Used Maschinentritt Stahltreppe Stahltreppen Bautreppe / Höhe: Ca. 515 Mm for sale (75,214)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Steel stairs / Machine steps used Floor height : ca. 515 mm projection : ca. 590 mm total width : ca. 700 mm Iodpfehhxu Hsx Am Ieia mesh size : approx. 25 x 25 mm material color : yellow Step dim.: 1x approx. 675 x 250 mm ( upper step ) 1x approx. 475 x 250 mm ( lower steps) Number of steps: 2 pieces / steps inserted step height : approx. 265 mm General information about the article: This item is offered for pickup only. A transport desired beyond that or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: Isdpfxsvnr Rrs Am Ieia This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. Iiodpfxsvntb Se Am Ioa The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Iedpovntmnofx Am Ioia Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x U- collision protection, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 100 x 50 mm profile dim. outside: U: approx. 80 x 40 mm material thickness: approx. 6,00 mm base plate dim.: approx. 200 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 04 pcs. Your contact person in our company: Mr.: Andre Evering Iedpfx Amjn R Edme Ieia Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Iijdpsn R Egzefx Am Isa Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: Iisdek T Au Eepfx Am Isa 01x U- collision protection corner, used Material color: orange total height: approx. 350 mm total width: approx. 200 mm inside width: approx. 160 mm total depth: approx. 360 mm inside depth: approx. 240 mm leg dimension: approx. 140 x 140 mm foot plate dimension: approx. 340 x 200 x 8 mm material thickness: approx. 6,00 mm Drill hole Ø: approx. 16 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 14,850 Kg General information about the article: This article is offered for pickup only. Any further transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Iiedpfeh Hf Rmsx Am Iea Mr.: Falk Deutsch Included in delivery 01x railing post, used Material color: blue total height: approx. 1.110 mm total width: approx. 110 mm total depth: approx. 62 mm base plate: approx. 120 x 110 x 12 mm ( W x D x H) Diameter of round tube opening: approx. 48 mm Distance center-center-hole: approx. 465 mm Material thickness: approx. 2 mm Weight pcs.: approx. 5,07 Kg Notes: - The railing post is open when viewed from the top. - The heights of the round tube openings are: 565 mm and 1.030 mm. ( Measured from the lower edge of the base plate to the lower edge of the round tube opening ) - suitable for round tubes with a diameter of 45 mm General information about the article: This article is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, The scope of delivery includes: 01x stand protection, used Manufacturer: Bito Material color: yellow Total height: approx. 715 mm Total width: approx. 99 mm Inner width: approx. 92 mm Leg dimension: approx. 65 x 65 mm Material thickness: approx. 3.5 mm Weight per unit: 4.96 kg. 04x screw M10x40 mm 04x nuts M10x40 mm 04x spacer sleeve 14x1.5x21 mm Your contact persons in our company: Iiodpott R H Aofx Am Isa Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 02x shelf stand, used Material color: sendzimir galvanized upright profile: 85 x 75 x 2,00 mm Iijdpsdvgxiofx Am Ija upright height: 1.455 / 1.300 mm upright depth: 1.100 mm 04x shelf traverse, used material color: orange box profile: 120 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized 03x wire grating, new material color: sendzimir galvanized Execution: mounted shelf gratings, canted on both sides depth: (bearing bar direction) approx. 1.125 mm for upright depth: approx. 1.100 mm clear width: approx. 965 mm width: approx. 885 mm crossbar support: approx. 65 mm mesh width: approx. 95 x 45 mm material thickness wire: approx. 4,5 mm maximum loadable up to 800 kg with evenly distributed load 03x Trapezoidal sheet, II. choice Color outside: RAL 8012 red brown Color inside: similar to gray-white Sheet length: 1.500 mm Panel width: 1.075 mm Cover width: 1.035 mm Profile: 35 / 207 01x verge angle, new length: 3.000 mm Material color: RAL 8012 red brown size: 100 x 100 mm thickness: 0,75 mm Finish: 90° folded 25x screws 5,5 x 40 mm A2 max. drilling capacity: 13 mm with 16 mm sealing washer, drill point u. Approval ETA-13/0183 06x screws, 4,8 x 20 mm galvanized, self-tapping for wooden substructure Technical data of the firewood shelter: Total width: approx. 2.900 mm total depth: approx. 1.515 mm total height: approx. 1.535 mm volume to be stored: approx. 3,15 m³ Information: The pictures are sample pictures for clarification of the construction. to illustrate the construction. The material color of the stands and trusses shown may differ. