Used Gsl Work Platform for sale (53,189)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 516 h, machine/vehicle number: A300057584, load capacity: 200 kg, platform length: 700 mm, platform width: 1,050 mm, overall weight: 4,900 kg, working height: 12,650 mm, TECHNICAL DETAILS Working height: 12.65 m Lateral outreach (standard platform): 6.05 m Up-and-over height: 7.12 m Slew range: 345° Platform capacity: 200 kg Articulated jib length: 4.14 m Jib movement range: 120° (+60° / -60°) Platform size (L × W, standard platform): 0.70 × 1.05 m Platform width: 1.20 m Tail swing: 13 cm Transport height: 1.99 m Transport length (standard platform): 3.65 m Wheelbase: 1.60 m Ground clearance: 10 cm Max. permissible ground pressure: 14.0 kg/cm² Travel speed, stowed: 6.0 km/h Outside turning radius: 2.60 m Inside turning radius: 0.75 m Iodoyzrg Sjpfx An Ujar Gradeability: 30% MACHINE DETAILS Machine weight (standard platform): 4,900 kg Tyre size (non-marking): 457 × 178 mm Operating voltage: 48 V DC Batteries (Deep Cycle): 48 V – 260 Ah Charger: On-board 110 V / 230 V HF Drive motors: 2 AC motors Electric motor (hydraulic pump): 3.5 kW – 48 V DC Hydraulic oil capacity: 15 l EQUIPMENT Steel platform Sliding bar at rear entrance Proportional drive and slew control via joystick with integrated thumb steering switch Mini joysticks for proportional boom, telescope, and jib operation Large platform console with function enable Load sensing system AC power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Automatic idle energy-saving function Low-charge cut-off function On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Lashing and lifting lugs Ground control selector switch with key lock Battery discharge indicator Hour meter Horn Direction orientation system Anchor points for safety harnesses Manual descent system Passive pothole protection system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 67 h, machine/vehicle number: C170003922, load capacity: 230 kg, platform length: 1,340 mm, platform width: 690 mm, overall weight: 2,840 kg, working height: 20,050 mm, TECHNICAL DETAILS Working height: 20.05 m Outreach (standard platform): 9.70 m Platform capacity: 230 kg Up-and-over clearance at 230 kg: 8.20 m Slew range: 360° Articulating jib length: 1.68 m Articulating jib movement range: 89° (+0° / -89°) Basket rotation: 124° (+/-62°) Maximum ground clearance (retracted/extended): 0.79 / 1.09 m Platform size (standard, 2 persons): 0.69 × 1.34 m Platform size (narrow, 1 person): 0.60 × 0.78 m MACHINE DETAILS Transport width (with standard platform): 1.34 m Stowed width (without platform): 0.80 m Stowed height (on tracks): 2.00 m Stowed length (on tracks): 5.00 m Stowed length (on tracks, without basket): 4.40 m Stabilizer footprint: 2.92 × 2.93 m Machine weight (with standard platform): 2,840 kg Climbing ability: 28.7% Maximum permissible working angle: 15° Maximum approach/departure angle (front/rear): 20° / 21° Maximum ground pressure (with outriggers): 3.10 kg/cm² Travel speed (single speed nc/petrol): max. 1.1 km/h EQUIPMENT Aluminum platform Rear sliding entry Foot pedal Fully proportional controls Articulated arm Remote control by cable to platform Fully remote-controlled drive and stabilization functions Multilingual LCD display at platform console Position sensor and console locking Load monitoring system for the work platform Platform with easy removal or exchange Engine protection Rubber tracks Cylinder protection for stabilizers Automatic shut-off when not level Electronic drive management system Electrohydraulic controls Fully proportional hydraulic control Lifting and lashing eyes Forklift pockets Ijdpfx Asyzrfzen Ujar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 286 h, machine/vehicle number: Z4525M-10187, load capacity: 227 kg, platform length: 760 mm, platform width: 1,830 mm, overall weight: 7,400 kg, working height: 15,940 mm, TECHNICAL DETAILS Working height: 15.94 m Platform height: 13.94 m Horizontal reach: 7.65 m Up-and-over clearance: 7.24 m Iaodpfxoyzrcte An Ujr Platform length: 0.76 m Platform width: 1.83 m Stowed height: 2.00 m Stowed length: 6.83 m Width: 1.79 m Wheelbase: 2.03 m Ground clearance (center): 0.24 m Lift capacity: 227 kg Platform rotation: 160° Jib length: 1.52 m Jib vertical rotation: 135° Upper structure rotation: 355° Drive speed (stowed): 4.8 km/h Drive speed (raised/extended): 1.0 km/h Gradeability (stowed): 30 % Tilt sensor activation (longitudinal/lateral axis): 2.5° – 4.5° / 4.5° Turning radius (inside/outside): 1.8 m / 4.27 m Tyres: 0.23 × 0.37 m MACHINE DETAILS Drive type: 48 V DC (8 × 6 V, 350 Ah or 355 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 30.3 l Operating weight: 7,400 kg Tyre contact pressure: 689 kPa Ground load (tyres): 15.08 kPa Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s²

