Folding Machine

ERBEND MFB 3220

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Nodpfju Rni Hox Ahujcw Machine feet *

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; Njdpfxsp Stgne Ahuocw roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,000 kg, lifting height: 25,000 mm, Year of construction: 2023, operating hours: 1,336 h, total length: 8,830 mm, construction height: 3,150 mm, drive type: Diesel, load capacity: 6,000 kg, construction width: 2,530 mm, Rotating telescopic handler Speed class: 40 Nsdpfsumvfysx Ahujcw Technical condition: very good Description: The Magni RTH 6.25 is a versatile rotating telescopic handler for assembly, lifting, and material handling on construction sites and in industrial applications. With a lifting height of up to 25 m, a lifting capacity of 6,000 kg, a large reach, and a rotating upper carriage, this machine is ideally suited for working at height and in confined spaces. Robust, powerful, and easy to operate. High off-road capability for a wide range of applications. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FX32 PLUS with a pivoting beam, featuring both fixed and segmented tooling. The Plus model, with its adjustable bending center, maintains a consistent distance to the radius rail throughout the entire bending process. The result is a perfect radius, without causing material stress, regardless of thickness, ensuring a flawless finish and virtually unmatched accuracy in angles and measurements. Technical specifications: Year of manufacture: 2024 Control: CNC with nuLink Mechanical bending compensation adjustment (Crowning system) Working length: 3200 mm Max. bending thickness: 2 mm Bending beam tooling: 7/10 and 20 mm Ncsdpfszc Hviex Ahuow Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) Quick-change segmented tooling High accuracy and repeatability Application: These machines are designed for bending, forming, and profiling sheet metal. They are ideally suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: Ncjdpfx Aeuagxpshuow - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Nedpfxjga T Dpo Ahujcw Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: used, Year of construction: 2008, Maeda mc235 Bj 2008 Hours Hook height 6.30cm Load 2000kg Petrol engine Not sold within the EU No CE Nedpfx Asxc Ek Rjhuocw

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. Ncedpfx Ahsww Hhvoujw The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Ncedpjwwip Ajfx Ahusw Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,274 h, load capacity: 8,000 kg, lifting height: 26,600 mm, fuel type: diesel, construction height: 3,120 mm, empty load weight: 22,500 kg, total length: 8,250 mm, drive type: Diesel, arm reach: 23,100 mm, construction width: 2,530 mm, Rotating telescopic handler Speed class: 40 Technical condition: very good Nsdpfx Ahevgi A Njuecw Description: The Magni RTH 8.27 is a powerful rotating telescopic handler for assembly, lifting and material handling on construction sites and in industrial applications. With a lifting height of up to 26.6 m, a lifting capacity of 8,000 kg, the continuously rotating upper carriage and all-wheel drive, the machine is ideal for heavy loads, work at height and operations on difficult terrain. High reach and excellent off-road capability. Robust, powerful and easy to operate. Further information and a non-binding inquiry can be found on our website - Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sale, service & repair. With us, you get everything from a single source. Lease-purchase, financing and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.