Used Flame Lamination for sale (1,103)

Year of construction: 1985, operating hours: 25,000 h, condition: used, functionality: fully functional, machine/vehicle number: -, Fully operational flame lamination machine, in daily use on one or two shifts until December 2019, and regularly upgraded for electrical, mechanical, and methane gas systems. This is an Italian construction machine from the early 1980s. The machine dimensions are 4 meters by 11 meters. It can handle rolls up to 1.80 meters in height. Lamination thickness ranges from 2 mm to 35 mm. Both cylinder speeds, burner position, and flame intensity are adjustable. We typically laminate EPE or PU foams together or with fabrics, synthetic leather, or cotton fabric. Lsdpfx Aowyxpkel Ishh

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Lhjdpszb Ip Isfx Al Ioh Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Lhsdpfx Aloydnxnj Ijh Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: good (used), Year of construction: 2009, Ref: 11073 . 2009 AL-MEISTER PLS3310 Pluster Laminator 350mmx500mm single sided laminator for a wide variety of stock. Features: Very user friendly Cost saving, optimized efficiency Paper feeding, laminating and separating all in one go. Pluster ‘s unique feature is that the film setting information is stored for future reproduction. Fujipla's accumulated laminating technology provides excellent quality. Lhjdpfxjymz N Ss Al Ish Offset & digital printing on demand can be perfectly laminated with Fujipla's special SAP film. The most compact machine on the market with the lowest noise level. Can be used anywhere, from factories to office spaces or small areas. Specification: Processing Speed: 1.0-5.0m/min. (*1) Warm-up Time: Approx. 15-30min. (*2) Temperature Range: Ambience, 60-130°C Feeder Max. Load: 100mm Paper Thickness: 115-300g/m2 Max. Paper Size: 350mm(W) × 500mm(L) Min. Paper Size: 318mm(W) X 450mm(L) Power Consumption: 1.0kw / 6A Power Source: AC220-240V Net Weight: 151.6kg

Condition: used, Year of construction: 2008, FICEP Tipo B 251 sheet metal processing center Year of construction 2008 - sheet metal processing center - Plate size max. 6000x2500mm - 1 drilling unit - 6-fold changer incl. marking tool - 1 punching unit (currently without function) - 12-fold tool changer for punching tools - Conveyor belt for finished parts - Hypertherm HPR 260 plasma source - Donaldson Torit DCE extraction system - Machine weight according to manufacturer approx. 23 tons Lhedpfxoy E N Dpj Al Ijh Main Technical Specifications Plate specifications on infeed side: • Length max. mm 6000 min. mm 2500 • Width max. mm 2540 min. mm 500 Work piece specifications on outfeed side: • Length min. mm 200 • Width min. mm 150 Punching Capacities (on 400N/mm² plates) • Punching force kN 1000 • Maximum stripping force kN 100 • Maximum hole diameter in punching mm 100 • Max. diameter on 20 mm thickness mm 38 Other Specifications : • Thickness of the large plate min. mm 6 • Thickness of the large plate (punching operations) max. mm 25 • Thickness of the large plate (thermal cutting) max. mm 32 • Thickness of the large plate (drilling operations - with optional device) max. mm 100 • Positioning weight max. kg 5000 • Linear weight of the large plate max. kg/m 750 • Max. vectorial traverse speed max. m/min. 30 • Cross positioning speed m/min. 40 • Working level’s height mm 1100

Condition: like new (used), Year of construction: 2020, All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo. The Easymount EM-1200DH is a wide-format, double hot roller laminator designed for both laminating and mounting applications. It supports hot and cold lamination, enabling you to laminate prints and graphics, mount prints to boards, and apply vinyls, tapes, and adhesives. Key features include: Ljdpoych Utjfx Al Ijhh * Maximum lamination width of 1200 mm (47 inches) * Lamination speed of up to 3.9 meters per minute * Capability to handle mounting thicknesses up to 25 mm (1 inch) * Variable speed settings for precise control * Reverse mechanism to correct any lamination errors or jams * Heat-assisted rollers for consistent and high-quality lamination results. This machine is suitable for mounting wide images using sheet film as well as continuous mounting with roll film, making it versatile for various print finishing needs. It is designed to be durable and reliable for professional use in wide-format finishing environments.