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 852 h, machine/vehicle number: 0300230251, load capacity: 227 kg, platform length: 1,520 mm, platform width: 760 mm, overall weight: 6,532 kg, pivoting range: 360 °, TECHNICAL DETAILS Platform height: 13.72 m Horizontal outreach: 7.24 m Up-and-over clearance: 7.70 m Slewing range: 360° continuous rotation Platform capacity: 227 kg Platform rotation: 180° Vertical jib articulation range: 144° (+86° / -55°) MACHINE DETAILS Machine weight: 6,532 kg Max. ground pressure: 7.6 kg/cm² Driving speed: max. 7.2 km/h Gradeability: 30% Turning radius (inside, 2WS/4WS): 0.61 m Turning radius (outside, 2WS/4WS): 3.15 m Electrical system: 48 V DC Batteries: 8 × 6 V, 375 Ah AC power outlet on platform: 110 V Additional power supply: 12 V Standard tires: 24 × 9 × 12.5 Optional tires: 26 × 7 × 20, non-marking Hydraulic tank capacity: 15.14 l Platform width: 76 cm Platform length: 1.52 m Machine width: 1.75 m Machine height: 2.01 m Machine length: 6.45 m Wheelbase: 2.01 m Ground clearance: 20 cm Isdpfeyzq Uuox An Uear EQUIPMENT Dual electric traction motors Foam-filled, non-marking tires Electric turntable All-wheel drive Automatic traction control Battery charge indicator Brushless AC motors ClearSky Smart Fleet Horn Hour meter LED lighting with amber beacon Lifting and tie-down lugs Load sensing system Platform leveling system Platform status indicator light SkyGuard SkyLine Tilt alarm and warning light

