Used Henning U3E1000 for sale (69)

Condition: used, Year of construction: 1982, pulling force - max. 3 t Nodpfx Ameyif Nxenjwg max. ram stroke 1000 mm max. workpiece diameter 200 mm table-size 500 x 220 mm working area 500 x 220 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 50 mm total power requirement 6 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: like new (used), Kannegiesser and Jensen pump Made of stainless steel Njdpfx Aoy Uik Iomnewg Manufacturer: Hanning, power: 3.45 kW.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical broaching machine with numerous holders Nedjy Nka Tepfx Amnewg

Condition: excellent (used), Broach (28411) 1200 mm long broaching length 30 - 80 mm Nsdsmrmw Sopfx Amnswg 10 mm wide

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Nwedpfxsup Uzfe Amnog Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Technical specifications: - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm - Pulling force: 1.5 t - Working speed: 4 m/min - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 1500 x H 1000 x D 400 mm Njdpfx Ameyfgc Ijnewg - Weight: approx. 200 kg

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Nsdpfx Amsvt Tuienowg Metric US Standard Minimum workpiece Ø 20 Ø Min. Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: good (used), Spindle mount BT 50 Collet chuck holder DIN 6388, diameter 2 - 16 mm Nwsdpfjwz I Tbox Amnjg Gear ratio 1:6 Max. speed 15,000 rpm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm With 14 collets Clamping range 2 - 15 mm Nwjdpfx Amovygxnonsg

Condition: used, Henninger high-speed milling spindle SK 40 Type 801 H580 Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm without collets Njdpfx Aovygziomnswg

Condition: used, enninger high-speed milling spindle SK40 Type 801 M326 Ratio: 1:6 Nsdpevyg A Tefx Amnjwg Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm without collets

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Nwedsf Axn Uepfx Amneg Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Nwodsfxg T Uopfx Amneg Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: excellent (used), Year of construction: 1981, Description to follow! Nedpsynmn Aofx Amnewg

Condition: used, Technical details: turning speeds: 10000 U/min Nodpfx Amsvb A Ubsnswg output: 22 kw weight approx.: 20 kg transmission ratio: 1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case. *

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Henninger, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Dimensions: Ø 116 x 300 mm -Weight: 8.2 kg Nsdpfowuyizex Amnswg

Condition: ready for operation (used), Henninger 767-04-00 swivel motor , Ø housing: 93 mm, Ø drive shaft: 20 mm, used, normal traces of use, 100% functional Nwsdpfx Amji D Ib Sonsg

Condition: ready for operation (used), Henninger 734 16 00 swivel motor, Ø housing: 108 mm, Ø drive shaft: 22 mm, used, normal signs of use, 100% functional Nwedji D Ib Ijpfx Amnjg

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired Nsdpfx Ajy T Iyfjmnewg

Condition: ready for operation (used), Year of construction: 2017, overall weight: 280 kg, load capacity: 4 kg, arm reach: 2,008 mm, number of axes: 6, This 6-axis DAIHEN VARSTROJ FD-B4L 1GM/2DM was manufactured in 2017. It features a maximum reach of 2,008 mm and a maximum handling weight of 4 kg. The robotic welding cell is equipped with an OTC Daihen FD-B4L vertical articulated industrial robot, designed for automated robotic welding applications. If you are looking to get high-quality automated welding capabilities, consider the DAIHEN VARSTROJ FD-B4L 1GM/2DM robotic welding cell. Contact us for further details. • Key robot specs: 4 kg payload (wrist), 2,008 mm reach, ±0.08 mm repeatability • Drive system: AC servo motors • Upper arm max carrying capacity: 20 kg Njdpfx Amjy Tmkpjnowg • Axis ranges: J1 ±170°; J2 -155°/+100°; J3 -170°/+190°; J4 ±155°; J5 -45°/+225°; J6 ±205° • Axis speeds: J1 195°/s; J2 200°/s; J3 200°/s; J4 420°/s; J5 420°/s; J6 600°/s • Allowable wrist moments: J4 10.1 Nm; J5 10.1 Nm; J6 2.94 Nm • Allowable inertia: J4 0.38 kg/m²; J5 0.38 kg/m²; J6 0.03 kg/m² • Installation positions: Floor, wall, ceiling • Operating conditions: 0–45 °C; 20–80% humidity • Robot controller: FD-11 (control capacity up to 54 independent axes) • Teach pendant: WiTP control panel • Facility power supply: 3 x 400 V / 50–60 Hz • Condition: Approx. max. 1,000 working hours; checked by technician approx. 6 months ago • Included documentation: Installation manuals; Operation & Maintenance manuals; CE Certificate; Declaration of Conformity Additional equipment • Welding power source: Welbee Inverter P500L (W) • Welding current DC: 30–500 A • Pulse welding current: 30–400 A • Duty cycle: 60% at 500 A; 100% at 410 A; 80% at 400 A pulse • Electrode diameter: 0.8–1.2 mm • Welding torch: RTW5000H, water-cooled • External axes/positioners: 2x P500 L-VN ROBO positioner/rotator; Multi-Synchromotion function • Safety system: Optical and physical safety barrier system • Cooling unit • Robot interface • CAN interface • Loading pallets