Condition: good (used), Oxy-fuel cutting device, with rotary table ideal for cutting weld seams Lhjdpfx Alod Dti Ie Ijh Rotary table diameter 285 mm Maximum cutting diameter 600 mm Overall height 1150 mm Width 900 mm Depth 500 mm

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, auto sheet separation drop sheet delivery. It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. Lhjdpfx Aler Ddu Is Ieh We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Max sheet size 510 x 640mm Min sheet size 200 x 300mm, Max speed 10m/min Film unwind shaft 75mm dia Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel torches 23626 Lhodow El Udspfx Al Ieh

Condition: good (used), Year of construction: 2011, CNC Portal Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Construction: 2011 CNC Control: iMSNC with integrated network card Working Area: 2,000 x 9,000 mm Extraction Table 1 Oxy-fuel Torch Cutting Thickness up to 150 mm 1 Plasma Marking Unit Kjellberg Laser Pointer Technical Data in Detail: 1x Oxy-fuel Torch (1 x fully automatic) 1x Plasma Marking Unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC Machine Control iMSNC with integrated network card LCD Operator Panels on the Portal Laser Pointer with automatic offset transfer Parameter Database iMSNC Control / Windows® Programming System "AsperWin-Basic" for programming directly on the machine control Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for peening) via plasma source Module "THC" / Automatic Height Control via arc voltage USB 2.0 connection for data storage devices Module Remote Diagnostics MicroStep® "iFDS Win" Remote Maintenance Access via TeamViewer Central Gas Control via Proportional Valves Parameter Database for 1 Torch Power Cables Gas Hoses for Preheat Oxygen, Cutting Oxygen Acetylene Machine Cutting Torch RHÖNA-Acetylene FIT+ 1 Piece Capacitive Height Control IHT / for Oxy-fuel Lhjdpfxjudn Rzo Al Ish 1 Piece Electric Ignition Unit RHÖNA-Acetylene Double-sided cable protection (collision protection) of the portal bridge via emergency stop Kjellberg® Plasma Marking Unit FineMarker Fully automatic support for FineMarker Kjellberg® Plasma Marking System FineMarker CNC Interface for FineMarker / Connection to the CNC control Module for the automatic control of the marking device 23626

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Lhsdpfx Alsgqkc Nj Ieh Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center Lhsdpfsdz Spwox Al Ijh - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: ready for operation (used), functionality: fully functional, We offer this ready-to-use IML Machinery DA-900 IML DA 900 box laminating machine. Manufacturer: IML Machinery Model: DA-900 Condition: ready for use Category ID: 174 Type ID: 82 Machine type: IML DA 900, box laminating machine DESCRIPTION Lsdpfx Aljzfv Tzs Ishh Thanks to its ease of operation and quick changeover capability, this electro-pneumatic machine is suitable for small and medium production volumes of high-quality boxes. The operator places the box onto the pre-glued facing paper and then manually feeds it into the machine. Once the box is positioned, the processing sequence is started via the machine's foot pedal. The machine then operates independently, lining the box, including the inner flap. At the end of the cycle, the box is automatically ejected. TECHNICAL DATA Production: approx. 7 pieces/minute Voltage: 220 volts, single-phase Total power: 2.5 kW Compressed air connection: Rilsan hose Ø 12 mm Air consumption: 20 NL/minute at 6 bar DA 900 Box dimensions (L × W × H): min. 60 × 60 × 10 mm; max. 430 × 350 × 120 mm Machine dimensions (W × D × H): 1200 × 1400 × 2300 mm Weight: 1000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Used machine In all operating processes, materials are fed from the front side through the roller gap and bonded together by pressure. Standard number of axes: Material unwinding: 2 Silicone paper unwinding: 1 Roller gap adjustment: 0 - 52 mm Pressure: 0.3 - 0.8 N/mm Processing speed: Maximum: 5 m/min Slow operation: 0.6 m/min Reverse operation: 0.6 m/min Noise level: > 70 dB(A) Material data: Max. width: 1400 mm Max. material diameter: Material unwinding: 200 mm Lodpfx Aey Nugkel Iohh Silicone paper rewinding: 150 mm Max. sheet thickness: 50 mm Core inner diameter: 76.2 mm Power supply: 230 V Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1995, CNC gantry flame-cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm Lhsdpfx Aleyay Dho Ish 8 x oxy-fuel torches, type ALFA 8 x Omnilift 200 Without track Without table Without filter 23626