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 252 h, machine/vehicle number: Z34ND-1177, load capacity: 227 kg, overall weight: 5,178 kg, pivoting range: 355 °, working height: 12,520 mm, TECHNICAL DETAILS Working height: 12.52 m Platform height: 10.52 m Horizontal outreach: 6.78 m Up-and-over height: 4.65 m Iajdpfeyzq A Ejx An Usr Dimensions Platform length: 0.76 m Platform width: 1.42 m Stowed height: 2.00 m Stowed length: 5.72 m Transport height: 2.26 m Transport length: 4.19 m Width: 1.47 m Wheelbase: 1.88 m Ground clearance (center): 0.14 m Performance Lift capacity: 227 kg Platform rotation: 180° Jib length: 1.22 m Vertical jib rotation: 139° Turntable rotation: 355° Drive speed (stowed): 6.4 km/h Drive speed (raised, extended): 1.1 km/h Gradeability (stowed): 35% Tilt sensor activation (longitudinal/lateral): 2.5° - 4.5° / 4.5° Turning radius (inside/outside): 2.13 m / 4.08 m Tyres (solid, non-marking): 56 × 18 × 45 cm Drive/Power Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l Noise and Vibration Levels Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s² MACHINE DETAILS Own weight: 5,178 kg Wheel contact pressure: 710 kPa Floor loading (wheels): 14.75 kPa Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 128 h, machine/vehicle number: A300063328, power: 3 kW (4.08 HP), overall weight: 2,600 kg, maximum load weight: 200 kg, pivoting range: 345 °, working height: 10,100 mm, TECHNICAL DETAILS Working height: 10.10 m Lateral outreach (standard platform): 3.38 m Up-and-over height: 6.51 m Slew range: 345° Platform capacity: 200 kg Articulating jib length: 1.60 m Articulating jib movement range: 126° (+69°/-61°) Platform size (L × W): 0.70 × 0.90 m Iajdpjyzq Axofx An Uer Platform width: 0.99 m Max. permissible ground pressure: 19.7 kg/cm² Drive speed, stowed: 5.5 km/h External turning radius: 1.99 m Internal turning radius: 0.55 m Climbing ability: 25% Ground clearance: 0.10 m MACHINE DETAILS Tire size (non-marking): 406 × 125 mm Operating voltage: 24 V DC Batteries (AGM): 24 V – 260 Ah Charger: 24 V – 27 A Drive motors: 2 AC motors Electric motor (pump): 3 kW, 24 V DC Hydraulic oil volume: 7.5 l Dimensions & Weight Transport length: 2.82 m Transport width: 1.20 m Transport height: 1.99 m Machine weight (standard platform): 2,600 kg EQUIPMENT Steel platform Sliding bar at rear access Proportional drive and slew control via joystick with integrated thumb steer switch Mini joysticks for proportional boom and articulated jib lift functions Load monitoring system Mains power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Automatic idle energy-saving function Low-charge automatic cut-off On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Passive pothole protection system Tie-down and lifting eyes Ground controls selector switch with key lock Battery discharge indicator Operating hours counter Horn Drive orientation system Anchor points for safety harnesses Xenon strobe beacon Manual lowering system

Condition: good (used), Year of construction: 2010, operating hours: 170 h, fuel type: electric, Manitou 150 AETJL Bi Energy Articulating Boom Lift / Work Platform 2015, 15.40M Working Height Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Iajdpfx Ajy Dfy Ron Usr Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), functionality: fully functional, Year of construction: 2013, load capacity: 200 kg, lifting height: 12,200 mm, lifting power: 200 kg/m, platform length: 1,100 mm, platform width: 650 mm, overall weight: 2,735 kg, construction height: 1,900 mm, fuel type: electric, tire condition: 100 %, color: blue, === KEY SPECIFICATIONS === Year: 2025 Working hours: 1 h Max. lifting capacity: 3000 kg Max. lifting height: 5.50 m Mast type: Triplex Fork length: 1200 mm Side shift: Yes Drive: Diesel Transmission: Torque converter Cabin: Closed Heated cabin: N/A Tyres: Rough terrain tyres Stabilizers: No Engine manufacturer: Deutz Emission class: Stage V Weight: 6230 kg CE certification: Yes === HIGHLIGHTS === Triplex 5500 mm mast Side shift Brand new machine 55 kW Deutz Stage V engine Rough terrain configuration Ready for immediate use === CONDITION === Iasdjy Dff Hjpfx An Usr Brand new condition Fully inspected and ready for immediate operation === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Brand new rough terrain forklift designed for heavy-duty applications in construction and industrial environments Equipped with a triplex mast and side shift for maximum flexibility and efficiency All machines are fully inspected, CE certified and ready for immediate operation === DELIVERY === Crane loading available on request for smooth transport during shipment Flexible shipping options tailored to your destination and logistics preferences All transport is professionally handled by the logistics team of Collé Rental & Sales

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,000 h, machine/vehicle number: VWASXTF24H7202473/73, Aerial platform on truck. Iasdpfx Ajy At Tisn Uer Nissan NT400 / CTE aerial platform Working height 20 m

