vertically Njdpfxjtrnnde Agwskw Spindle holder MK 4 KKG 3 Travel bag SPH 125 mm Mounting MK 2 Total transport weight 62 kg dividing head 48 kg