Used Erbend Mfg 3210 for sale (155)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 41000 € 783.1 € 3200 mm 1 mm 0.6 mm 15 mm Motorisch 155 ° 110 mm 4500 mm 2100 mm 1650 mm 2900 kg 750 mm 300 mm/s 0.1 +/- mm 20 mm 100 °/sek 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters upper tool in one pice, 20° manual height adjustment of bending beam foot pedal with 3 switches ligtht barrier on the front side Itjdpfx Ajwirccjchok OPTIONS: Grafic control 2D € 5.150,- -15,6" touchscreen controller on swivel arm - LBL editor: adjustment of bending steps line in line by entering the axes values - 2D part editor: programming by drawing in graphic mode and 2D visualisation - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - autorisiation with password - 128GB HDD allows almost unlimited data storage - detailled alarm, tool and paramter page back gauge 1000 mm € 4.120,-

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration Itedpfxex Ndu Do Achok

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 71500 € 1351.35 € 4200 mm 1.5 mm 1 mm 2 mm Motorisch 5450 mm 2200 mm 1900 mm 5350 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control Itodewirrqopfx Achok PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 59900 € 1132.11 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length Ijdpfswiq E Nex Achotk - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 61800 € 1168.02 € 2550 mm 2.5 mm 1.5 mm 3.5 mm Motorisch 3830 mm 2200 mm 1900 mm 4050 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Ijdpfxewiq A Uj Achetk Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 63600 € 1202.04 € 3200 mm 2 mm 1.2 mm 3 mm Motorisch 4450 mm 2200 mm 1900 mm 4500 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Ijdpfx Aewiq A Ijchetk Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, Year of construction: 2025, neu 2025 080093 prompt, Zwischenverkauf v Türkei 6130 € 118.31 € 1 1050 mm 1.5 mm 1 mm 2.2 mm 150 ° 500 mm 200 mm 1300 mm 750 mm 1515 mm 280 kg Verstellbereich 35 mm Itsdpfx Aewiqwrechek Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English

Condition: as good as new (ex-display), Year of construction: 2023, sheet width 1050 mm plate thickness 1.50 mm daylight opening 100 mm bending angle max. 135 ° height OW 100 mm total power requirement manuell weight of the machine ca. 330 kg. dimensions of the machine ca. 1600 x 900 x 1450 mm Exhibition machine from 2023 only 2x machines in stock special price on request Features: - robust, manual folding machine - split upper, lower and rear tool * Height of upper tool = 100 mm * Pitch 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * Left right with horn tool - Upper tool with quick-change system - Quick foot clamping - Angle fence - lockable - Manual back gauge 500 mm - Machine can be moved (rollers) Ijdsxaa T Uepfx Achjtk - Accessory box - rear * Pictures show identical machine (UFA 1212)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 10 h, control type: CNC control, We are offering a near-new ERBEND D-SFA 4230 CNC folding machine on behalf of one of our customers. This machine has less than 10 operating hours and is in absolute mint condition. A unique opportunity to acquire a high-end CNC folding machine without long lead times. Technical Specifications: This servo-driven folding machine is built for precision, speed, and flexibility: Working length: 4200 mm Capacity steel (S235): 3 mm Capacity stainless steel: 2 mm Capacity aluminium: 4 mm Machine dimensions: 2200 x 6100 x 2300 mm Machine weight: 11,800 kg Positioning accuracy: ± 0.1 mm Thanks to the servo drives and ball screw system, the machine guarantees high precision and reliability. Itodey Idp Eopfx Achsk Configuration & Equipment This machine is fully equipped and ready for immediate production: CNC control (Erfold 3D) with full 2D/3D programming and simulation Double bending system (upward and downward bending for higher productivity) U-type back gauge (4200 mm) with pneumatic fingers Integrated suction cups for stable sheet positioning Complete segmented tooling set (top & bottom) 200 mm high upper tooling with pneumatic clamping Motorized CNC axis adjustments (A-B-D axes) Manual crowning system for optimal bending results Foot pedal with 3 functions + safety light guards Additionally equipped with motorized clamping beam and folding beam, ensuring fast and accurate processing Condition Less than 10 operating hours Fully operational and available for inspection under power No wear – in like-new condition Available immediately Applications / Industries This folding machine is ideal for: Sheet metal fabrication companies Roofing and façade cladding HVAC production Machinery and construction industry Interior and custom metalwork Both single-piece production and serial manufacturing The double bending capability combined with 3D CNC control makes it highly suitable for complex parts as well as efficient batch production. Why this machine? Like-new condition at a significant cost advantage No delivery time Fully equipped and production-ready Large working length (4200 mm) Proven ERBEND quality Interested or want to schedule a viewing? Contact us for more information or to see the machine in operation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 20021, working width: 2,100 mm, bending angle (max.): 150 °, sheet thickness (max.): 3 mm, distance between stands: 2,450 mm, opening stroke: 160 mm, TECHNICAL DETAILS Sheet width: 2,100 mm Sheet thickness: 3.0 mm Itedpoygw Haofx Achok Frame width: 2,450 mm Opening width: 160 mm Max bending angle: 150° Backgauge - adjustable: 6.0 - 1,000 mm Control: CNC MACHINE DETAILS Total power requirement: 5.37 kW Dimensions: 3,250 x 2,450 x 2,100 mm Machine weight: approx. 3,850 kg EQUIPMENT - ERBEND 15.6" CNC control panel - Electric backgauge from 6.0 - 1,000 mm - Material support table with ball rollers - Servo motor drive - LED machine lighting - 1x 30 upper tool - radius 1.0 mm - 1x bending rail 15 mm - 1x bending rail 25 mm - Electric safety device at the front (light curtains) - Mobile foot control - Operating manual - CE declaration SPECIAL ACCESSORIES - Divided Geifu upper tool, height = 90 mm - CNC electric motorized adjustment of lower beam - Manual crowning of the bending beam