Condition: used, mileage: 68,972 km, power: 120 kW (163.15 HP), first registration: 06/2019, fuel type: diesel, overall weight: 4,500 kg, wheelbase: 3,682 mm, color: white, gearing type: mechanical, Equipment: onboard computer, power assisted steering, Special features - ABS, ASR - Radio - Cruise control - Power steering - Driver's seat with armrest - Electric windows - Electronic immobilizer - Central locking with remote control - On-board computer - Parking assist Superstructure France Elevateur 152 TPF Aerial Work Platform - Working height: 14.8 m - Lateral outreach: 8.3 m - Basket capacity up to 265 kg - Slewing angle 400° - Articulating basket arm 140° - 2 x 60° basket rotation - 2 hydraulic outriggers - Plastic work basket (1000 V insulation) - Indicator light for transport position in the driver’s cab - Emergency pump - Operating hours meter - Engine start/stop function - Sine wave power inverter 2500 VA - 230V socket in basket - Single-handed joystick proportional control for hydraulic movements in the work basket - Audible tilt alarm - Flashing beacons The Renault Master is equipped with a professional aerial work platform from the manufacturer France Elevateur, model 152 TPFcc. This platform offers an impressive working height and allows safe and efficient access to elevated areas for maintenance or repair work. All functions of the lift are fully operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV and UVV certification are included free of charge. Additional features such as trailer hitch, lighting, shelving, and more are available upon request. Available immediately at our branch in Langenfeld. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is exclusively with original photos taken in-house – ensuring full transparency regarding the vehicle’s actual condition. Our vehicles undergo thorough reconditioning in our own specialist workshop before sale – including mechanics, bodywork, and painting. They are thus optimally prepared for their next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – also as a remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special features as requested Iajdpoy Dfxmjfx An Usr Looking for something specific? If you can’t currently find a suitable vehicle for your business in our stock, just contact us – we’ll be happy to help. For technical details, more photos, or a personal consultation, please contact us at any time. All prices stated are net prices. The contents of our website are created with the greatest care and updated regularly. Nevertheless, they are for general information purposes only and do not replace individual advice. Only the details contained in the purchase contract are binding. Subject to change, errors, typing mistakes, and prior sale.

Condition: used, mileage: 29,900 km, power: 100 kW (135.96 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special Equipment: Storage compartment on dashboard with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free kit, bodybuilder interface with extension module and CAN data bus, vehicle key with remote control, electric parking brake, steering column (steering wheel) height and reach adjustable, PTO (power take-off) 180 Nm, smoker package, cab seats: single passenger seat, cab seats: comfort driver seat (hydraulic) Additional Equipment: Driver’s airbag, trailer stability program (TSM), trailer socket pre-installation, traction control (ASR), comfort dashboard in blue, model: S-series, exterior mirrors electrically adjustable and heated, brake assist, electronic brake force distribution, driver assistance system: hill start assist (AAS), rear axle suspension: reinforced parabolic, front axle suspension: transverse leaf spring, tinted windshield and side windows, alternator 210 A, speed limiter system: 160 km/h, urea (AdBlue) tank: 20 L, body/chassis: flatbed, fuel tank: 70 L, blue radiator grille, engine: 2.3 L – 100 kW diesel, wheelbase: 3450 mm, low-emission according to Euro 6d standard, service interval display, permissible total weight: 3.50 t Versalift LT-30-110-TB 11.2 meters 2 persons 200 kg Iaodpfx Anoyx Ehke Uer The vehicle is in very good condition! Financing available through Santander Bank.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 04 18750, load capacity: 200 kg, overall weight: 1,400 kg, empty load weight: 1,400 kg, For sale is a reliable Nifty 120 T trailer-mounted boom lift from the year 2008, in good, well-maintained condition. Ideal for working at height such as tree trimming, roof work, façade cleaning, or installations. Technical specifications: - Working height: approx. 12.2 m - Lateral outreach: approx. 6.1 m Iajdpfx Aney Amfxj Ujr - Year of manufacture: 2008 - Power source: Battery + 230V mains (hybrid) - Own weight: approx. 1,400 kg - Platform capacity: approx. 200 kg Condition & Features: - Fully functional and ready for immediate use - Simple controls from both basket and ground - Hydraulic outriggers ensure stable support - Compact design – ideal for confined work sites - Normal signs of use consistent with age Advantages: - Flexible operation thanks to hybrid drive (indoors & outdoors) - No additional generator required - Easy to transport (suitable for cars with appropriate towing capacity) Price: €12,500 gross (Export: €10,504.20 net) Viewing and test run available by appointment. If you have any questions, please feel free to contact us.

