Used Hidroliksan Hydraulic Portal Straightening for sale (16,830)

Condition: new, Year of construction: 2025, HYDRAULIC PORTAL STRAIGHTENING MODEL HSPS400 / 400 TON Ram Cylinder Capacity (Ton) 400 Ton at 250 Bar Min. Working Pressure (Bar) 30 Bar Max Working Pressure (Bar) 250 Bar (25 Mpa) Cylinder Diameter Ø450 mm * 1 Pc Stroke (mm) 1000mm Daylight (mm) 1300mm Table size (mm) 6000 x 3100 mm Cedpfx Aowbtlvjixjrf Travel size (mm) 4700 x 2600 mm Advance Speed (mm/sec) 7 mm/sec Return Speed (mm/sec) 14 mm/sec Working Speed (mm/sec) 3-7 mm/sec Motor (Kw) 25.1 KW Pump (liters) 45 CC BOSCH Rexroth Overall dimension (LxWxH) 5500 x 7000 x 4200 mm Weight (Kg) Approx. 45,000 KG

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Crsdpfx Aieh Agnuoxef Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine Crodjvgu Haopfx Aixef -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: good (used), Hydraulic straightening press Cjdpfx Aiozkg Igsxsrf Manufacturer: G + K Year of manufacture: 1992 Max. pressing force: 130 t Table size (bottom): 800 x 500 mm with T-slots Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 AC, 24 DC Control system renewed 5 years ago The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. A throttle valve is installed on the hydraulic unit to adjust the pressure.

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Technical data: - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm Crjdpfx Aozh Edbsixsf - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm - traversing carriage with mounts on the straightening table - pointed die holder - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer as a custom order. We can manufacture this machine for you again on short notice – and are happy to accommodate individual options. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and machining processes on large-format components. Base price: €142,000 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually expanded with additional features and configured to project requirements. Cedpoyxnzyjfx Aixorf - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various configurations possible) ===== Technical Data & Information: ==== General Information Design: Portal press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Cable drag chain system - Two-coat paint finish (RAL colors selectable) ===== Straightening of large steel structures, vehicle manufacturing, maintenance, assembly work, special constructions. Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our key strength is special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: refurbished (used), PORTAL STRAIGHTENING PRESS PRESSURE 450t WORKING AREA Cedpjfcnu Isfx Aixorf LONG: 5200mm WIDTH: 2300mm HEIGHT: 1000mm

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system Crsdsdzqptspfx Aixsf - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Codpsd Swtaefx Aixjrf Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: good (used), Saxon Bag Sealer With Reverse Facility Credpov Dm Epefx Aixsf With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: new, Year of construction: 2026, pressing force: 60 t, stroke length: 400 mm, clearance between the columns: 820 mm, - Capacity: 60 tons - Cylinder stroke: 400 mm Crodpfoy Uahdsx Aixef - Working width: 820 mm - Electrically or manually operated - Pressure gauge - Emergency stop - 400 V

Condition: new, stroke length: 400 mm, distance between stands: 2,000 mm, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 2000 mm - Electrically or manually operated - Pressure gauge Crodpfx Aiswbutujxef - Emergency stop - 400 V

Condition: new, Year of construction: 2026, pressing force: 80 t, stroke length: 400 mm, - Capacity: 80 tons - Cylinder stroke: 400 mm - Working width: 920 mm - Electrically or manually operated Crjdoy T Sntepfx Aixsf - Pressure gauge - Emergency stop - 400V

Condition: new, Year of construction: 2025, pressing force: 60 t, - Capacity 60 tons Cedpfxor Ei Ste Aixorf - Cylinder stroke 400 mm - Working width 820 mm - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Condition: new, pressure 30 t stroke 170 mm distance spindle /table max. 700 mm Front light range 600 mm Lateral light range 195 mm weight of the machine ca. 200 kg dimensions 670 x 970 x 1900 mm Domestic equipments: - Stable welded construction - manually via hand lever Crjdpey Nnywefx Aixsf - Pressure gauge via pressure gauge - CE mark

Condition: ready for operation (used), Wingspan: 3950 mm Overall height: 3650 mm Load capacity: 4000 kg without lifting device Crjdpfx Aiezp Iqgoxjf

Condition: new, pressure 200 t stroke 400 mm cylinder diameter 170 mm work height max. 900 mm Front light range 1330 mm Lateral light range 450 mm total power requirement 7,5 kW weight of the machine ca. 2600 kg dimensions of the machine ca. 2500x1100x2800 mm Accessories / equipment: Crodpfx Aioyv Nd Djxsf - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Cjdpjyahv Sjfx Aixjrf Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools Crodjyilh Iopfx Aixef -we bought this maschine as new for 340 000 EUR in year 2019

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. Credpfsvgnr Ajx Aixsf - Arm spreader. - Hydraulic pump.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Cedjvgnhwspfx Aixsrf - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Condition: new, pressure 20 t stroke 150 mm dayligth 700 mm 500 mm 195 mm Crsdpfx Aisyv Nuvjxof weight of the machine ca. 200 kg Overall size 670x870x1900 mm Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark

Condition: new, pressure 120 t stroke 400 mm dayligth 900 mm 1220 mm 400 mm feed down 5,8 mm/sec feed up 9,5 mm/sec Crsdpfx Aoyv Ntfjixjf Heads 200x125 mm total power requirement 6 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1900x1000x2550 mm

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland Credpfxozdaxye Aixjf

Condition: new, pressing force: 80 t, - Capacity 80 tons - Cylinder stroke 400 mm - Working width 920 mm Codpfev Irwfex Aixerf - Electric or manual operation - Pressure gauge - Emergency stop - 400 V