Condition: new, Year of construction: 2026, neu 2026 080200 Itodpowirc Aefx Achek prompt, Zwischenverkauf v Türkei 6550 € 126.42 € 1 1250 mm 1.25 mm 0.8 mm 2 mm 150 ° 500 mm 200 mm 1500 mm 750 mm 1715 mm 315 kg geteilt, 45° Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 29200 € Isdpfewiq Ikex Achetk 557.72 € 3200 mm 2 mm 1.2 mm 3650 mm 1700 mm 1300 mm 3100 kg NC-controlled backgauge 750 mm ELGO P40T touchscreen Rear light barrier protection Front finger guard cover Extendable front support bracket Cutting line illumination Equipment compliant with CE directives Operating instructions in German or English OPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Ijdsy Uuw Tepfx Achetk Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Ijdpfxjy Uquhj Achotk Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press Iodpfx Acsy Uiyvohotk This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Itedpfxoy Ugtao Achjk Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Itodpfx Aoy Uc Nkechok Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: new, Alfa Laval M6-MFG plate heat exchanger, 30107-39733, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Itedozt H Edspfx Achjk

Condition: new, Alfa Laval M6-MFG plate heat exchanger, 30107-39734, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate pricing for packaging and shipping! Itjdpszpcv Djfx Achek

Condition: used, Size max 360x310 mm min 100x85 mm Number of stitches Standard 2-10 Staggered 2-5 Continuous 2-9 Stitching length 15.7mm Speed max 9000 c/h min 900 c/h Power requirements 1.8 kW (220/380V, 50Hz) Length 4744mm Width 1035mm Weight 3135 kg (approx.) Equipment • 1 set of tools • 1 set of electrical diagrams • 1 set of operator manuals • 1 spare part catalogue Iodpfowkufiex Achstk • standard equipment

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Speed: 12.65m/min -Drive: 0.18 kW -2x belt widths: 275 mm -driven via: an axle -Length: 3210mm Itjdpfx Asd R N H Uechek -Number: 1 piece available -Transport dimension: 3210/1020/H720 mm -Weight: 124kg

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,600 kg, fuel type: electric, construction height: 1,156 mm, fork length: 1,150 mm, empty load weight: 450 kg, total length: 1,650 mm, drive type: Elektro, construction width: 720 mm, Low-lift pallet truck Fork width: 170 mm Fork thickness: 74 mm Condition: New Technical condition: New Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Itjdpfx Acszrizrohok Battery capacity: 150Ah Battery type: PzS Battery year of manufacture: 2026 Battery condition: New

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 34 h, load capacity: 1,600 kg, fuel type: electric, drive type: Elektro, Low-lift pallet truck Load centre: 600 Condition: As new Technical condition: Very good Battery voltage: 24V Battery capacity: 150Ah Itsdpfjzrck Tex Achsk Battery type: Lithium-ion Battery year: 2021 Battery condition: 80 - 100%

Condition: used, Year of construction: 2016, machine/vehicle number: B3025, functionality: fully functional, operating hours: 1,004 h, input voltage: 400 V, input current: 50 A, Equipment: CE marking, Boschert G-Bend 3210 CNC Press Brake Manufacturer: Boschert Itjdpfsznv R Sjx Achjk Model: G-Bend 3210 Year of manufacture: 2016 Operating hours: approx. 1,000 hours For sale is a well-maintained Boschert G-Bend 3210 CNC press brake from 2016, with only approximately 1,000 operating hours. The machine is in very good technical and visual condition and is ready for immediate use. Equipment Boschert G-Bend 3210 CNC press brake Year of manufacture 2016 Approx. 1,000 operating hours VisiPac CNC control Complete set of tools included Precise and reliable bending technology for a wide range of applications Ideal for use in steel, stainless steel, and aluminum applications Thanks to its low operating hours and extensive tool equipment, the machine is suitable for immediate production use as well as an economical expansion of existing production capacities. Note regarding the sale We are offering this machine on behalf of a client and are acting solely as an intermediary. The sale is made directly by the owner of the machine. We will gladly facilitate the contact and assist you throughout the entire sales process. An inspection of the machine is possible after prior arrangement. We will be happy to send you further technical data, photos, and information about the equipment upon request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2019, total height: 1,505 mm, total width: 955 mm, product length (max.): 1,565 mm, number of axes: 3, This 3s HP 580 MFG COLOR was manufactured in 2019. It features a build volume of approximately 332 × 190 × 248 mm and a printhead resolution of 1200 dpi. With a build speed of up to 1,817 cm³/hour, it utilizes PA12 nylon for full-color capabilities. If you are looking to get high-quality 3D printing capabilities, consider the HP 580 MFG COLOR machine we have for sale. Contact us for further details. • Build volume: approx. 332 × 190 × 248 mm Iedpfsyirxcjx Achetk • Layer thickness: 80 microns • Printhead resolution: 1200 dpi • Build speed: up to approx. 1,817 cm³/hour • Material: PA12 nylon (full-color capable) • Color output: full CMYK color with voxel-level control • No support structures required for most geometries • Software: HP SmartStream 3D Build Manager • Supported file formats: 3MF, STL, OBJ, VRML • Connectivity: Gigabit Ethernet • Power supply: 200–240 V, 50/60 Hz • Typical power consumption: approx. 4.5–6.3 kW