Condition: used, Year of construction: 2004, Overview The empty bottle inspector was built in 2004 by the German manufacturer Miho, designed for quality control in filling lines. The machine was running until January 2025 and is now stored in the company. Technical details Output: 25,000 bph Working direction: Left - right Last used for: 330 ml Longneck glass bottles (green) 330 ml Longneck glass bottles (brown) 330 ml Steinie glass bottles 330 ml Swing top glass bottles 500 ml NRW glass bottles Inspection modules Bottom inspection Sealing surface inspection Side wall inspection Residual liquid and residual caustic detection Nodpfewhv T Ajx Amnowg

Year of construction: 1987, condition: good (used), functionality: fully functional, machine/vehicle number: RMUW2258, Horizontal balancing machine, manufacturer: SCHENK, type: H30, year of manufacture: 1987, serial number: AHE1070, rotor weight: 3-320 kg, rotor diameter: max. 1,260 mm, journal diameter: 10-160 mm, speed infinitely adjustable. Control system: CAB 820, year of manufacture: 2021, serial number: RMUW2258. Nedpfx Asy S Tynsmnewg

Condition: used, Work table packing table workbench height adjustable with stainless steel top and drawer container RA1801 Workbench made of metal, painted white, used worktop with stainless steel surface (traces of wear) height adjustment manually by crank Dimensions: width: 1500mm depth: 800mm height: 820 - 1020mm (adjustable) Drawer container with 4 drawers of different heights Container in 2 different colors (turquoise and blue) Arrangement of containers partly on the left, partly on the right Container dimensions: 400 x 650 x 600 mm (WxHxD) Nwjdpfx Amjk Abdzensg heights of drawers: 1x 50mm, 2x 150mm, 1x 300mm All prices net, plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2019, condition: used, Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands) We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands. This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use. With 1/2 Gastro tooling; 325 x 265 (2x) ----- Key Features - High-capacity automatic traysealer for MAP and vacuum packaging - Equipped with integrated Busch vacuum pump (160 m³/h) - Dual mould system – seal two trays simultaneously for high throughput - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.) - Quick and easy mould change system - Transparent cover for excellent accessibility and cleaning - Flexible operation with programmable tray formats - Designed for continuous industrial production ----- Technical Specifications Nwsdpfx Amey Nagijneg - Machine dimensions: 4750 x 1180 x 1550 mm - Vacuum pump: 160 m³/h Busch - Cycle time: 10–15 seconds - Power supply: 400V / 3-phase / 50 Hz - Power consumption: ±10 kW - Air requirement: 6 bar (max. 400 l/min) - Weight: ±1100 kg - Max tray size: 2 × 350 x 260 mm - Max tray depth: up to 120 mm ----- Why This Machine? The TPS 2000 is built for efficient, high-volume packaging with maximum flexibility. Thanks to its dual mould system, it can double production capacity or run different tray formats simultaneously. ----- Availability - Location: Emmeloord, The Netherlands - Status: In stock – immediately available - Condition: Very neat, directly from production ----- Interested? For pricing, additional photos, or a video of the machine in operation, feel free to contact us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, input voltage: 230 V, type of input current: AC, input frequency: 50 Hz, DGUV certified until: 05/2027, White Electric Spritz Pastry Device Spritz pastry machine, electrically operated Model: ESFG with wall mounting bracket DGUV V3 tested Stepless adjustment Nwedpfxjy H Ur Uj Amnsg Connection 230V, ready to plug in Used machine Option: Quark balls Spritz pastries Ring doughnuts / Donuts