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis: * Steel-welded construction with welded longitudinal beams and through Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between longitudinal beams behind the axle assembly under the loading floor. Two insertion pockets for one ramp each, with closure plate on the rear headframe Underride protection: * According to EU regulations Landing legs (front): * Landing legs with single-side operation Support (rear): * Two adjustable drop supports Axles: * 2 x 10 t air suspension axle units, manufacturer SAF, drum brakes approx. 300 x 200 mm, centered wheel mounting for twin tires, ABS, total air suspension stroke approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), control via hand lever with latch function Tyres: * 8x, 235/75R 17.5 – manufacturer of our choice, on steel rims 6.75 x 17.5, mounted with ET Spray protection: * Made of PVC in front of and behind the axles, according to EU regulations Load securing: * Outer frame with one hole every approx. 150 mm for tension straps, lashing force approx. 2.5 t (lashing straps can be fastened with sideboards closed, chamfered outer frame) * 6 pairs of foldable lashing rings, evenly spaced, tensile force approx. 8 t. * Stake pockets for removable stanchions 80/50: 3 pairs in the outer frame, evenly distributed Brake system: * Compressed air brake system in accordance with EU regulations with EBS * Two coils as a connection to the truck with red/yellow coupling heads * Spring-actuated parking brake acting on one axle Isdpfx Ajy Auhbon Ujar Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame Front wall: * Removable from 25 mm high sideboard Lighting system: * Lighting equipment in accordance with EU regulations, 24 volts, multi-chamber rear lights, license plate lights, side marker lamps, and tail marking lights at the rear. Connection panel on the left of the towing bar, including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holders * Plug-in beacon at the rear * Additional 40 mm drawbar coupling (max. gross weight 13,500 kg) * Rear extension by approx. 800 mm incl. underride protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 removable stanchions made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20’ container * 1 x 20’ extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 x 25 mm sideboards and rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), including sideboard storage at the front near the headboard Paintwork: * Chassis shot-blasted, cleaned and premium hot-dip galvanized according to latest technology * Body components cleaned, primed and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 3002 carmine red * Sideboards: RAL 3002 carmine red * Kinnegrip stanc

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) Ijdpjy Auhzofx An Ujar * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 38,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Selection of features. Complete equipment details upon request. EQUIPMENT: * Gooseneck, length approx. 4,100 mm, with central beam * Extendable load area, length approx. 9,400 mm, with 350 mm x 10° rear bevel and integrated hook-in rail for use with separate aluminum loading ramps * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the selected platform length * Technical fifth wheel load: 18,000 kg * Suitable for tractor units: 4 x 2 and 6 x 2 * TPMS Tire Pressure Monitoring System in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lift/lower valve * 235/75 R 17.5 3PMSF twin tires, manufacturer of our choice * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (without supply connections installation on the tractor unit) * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - The first three pairs are flat (LC 10,000 daN) - The rear pair is fold-out (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank; JOST Modul B, static test load approx. 50,000 kg * Wooden flooring approx. 32 mm thick, framed in aluminum omega profiles on the gooseneck and platform * 10 pairs of recessed, flat-mounted, foldable lashing rings in the outer frame of the load area * One pair of lashing rings (LC 10,000 daN) in front of the last axle and at the end crossmember of the trailer * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the load area for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the load area, right side when facing forward * 1 lockable stainless steel (INOX) toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left when facing forward * Rear crossmember with bevel approx. 350 mm x 10° * Integrated hook-in rail for loose aluminum loading ramps at the rear crossmember * 1 pair of drop-down supports at the rear crossmember Iedjy Augdopfx An Usar * Steering override from front and rear via cable remote control with single-track axle monitoring (no installation on tractor unit) * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 1 LED work light on both left and right of front bulkhead, wired to the tractor unit’s connection rail * Locking positions at each 500 mm on the extension * Internal holder for stakes not in use, mounted to the inside of the gooseneck bulkhead * 4 wheel chocks with holder under the load bed * Galvanised extension sections for platform widening by approx. 230 mm per side (without wooden planks) * 1 LED work light on both left and right in front of the axles, wired to the connection rail for the tractor unit * 2 axle load gauges mounted on the left side, including axle load diagram * 1st axle with traction aid * Mountings for warning signs under the gooseneck as well as left and right at the rear crossmember * Acoustic warning signal when reversing * EU reflector at the rear of the vehicle

