Used Multi-Trans Val 30 for sale (32,356)

Condition: used, total length: 10,500 mm, Year of construction: 2016, load capacity: 14,000 kg, Trailer Multi-Trans VAL 30 Giodpoxd Edmefx Ai Neu Drive No Drive Year built 2016 Lifting weight (kg) 14,000

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Gsdpfx Aoxrtgfei Neiu Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Gijdpfxexrtqwj Ai Nsu Main frame: Robust welded construction made of profile steel sections. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Gsdpfx Aijxrtdqo Njiu Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Gsdpjxrtb Nefx Ai Nsiu Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: excellent (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Heavy Duty industrial trailer Multi-Trans - ARL-4PA Platform height: 900mm Giodpfxsxzz E Us Ai Neu Platform length: 7000mm Platform width: 2400mm Max. loading capacity:40000T Number of axes: 2 Number of wheels: 8 Length: 7000mm Width: 2400mm Height: 900mm Weight: 120000kg

Condition: good (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Double steering Wheel diameter Giedpfx Aowq N Sdsi Neu Platform size 7100 x 2500 mm Inspection valid 11.2025 Length:7100mm Width:2500mm Height:900mm

Condition: new, empty load weight: 870 kg, maximum load weight: 2,630 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 350 mm, loading space volume: 2.5 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Drive-on ramps / rear supports / electro-hydraulics with emergency hand pump / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. drive-on ramps / rear supports / electro-hydraulics with emergency hand pump / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 35 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 870 kg - Payload: 2.630 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - 2x aluminium ramps for tipper - 2x folding heavy-duty support leg, telescopic - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - side wall attachment - 60 cm corrugated grid attachment - spare wheel - storage box - battery - 230 V charger - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Gisdou Htz Hspfx Ai Neu

Condition: new, empty load weight: 960 kg, maximum load weight: 2,540 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 950 mm, loading space volume: 6.3 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Ramps / supports / grid attachment / electro-hydraulics with emergency hand pump / ramp shaft / high front grid, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. ramps / supports / grid attachment / electro-hydraulics with emergency hand pump / ramp shaft / high front grid TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 95 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 960 kg - Payload: 2.540 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - 2x aluminium ramps for tipper - 2x folding heavy-duty support leg, telescopic - Hot-dip galvanized leaf grate, 60cm, 3-sided swinging, unassembled - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - spare wheel - storage box - battery - 230V charger - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gjdpfxou Ht Ade Ai Nsiu

Condition: excellent (used), functionality: fully functional, load capacity: 60,000 kg, Equipment: UVV, cabin, Rental and purchase possible Giedeyrf T Eepfx Ai Nsu

Condition: excellent (used), functionality: fully functional, Equipment: UVV, cabin, Rental and purchase possible Gsdpfx Aijxqp Ice Nsiu

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Gjdpfx Aiexrr Uho Neiu Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Main frame: Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue Rental or sale EU-wide.

Condition: excellent (used), total length: 10,000 mm, total width: 2,400 mm, total height: 975 mm, color: blue, Operating conditions: The trailer is designed for use on flat, paved surfaces in in-plant traffic. Combined operation: The trailer components are not (without a coupling) designed for combined operation with multiple trailers. Payload: 32 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are permissible only upon prior approval. Loading platform: Dimensions approx. 10,000×2,400 mm, loading height approx. 975 mm, platform surface covered with softwood planks, all-around edge protection. Steering: Front turntable steering, tow bar can be raised and detached, coupling height on towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, tow bar fall protection as per accident prevention regulations (UVV). Gjdjxrtkwepfx Ai Njiu Chassis: 2 steered and 2 rigid pendulum axles, wheels with elastic solid rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue. Additional equipment: On each long side, 2 horizontal round steel lashing sleeves welded into the outer frame.

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Gijdpfx Aijuf Rw Ts Nju Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. Gsdpfexrtluox Ai Njiu For rental or sale EU-wide.