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Iedpfx Ajhputhjm Isia The scope of delivery includes 01x crash barrier, used Total length: approx. 2,575 mm Clear width: approx. 2,400 mm Total height: approx. 600 mm Consisting of each: 02x frame profile, used Material color: blue Profile dimensions: approx. 100 x 79 x 3.0 mm Clear width: 2,300 mm 02x Post, second-hand Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded-on screw-on plates: approx. 200 x 80 x 10 mm Square profile: 90 x 90 mm Weight / piece: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, Year of construction: 2026, Included in delivery: 01x End Bracket Extension, new Material color: electro-galvanized Design: universal Total height: approx. 657 mm Usable height: approx. 500 mm Telescopic depth adjustment: 600 – 1,150 mm Iisdpfxjvbbtio Am Ija Frame profile: L-profile 45 x 45 mm Material thickness: approx. 5.00 mm Square tube: 25 x 25 x 1.50 mm (outer) Square tube: 20 x 20 x 1.50 mm (inner) Adjustment grid: 25 mm Hole pattern: 5 x 25 mm Weight per piece: approx. 6.87 kg Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping of this item is required, this will incur additional costs, which can be quoted separately depending on location and scope of delivery.

Condition: used, Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, die / hemming tool Iiodegwhvaspfx Am Ioa -Measures: see drawing in the photos -Dimensions: 150/101 / H75 mm / 150/77 / H159 mm -Weight: 7.2 kg / 11.4 kg

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideally suited for storing heavy long goods such as pipes, profiles, metal rods, steel beams, wooden battens, and sheet material. With a total length of approx. 13.20 meters, a height of approx. 4.00 meters, and cantilever arms of approx. 120 cm, this long goods rack offers high storage capacity across a total of 4 storage levels (foot level plus 3 additional tiers). Each cantilever arm supports up to 500 kg, and each upright can be loaded up to 2,250 kg. The cantilever arms are bolted and their height can be flexibly adjusted in 200 mm increments using the perforation grid. The fully hot-dip galvanized material ensures long-lasting protection for indoor and outdoor use – new stock available from our warehouse in Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever rack - Total rack row length: approx. 13.20 m - Overall height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) Iiedpfey A Hzgsx Am Iea - Axial distance (upright spacing): approx. 131 cm - Levels: foot level plus 3 storage levels - Load capacity per arm: max. 500 kg (with even load distribution) - Load capacity per upright: max. 2,250 kg (with even load distribution) - Upright profile: IPE 160, approx. 400 cm, incl. base - Upright perforation grid: approx. 20 cm - First perforation above base: approx. 107.5 cm (top of base) - Uppermost pair of holes: approx. 50 cm below upright head (top of upright) - Design: single-sided, bolted cantilever arms - Surface: fully hot-dip galvanized - Availability: New / B-grade return stock available from Wietmarschen warehouse SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made from IPE 160, incl. base, 20 cm perforation grid - 33 x cantilever arms, approx. 120 cm made from IPE 80 (without stoppers) - Incl. all connecting elements - Incl. all required bolts - 1 x load capacity sign Price: €5,660.00 net €6,735.40 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Delivery throughout Germany by our partner hauliers – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our design department will be happy to prepare a non-binding quote tailored to your requirements. Whether new construction, modification, or expansion – we offer expert advice for your rack configuration. Still haven’t found the right solution? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone call. You will find our phone number on our company page. You can reach us by phone Monday to Friday, 8:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth Iedpfx Amsmhhyps Ieia - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Iodpfx Aomhh Dhjm Isia - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Iiedpemhh Dzofx Am Ioa When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Iiedpemhhx Ijfx Am Ija - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Iodpjmhhyasfx Am Ieia - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Iedpfxjh Ek Dae Am Ieia - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Iijdpfx Amsmhh Ano Ija Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. Ijdpfxsmhhf Se Am Isia According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Iodpfxemhhl Ho Am Ioia Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) Isdpfx Amomidyfo Ioia - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg Iijdpsmkixwofx Am Ioa - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.