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, total width: 2,480 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Below is an excerpt from the equipment. Full specification available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity * Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame Underrun protection: * In accordance with EU regulations Landing legs: * Front: landing legs with single-sided operation * Rear support: two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function Tyres: * 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind the axles as per EU regulations Load securing: * On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils as coupling to the truck, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z hardwood floor recessed into the outer frame Lighting system: * Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable flashing beacon at the rear * 40 mm towing device supplied (GVW max. 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard * Body components cleaned, primed, and hot-dip galvanized Iasdpfx Aoy Auf Ton Ujr * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Fittings: galvanized / KTL black

Condition: new, Year of construction: 2026, total length: 10,030 mm, Telescopic work platforms Magni DTB24RT Drive Diesel Year built 2026 Work height (mm) 24,800 Iedpfx Aey A Tngon Ujar

Condition: used, machine/vehicle number: 8308, mileage: 191,919 km, power: 158 kW (214.82 HP), first registration: 04/2018, fuel type: diesel, overall weight: 11,990 kg, tire size: 245/70R17.5, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: air conditioning, airbag, central locking, differential lock, electric window regulation, onboard computer, power assisted steering, Special features - Electric windows - Radio - ABS / ASR - Rearview camera - Differential lock - Air conditioning - Power steering - Central locking - Fog lights - Air-suspended driver’s seat Superstructure France Elevateur 192 CPM Aerial Working Platform Iedpfx Aney Av N Te Usar - Working height: 19 m - Lateral outreach without outriggers: 7.5 m - Lateral outreach with outriggers: 11.8 m - Basket load: 265 kg / 2 persons With 220V power socket With compressed air connection 2 water connections: one with 24V electric pump, 2.7 bar; the other a high-pressure connection with petrol-powered pump, 200 bar. - Tower rotation: 400° - 4 hydraulic outriggers and 2 hydraulic rear axle stabilizers - Maximum operating inclination (slope): 5% - Maximum lateral inclination: 15% - Fully insulated fiberglass basket (1000 V) - Steel boom with 2 telescopic sections - Articulated pendulum arm 180° - Emergency operation (remote control) in the cabin - Inclination alarm (tilt sensor) - Basket rotation: 2 x 90° - Operating hours counter - Emergency pump Body features - Tool shelves - Stainless steel water tank 200l - Sine wave inverter 2500VA - Quick coupling for compressed air - Vice - 220V socket Renault D12 with France Elevateur 192 CPM aerial platform, mounted on a 12-ton truck, suitable among others for the facade cleaning industry. The basket is equipped with a high-pressure water pump, petrol-engine driven, 200 bar, as well as a second water connection with 24V electric pump, 2.7 bar. There is also a compressed air connection in the basket. All functions of the aerial platform are fully operational and have been checked by our workshop. The vehicle is ready for registration. German paperwork, TÜV, and UVV certificates are included free of charge. Additional features such as trailer hitch, lighting, shelving, and more are available upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles we offer are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos, taken directly at our premises – ensuring full transparency regarding the actual condition of the vehicle. Prior to sale, our vehicles receive comprehensive preparation in our in-house specialist workshop – including mechanical, body, and paint work. This ensures they are optimally prepared for the next technical inspection. We also guarantee the authenticity of indicated mileage. Trust is good – inspection is better: On request, the vehicle can be inspected by independent organizations such as TÜV, DEKRA, or KÜS – also available as remote inspection. Our range of services for you: - Delivery of your vehicle to your chosen location - Complete processing of export formalities, incl. export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as required Looking for something specific? If you currently cannot find a suitable vehicle for your business in our inventory, please contact us – we are happy to assist you.