Condition: used, empty load weight: 5,240 kg, maximum load weight: 35,760 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 05/2018, next inspection (TÜV): 09/2026, suspension: air, wheelbase: 1,310 mm, color: black, Year of construction: 2018, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41411 Krone, SDC 27 Highcube * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection coupling head (red + yellow) * Connecting plug 2x7-pin * Connecting plug 15-pin * Lifting and lowering device * Inspections: HU/AU valid until 09.2026 * Suspension: Air * Total weight: 41,000 kg * Unladen weight: 5,240 kg * Payload: 35,760 kg * Permissible total weight: 41,000 kg * Axle manufacturer: Krone * Wheelbase: 1310 mm * Krone SDC 27 eLTU5-2 * Height-adjustable locking mechanism * High Cube Container * Additional release valve for releasing the brake * Container accommodation: 1 x 40' container with tunnel, 1 x 45' container with tunnel * 2 x 20' containers * 1 x 20' container, flush at the rear * 1 x 20' container, centered Disclaimer: Subject to change, prior sale, and errors. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transfer of commercial vehicles Giodpfx Ajzc Uhtoi Neu Please ask our trained specialists; we will be happy to advise you.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2021, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2021, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 4 Technical condition: good Visual appearance: good Giodpfx Asy Nwp Usi Nju Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Renders Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.600 kg Giodpfx Aioy Nwpzj Nou Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 5 APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, empty load weight: 1,630 kg, maximum load weight: 970 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,300 mm, loading space volume: 15.7 m³, color: black, construction height: 2,680 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 2 - Gross vehicle weight: 1,630 kg - Unladen weight: 970 kg - Payload: 1,630 kg - Interior dimensions: 378 x 181 x 230 cm (L x W x H) - Overall exterior dimensions: 503 x 229 x 268 cm (L x W x H) - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100 km/h: Included! - incl. vehicle documents Vehicle superstructure: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: full polyester - Colour: black - Tack room: yes, large saddle compartment - Tack room equipment: luggage net, saddle holder, make-up mirror, bridle holder, lockable door, door holder - Feed troughs: no, optional - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 106 to 127cm, adjustable - Distance between stall bars: 173 to 205 cm, adjustable - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: no - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Approval: COC papers, approval with green license plate possible for sports purposes Standard equipment: - Pullman2 chassis independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tying possibility outside - Tying possibility inside - Stainless steel tie rod mounted on the right + suitable for feed troughs - Floor-to-ceiling ALU entrance door on the right + sliding window + aluminum handle, lockable - Tack room inside XXL with swiveling saddle holder - PVC transparent partition wall - Single wheel mudguards, plastic (black) - many sliding windows - rubber glued to floor and sealed - hay net hooks - step protection on side walls (GRP plastic) - maneuvering handle - tarpaulin roller blind as net - lifting device gas pressure shock absorber on tailgate - step on rear flap - 3rd brake light on rear flap - light Light system with reversing light - 13-pin plug Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Feed trough for hanging with holder - Video surveillance system incl. reversing camera - Anti-theft device New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Godpfsu Hrthox Ai Nsiu

Condition: used, maximum load weight: 509 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,950 mm, loading space width: 1,600 mm, loading space height: 120 mm, total width: 2,240 mm, total height: 830 mm, Multitransporter 3016, manufacturer TEMARED, model DMC, gross weight: 750 kg, 295x160 cm, with overrun brake, 100 km/h (accessory), with foldable loading ramp (accessory), low loader, height-adjustable. Subject to errors and prior sale. Godpsym Ih Iofx Ai Neiu

Condition: used, mileage: 115,556 km, power: 107 kW (145.48 HP), first registration: 07/2014, overall weight: 5,200 kg, fuel type: diesel, color: orange, next inspection (TÜV): 06/2026, gearing type: mechanical, emission class: euro5, loading space width: 1,500 mm, loading space length: 2,050 mm, loading space height: 700 mm, Year of construction: 2014, number of seats: 5, Equipment: ABS, all wheel drive, parking heater, * German vehicle from municipal ownership, 1st hand * Very good condition, fully serviced with complete service history * Switchable 4x4 all-wheel drive * 5-speed manual transmission * Webasto auxiliary heater * Differential lock * Creeper gear * 5 seats * Rotating beacon * Balloon tyres 315/55 R16, 70-80% Giedpfoyy Tu Ijx Ai Nju * Tow bar with ball-head, 3,500 kg towing capacity * 2,355 kg payload * WhatsApp: * Polish contact, ...: * Sale only to businesses, sold as-is without warranty, all information subject to change, prior sale reserved

Condition: used, maximum load weight: 949 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 4,010 mm, loading space width: 188 mm, loading space height: 110 mm, total width: 2,450 mm, total height: 860 mm, A13 GW2616429 Multi-transporter 4018, manuf. TEMARED, type DMC Gross weight: 1300 kg, 400x184 cm, overrun braked, 100 km/h (accessory), with foldable loading ramp (accessory), low loader, height-adjustable Loading height: 400 mm Gjdpfx Aioym Igdo Neiu Subject to errors and prior sale

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm Godst D R R Eopfx Ai Nsiu belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1992, Transnorm belt curve conveyor 30°-800-700 IR900 right RA2256 Technical data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 30° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Overall height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor, SA42 DT71D-4 Electrical data: 380-500 V, 0.37 kW Conveying speed: please contact us Scope of delivery: without supports (please enquire if required) Optional: Supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Gjdpfxorrxc Ds Ai Neiu Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Giodpfxjk Abuis Ai Nju We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics