Used Es 330/80 Hls for sale (25,325)

Condition: ready for operation (used), Year of construction: 1998, Engel ES 330/80 HL .ST Closing 80 tons Year 1998 Nwjdpfx Aevcrqnebkoh Scrow 35 mm Spray softened 140 g

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm Nedpfxjpdr Aie Abkewh

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg Nwodpoxcw T Rjfx Abkeh - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: excellent (used), Year of construction: 1997, Engel ES 330/90 HL Year of manufacture: 1997 Nsdpfxjxt S Tyo Abkewh Screw diameter: 35 mm

Condition: excellent (used), Year of construction: 1999, Engel ES 80/20 HL Nwedpfolq Hyqsx Abkjh Clamping force: 20 tons Year of manufacture: 1999 Screw diameter: 22 mm Displacement: 38 cm³ Enlarged clamping plate 550 x 430

Condition: excellent (used), Year of construction: 2000, Engel ES 330H80V/125HL .2F Year of manufacture: 2000 Closing force: 125 tons Multi-component injection molding machine Control system: CC100 Nwedeigrinspfx Abkjh Cylinder H: 35 Cylinder V: 18 1x Hydraulic core pull unit, BAP 1x Proportional hydraulic indexing plate connection, BAP 16x Hot runner zones 2x Magnetic clamping plates for BAP and FAP

Condition: good (used), Year of construction: 1996, Engel ES 330H200V/125 HL – 2F Clamping force: 125 tons Tie bar diameter: 35 mm Tie bar diameter: 30 mm Injection volume: 158 cm³ 98 cm³ Year of manufacture: 1996 Enlarged clamping plate: 740 x 700 Minimum tool installation height: 350 mm Plus rotary platen Nwodpfx Aslu Hkijbkeh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Control: CC100 Nwodoy Exc Iepfx Abkeh EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Nwodpsukn S Hofx Abkoh Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Nwsdpfx Abozcaxdskeh Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic

Condition: good (used), volume flow: 85 m³/h, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, Grundfos TPD pumps are single-stage, tightly connected in-line centrifugal two-head pumps, with mechanical shaft seal and primarily for applications such as heating / cooling / district power. Type: TPD 80-330 / 2 A-F-A-BAQE Technical pump speed: 2930 rpm Nominal flow: 85.6 m³ / h Nominal lifting height: 25.9 m Maximum lifting height: 33 m Actual impeller diameter: 157 mm Materials Pump housing: Cast iron Impeller: Cast iron Material code: A Installation Ambient temperature range: -30 .. 60 ° C Maximum operating pressure: 16 bar Max. Pressure at the specified temperature: 16 bar / 140 ° C Connection size: DN 80 Pressure value for connection: PN 16 Port-to-port length: 440 mm Flange size for motor: FF300 Pump Transported liquid temperature range: 0 .. 120 ° C Density: 998.2 kg / m³ Electrical data Engine: Rated power - P2: 11 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-415D / 660-690Y V Rated current: 12.0-11.8 A Starting current: 660-780% Rated speed: 2930 rpm Number of poles: 2 Housing classification (IEC 34-5): 55 Powder / Spray Insulation class (IEC 85): F Motor protection PTC Net weight: 303 kg Nedpog I Utpsfx Abkewh Gross weight: 328 kg Purchase and purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Year of construction: 2000, Connection value: 430kW Nwjdpfxjip T T He Abkoh Dimension: Total length: 10750mm Width: 3400mm Height: 3900mm

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Njdpevxh Iujfx Abkswh Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Njdpfx Abshz Ua Sekowh

Condition: repair required (used), Year of construction: 1999, The machine is currently not operational, the control cabinet is incomplete! Nwodsyrdzujpfx Abksh

Condition: excellent (used), Year of construction: 2000, Engel ES 500/125 HL Clamping Force 125 tons Year of manufacture: 2000 Screw diameter: 45 mm Injection volume: 318 cm³ Nwodpfeh R T Slox Abksh

Condition: excellent (used), Year of construction: 1999, Angel ES 650/175 HL-V Closing 175 tons Year 1999 Scrow 45mm Stroke volume 318 cm3 Nsdpfx Abepdrzhskewh Enlarged clamping plate 820x750 Mould height min 250 mm

Condition: excellent (used), Year of construction: 1999, Engel ES 1050/175 HL-V, clamping force 175 tons, year 1999, screw diameter 55 mm, injection volume 510 cm³, shot weight 459 g, enlarged clamping platen 820x750, CC100 control system. Nwjdpfoxu Rkysx Abksh

Condition: excellent (used), Year of construction: 2001, Engel ES 500/110 HL Clamping force: 110 tonnes Year of manufacture: 2001 Screw diameter: 45 mm Injection volume: 318 cm³ Enlarged clamping platen Nwedpfjxu Rldox Abkeh Platen dimensions: 730x600 mm

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Closing 60 TO Year 1999 Nodpfsvlangex Abkjwh Scrow 30 mm Enlarged clamping plate 660x560

Condition: excellent (used), Year of construction: 1999, Engel ES 650/150 HL Nwedpfxexy Ak Nj Abkjh Clamping force: 150 tons Year of manufacture: 1999 Screw diameter: 45 mm

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/80 Phoenix Clamping force: 80 tons Year of manufacture: 2004 Screw diameter: 40 mm Nwjdpfx Aboxq Ti Rokjh

Condition: ready for operation (used), Year of construction: 1986, Engel ES 80/35 ST Closing 35 tons Year 1986 Scrow 22mm Nwjdpetwmv Sefx Abkoh EC 88

Condition: excellent (used), Year of construction: 2002, Engel ES 750/300 HL Nwedpfxsxvm Scj Abkeh Year of manufacture: 2002 Screw diameter: 55 mm Clamping force: 300 tons

Condition: ready for operation (used), Year of construction: 2001, Engel ES 200/75 HL Closing 75 tons Year 2001 Scrow 35 mm Nodpfevzhmiex Abkewh