Used Hygromatik Humidifier for sale (46)

Condition: used, Humidifier, Humidifir, Humidificateur, Hymidificador -Handover: in its current condition as inspected -Control unit: does not switch -Rated output: 13 kg/h -Operating voltage: 380 V -Power requirement: 9.8 kW -Quantity: 1 piece available -Dimensions: 360/530/H995 mm Gisdpsb Uf N Aofx Ai Nju -Weight: 38 kg

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier Base Board, Steam Generator Board Giedpfx Aey Awxiei Nju -Manufacturer: Hygromatik, MP humidifier control display -Type: MP E-2522450 -Dimensions: 155/50/H95 mm -Weight: 0.3 kg

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Steam Cylinder -Manufacturer: HygroMatik, steam cylinder for steam humidifiers/steam generators -Type: unfortunately without type designation -Accessories: including 6x electrics / 1x sensor electrics installed, see photos -Quantity: 2x containers available -Price per piece -Dimensions Ø 372 x 660 mm Gjdpspb Ea Esfx Ai Noiu -Weight: 7.6 kg

Condition: excellent (used), functionality: fully functional, Humidifier installation This system was used in an office building. Gjdpfx Aoy Alr Rsi Neiu A total of 3 of these units are available. Length: 1,570 mm Width: 570 mm Height: 1,530 mm The listed price is per unit.

Condition: excellent (used), functionality: fully functional, Condair humidifier, Godpfx Aiey Alurj Nsiu Currently still in use in an office building. Dismantling scheduled for mid-September. Length: 1,600 mm. Width: 710 mm. Height: 1,700 mm. Estimated year of manufacture of this machine: November 2018.

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Outdoor unit 4x8 kw heating wire 32kW Gijdpefl Iquofx Ai Nou 160 ° C max

Condition: excellent (used), Here we offer you Defensor steam humidifier. Defensor Mk5 Resistance Steam Humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifier is built according to the current state of the art and the recognized safety regulations. Nevertheless, in the event of improper use of the Defensor Mk5 steam humidifier, hazards may arise for the user and/or third parties, and/or or material assets may be damaged. To ensure safe, proper and economical operation of the Defensor Mk5 steam humidifier, please observe and comply with all the information and safety instructions contained in these installation and operating instructions. Giedpfx Aonyh T Dji Neu Defensor Mk5 type series Visual For indirect or direct room humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 max. steam capacity in kg/h 80.0 400V/3~/50...60Hz Mk5 ... 80 unit A: 40 kg/h unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 -Type: M4 Gjdpjd Tq Rxsfx Ai Neiu -Weight: 0.3 kg

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier The Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be regular tap water or fully demineralized water. The heat generated by the heating elements heats the water to a temperature of 100°C. Technical specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4" G male Steam distribution For optimal humidifier performance, the produced steam must be distributed evenly throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with vented steam distributors or steam lances. The choice of steam distributor depends on the room into which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), vented steam distributors (optional) with a motorized fan should be used. Gedju Eb A Nepfx Ai Neiu However, if steam is to be distributed via ducts or air handling units, Steam lances are used, which utilize the speed of the air flowing through them for humidification. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Humidifier for ventilation construction - Klingenburg A total of 4 pieces are available. The price is per piece! Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested Gedpfetzxtvex Ai Njiu condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Gisdoyzaamopfx Ai Neu Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: excellent (used), Year of construction: 2009, The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear design. Key features of the K-MT series adsorption dryers, such as: • one-piece adsorber profiles • separately controlled main and discharge valves in a leak-free design • compact check valve combination, guarantee continuous operational reliability and high availability. All K-MT series adsorption dryers feature: • self-cleaning screen trays on the wet side • high-quality desiccants During adsorption, the desiccant stores the moisture contained in the compressed air. Parker Zander uses exclusively highly active, high-capacity molecular sieve desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place in the opposite direction to adsorption. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerated adsorption dryers is based on: Operating pressure 7 bar Inlet temperature 35°C Gsdpfxoypb Dus Ai Nsiu Pressure dew point -40°C for a cycle with: - 5 minutes of adsorption - 4 minutes of desorption - 1 minute of pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load cycles per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load cycles per hour and therefore inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs with reduced wear. Multitronic, the control system with groundbreaking new functions and a new design, is perfectly tailored to the K-MT series of cold-regenerating adsorption dryers. It allows for highly effective adaptation of the adsorption dryer to even the most diverse operating conditions. From the continuously visible status to the pressure dew point control of the adsorption dryer, the benefits for the operator are readily apparent with Multitronic. Housed in a clear and easily accessible control cabinet, the Multitronic system offers: • user-friendly microprocessor control for all Parker Zander Heatless dryer systems • flexible cycle time settings. • Front-panel LEDs for individual functions such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as synchronization with the compressor Optional features: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit • The ability to set the desired dew point in the range of -25°C to -40°C Technical specifications: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection watts: 50 Year of manufacture: 2009 Manufacturer's price: €8,880 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer Giedpjx Eifkjfx Ai Nsu manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Godpjtty Rajfx Ai Nsiu Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024 Giedpfx Aiouy Thmo Nsu