Condition: used, mileage: 84,553 km, power: 90 kW (122.37 HP), first registration: 07/2013, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,740 mm, total width: 2,220 mm, total height: 2,915 mm, Equipment: ABS, crane, soot filter, Renault 120 DXI Palfinger Steiger P260B 4x2 Self-propelled work platform Suspension: leaf spring Wheelbase: 3.90 m PALFINGER Type: P260B Year: 2013 4x hydraulic extension 4x hydraulic outriggers 2x work baskets + emergency controls Equipment: Isdpfx Aoy Aqf Njn Usar - 3 seats - Radio-CD-DVD-AV-USB - Electric windows We are happy to assist you with financing/leasing through our partners. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, maximum load weight: 2,150 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 02/2022, total width: 2,150 mm, total height: 890 mm, Temared trailer Winch 3 axles First registration / Year of manufacture: 17.02.2022 / Vehicle type: Semi-trailer Body type: Platform Isdpfxsy Dyz Ae An Ujar KBA No. (HSN/ TSN): 1897//000 Paint color: Silver Number of previous owners: 1---- The vehicle is unprepared! Nationwide delivery available for an additional charge. Errors and prior sale reserved. We are happy to take your vehicle in part exchange. Financing / leasing also available with no down payment! Do you have questions? We are happy to advise you!

Condition: used, first registration: 03/2002, next inspection (TÜV): 03/2027, Equipment: ABS, Export only Sale only abroad SPR 324 Kotschenreuther 3 axles Iaedoy Dmq Djpfx An Ujr

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 370 h, power: 4 kW (5.44 HP), axle configuration: 4x2, load capacity: 200 kg, lifting power: 200 kg/m, platform length: 760 mm, platform width: 1,170 mm, overall weight: 3,669 kg, construction height: 1,980 mm, fuel type: electric, tire size: 56 x 23 x 43 cm (non-marking), tire condition: 90 %, wheelbase: 1,900 mm, color: blue, === KEY SPECIFICATIONS === Year: 2019 Operating hours: 370 h Working height: 12.0 m Max. horizontal reach: 5.57 m Platform capacity: 200 kg Platform dimensions (L x W): 0.76 x 1.17 m Turntable rotation: 400° Boom type: Articulated Jib: No Drive: Electric Iodpfx Ansyznhxs Uoar Four-wheel drive: No Tires: Solid non-marking Stabilizers: No Motor manufacturer: Genie / AC electric drive Emission class: Electric (zero emission) Weight: 3,669 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE-certified and fully documented Ready for immediate transport and operation Very low operating hours (only 370 h) Compact design – ideal for indoor and narrow spaces === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Normal signs of use visible (minor cosmetic wear on rims). Inspection available on request. === LOCATION & PRICE === Located in Sittard, Netherlands. Worldwide delivery available. Price €24,375 (EXW / excl. VAT). Reliable articulated boom lift from first owner with low operating hours and full service history. This Genie Z-33/18 is ideal for indoor maintenance, installation, and warehouse applications thanks to its compact design and zero-emission electric drive. All machines are fully inspected, CE-certified and ready for immediate use. Spare parts and professional support available on request. === DELIVERY === Crane loading available on request for smooth transport. Flexible shipping options tailored to your destination. All transport professionally handled by Collé Rental & Sales logistics team.

Condition: used, maximum load weight: 600 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 04/2025, loading space length: 2,500 mm, loading space width: 1,260 mm, loading space height: 300 mm, total width: 1,710 mm, total height: 790 mm, The box trailer consists of a sturdy aluminium construction with a wear-resistant wooden floor. Errors and prior sale excepted. Iasdsy A A Snjpfx An Ujr

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: Iedpfx Anjyz E T Ss Usar * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, Year of construction: 2026, total length: 12,370 mm, Telescopic work platforms Genie S-85 XC Drive Diesel Year built 2026 Work height (mm) 27,910 Ijdpsy Abirjfx An Ujar