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, working width: 520 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 500 kg, KOMFI AMIGA 52 Commercial Print Laminator. Production Speed: 25 meters per minute. Maximum sheet size B2. Digital Metallic Foiling attachment fitted. Lhodpox Ry H Eefx Al Ioh Deep plie suction feeder with Becker pump. Auto sheet separation and delivery into the reception tray. Power supply: 400v 50Hz 3 Phase

Condition: used, This listing is for a second-hand ‘ModulMounter ApS’ flatbed laminator Item for sale: 1 x ModulMounter ApS with the following features: Includes lighting Folds away for space-saving storage Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: Lhsdpfxezap Uvo Al Ioh You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, GMP QTOPIC-380 F Hot laminator for single-sided lamination, year of manufacture 2022 Working width 380 mm. Chrome roller 100 mm Ø. Thermal lamination up to 10 m/min. Single-sided lamination with de-curling device for perfectly flat sheets. Automatic sheet overlap for consistent results, independent of the operator. Working width 380 mm Films 25 - 44 microns, 58/77 core Paper thickness 120 g/m² ~ 350 g/m² Speed up to 10 m/min Heating time 5 minutes Pressure roller pneumatic Connection values 230 V, 2.8 kW Dimensions H x W x D in mm 1350 x 1700 x 720 Ljdpfx Alsza Hdzs Ijhh Separation also possible for nylon films, pneumatic roller pressure with automatic stop at the end of the stack, including compressor. Sleeking (printing enhancement). Use of embossing rollers possible.

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Lhodpowi T Tvsfx Al Ieh Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: good (used), Primultini band saw Roller diameter: 1300 mm Lsdod Sclhjpfx Al Iehh Roller width: 140 mm with Planomatic system

Condition: excellent (used), Raimann B4 band saw Lsdpfjdyccdox Al Iehh

Condition: like new (used), Year of construction: 2017, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year built: 2017 With this line, the input and output is the following length: Input: 6M Output: 3M Ledpfxeu Dxbte Al Iehh If you want more pictures or information please contact us.

Condition: like new (used), Year of construction: 2015, Ficep TIPO B254 Automatic CNC punching & thermal cutting systems for heavy plates Technical specifications Plate size [max. mm]: 2540x6000 Punching nominal force [kN]: 1000 Punching tool [no.]: 8 Punching diameter [max. mm]: 32 Lhedpjxn T H Dofx Al Ioh Punching thickness [max. mm]: 25 Drilling heads [no.]: 1 Drilling tools per head [no.]: 8 Drilling diameter [max. mm]: 40 Drilling thickness [max. mm]: 100 Spindle power [kW]: 20.1 Spindle speed [max. RPM]: 4000 Plasma torches [max. no.]: 2 Oxy-fuel torches [max. no.]: 1 Machine weight [kg]: 24000

Year of construction: 2007, condition: excellent (used), machine/vehicle number: T805L30030, Max. Laminating Width : 800 mm Lsdpfxjh Nxy Us Al Iehh

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Lhodpfx Aoipvhnjl Ish