High-frequency-spindle

HENNINGER 805

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and visual condition. The machine has undergone a comprehensive and professional overhaul in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional inspection were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced. In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition. The generator and the control system were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideally suited for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Gjdpfx Aeyrqpfoikebw Working tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 09.11

Condition: used, Year of construction: 2008, functionality: fully functional, 1 OPS INGERSOLL Gantry Eagle 800 wire erosion machine with IMC5 handling system, manufactured in 2008. In very good condition and in operation until December 2025. Now dismantled. Includes 1 M.T.A TAE EVO M10 cooling unit (manufactured in 2012). Gjdsy Ifu Njpfx Aikobw 1 Kraft & Bauer FB703 fire extinguishing system. Weight approx. 6,700 kg. Available for sale at a favorable price. Price significantly reduced!

Condition: used, Year of construction: 1955, groove width 90 mm Godpfoy D A Dyjx Aikjbw drawing length 550 mm table surface area 400x300 mm a lot of tools

Condition: excellent (used), Loading and unloading robots from HALTER; Gjdpfx Aioz Ipmqskjbw Former demonstration unit for turning machines from DN Solutions (formerly DOOSAN); Dual-arm gripper for raw and finished parts; Can be set up very quickly thanks to the software; Parallel tool changing possible during main machining time; AS GOOD AS NEW!!!!!

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Gbedpjzwcfhjfx Aikjw Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. 08/28.

Condition: excellent (used), Year of construction: 2004, Accessories EROWA - SWIAS Year approx. 2004 Approx. 60 pieces Gbjdpfx Aiey Egv Ajkow

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 with SK40-S20x2, suitable for DECKEL milling machine FP1, FP2, FP3, or FP4 Maximum speed: 6000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Overhang: 110 mm (machine spindle to clamping nut) Tool holder: SK 40 - S20x2 Collets: Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Gbedpfxjfxg T Uo Aikow in a wooden storage box The head is equipped with bronze gears for high torque. Weight: 5 kg Total weight: 9.4 kg in good condition

Condition: good (used), Tool holder, milling holder, milling tool, cutter head -Recording: SK40 5 pieces Sizes: see pictures Gbodpofr Iw Sjfx Aiksw Price: complete -Box dimensions: 270/270/H160 mm -Weight: 15.2 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete Gbsdpfx Aiod S Unqsksw -Dimensions: 590/120/H210 mm -Weight: 12 kg

Condition: good (used), Tool holder, tool mount, milling tool Gedpfeu S Tbbsx Aikobw -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Cutting head: Walter type F 2010 Ø80 mm -Disc cutter: Ø100 x 5 mm -Price/Sale: complete -Dimensions: 300/100/H195 mm -Weight: 7.4 kg