Condition: like new (used), Year of construction: 2022, overall weight: 250 kg, BOGE DS 350 refrigerant air dryer Giedpfoxcb Edjx Ai Nsu

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, overall weight: 128 kg, ambient temperature (max.): 46 °C, pressure (max.): 13 bar, MACHINE DETAILS Weight: 128 kg Gjdpfxjydnyxs Ai Noiu Max. air pressure: 13 bar Max. ambient temperature: 46 °C

Year of construction: 2014, condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 30 CAPACITY 3 M3/MIN, YEAR OF PRODUCTION 2014 THE DEHUMIDIFIER IS FULLY FUNCTIONAL. Giedpfei Atudox Ai Nju

Condition: excellent (used), Year of construction: 2015, Refrigeration dryer BOGE DS 95 Capacity 9.5 m3/min year of manufacture 2015, Godpfx Ajk Nb T Dji Nsiu THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: used, functionality: unexamined, For sale: Air Dryer Type FD 120 3x380/415V; 50Hz Serial no. 302210 Net price: EUR 1,100 negotiable. Gedpeyutnpefx Ai Njiu

Year of construction: 2021, condition: like new (used), For sale Food Dryer - Dehumidifier. Used a few times. Gjdpfoibwb Tsx Ai Neiu Max. indoor temperature: 60 degrees Celsius. Flow rate: 4500 m3/h Shell for products: 25 psc. Power required: 220V 50Hz More parameters in photos. If you have an questions on this, please do not hesitate to contact us.

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Testing Device Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion testing device / salt spray chamber for salt spray, condensation water, and combined testing. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Giedpfjzba N Tjx Ai Nsu Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption (humidifier): approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling volume (bottom trough system): approx. 15 liters Testing procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used device from industrial application. Optical condition according to the pictures. Interior with visible deposits / corrosion traces. Device can be switched on, display is active. A complete technical functional test under test conditions was not performed by us. Inspection possible by appointment. Scope of supply: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and data sheets. Errors and changes reserved.

Condition: good (used), Weiss SC 450 Corrosion Testing Equipment Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing equipment / salt spray test chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Gsdpfszbatrex Ai Nsiu Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Temperature stability over time: ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray channel Heated compressed air humidifier Flow and dosing device for brine Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Test procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Condition Used equipment from industrial use. Operating hours according to display: approx. 37,926.6 h Optical condition according to pictures. Interior with visible deposits / corrosion marks due to use. The device can be switched on, display is active. A complete technical function test under test conditions has not been carried out by us. Inspection and testing on-site are possible by arrangement. Scope of delivery: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and manufacturer data. Errors and changes excepted.

Condition: not inspected (used), Year of construction: 2010, MERLIN SK 613 Humidification System, approx. 2010 ----- Gijdeyn R H Njpfx Ai Nju Consisting of: - 1 x Pre-filter and water softener - 1 x Water hydraulics (high-pressure pump) - 2 x Humidity sensors - 6 x Humidifier modules RG - 14 x Humidifier modules MD 1 ----- Original price was approx. €24,000 (excluding installation) (Technical specifications according to the manufacturer, without guarantee!)

Condition: new, Finiture Paint Line for Windows and Doors ----- Short description: Item 1: 1x Double-rail overhead conveyor Item 2: 1x Traverse rotation unit with one coupling Item 3: 1x "Superjet" flood coating system Item 4: 1x High-pressure humidifier Item 5: 1x Wastewater separation system Optional: Flood channel or dipping tank (5–6 basins) For detailed technical description and layout, please see the PDF attachment! ----- Price of the above-mentioned paint line on request! Gijdpfxsy D A Hho Ai Nou ----- (Technical specifications according to manufacturer – no guarantee!) All prices are net plus statutory VAT.