Used Eht Multiswing 4 - 32 for sale (62,944)

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) Ibjdpfexaa A Nsx Afujc - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * swiveling control panel, front right * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes

Condition: used, Year of construction: 2003, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Model: Optimat chf 41 Construction year: 2002 year Condition: used Category ID: 2094 Ibsdpfx Afjzq Hwhsuoc Type ID: 1612 Machine type: circular table saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Iedpfx Ajy A Tpqjfusbc Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D Iedpfx Ajzxhfisfuebc An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. Iodpfxjzl E N Ej Afujbc The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2024, bore capacity in steel (diameter) 32 mm throat 265 mm bore stroke 150 mm taper MK 3 MK Ibedpfx Afjxtfy Hjujc table-size 390 x 390 mm turning speeds 100 - 3300 U/min total power requirement 1,5 KW weight of the machine ca. 0,35 t dimensions 0,8 x 0,6 x 1,95 m Unused display machine with: - Thread cutting attachment - Variable spindle speed - Coolant system

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Iedpfxez Rztvs Afuobc Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V Ibedpfx Aszycpxofusc main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Oil capacity: 300 l Frequency: 50 Hz Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Main fuse: 63 A Main motor power: 15 kW Wiring diagram no.: 11702 Control type: DNC 900 PS Ijdpoyw Rbyefx Afujbc If you have any questions or require further information, please send us a message or contact us by phone.

Year of construction: 2009, condition: ready for operation (used), A hydraulic CNC press brake Eht. Press force: 230t, working length: 4550mm, distance between side frames: approx. 4050mm, max. stroke: approx. 300mm, max. installation height: approx. 500mm, max. throat depth: approx. 405mm, approach speed: approx. 100mm/s, working speed: approx. 10mm/s, return speed: approx. 100mm/s, control: Cybelec ModEva 10S, operating hours: 41789h. Including various punches and dies. Weight: approx. 23,5t, machine dimensions X/Y/Z: approx. 2400mm/5200mm/3100mm. Documentation available. An on-site inspection is possible. Ibedpszpyx Aefx Afuec

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Ibjdpjzd S Thjfx Afuec Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: used, Year of construction: 1992, Max. bending length: 3240 mm Max. sheet thickness: 4 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Ibjdpfx Afszv Tvzjusc Lifting height of the upper beam and material thickness can be preselected via dip switch Central lubrication operation manual 5000 kg

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp Ijdpfx Aszmt Ufsfujbc 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front Ibjdpfx Afexab Tvoujc - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz Ibedpfx Asy D Sy Rofujc - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid Ibjdpfx Ajz Rmcvsfuoc + Short park position left + Short park position right

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Ibedpfx Aewrhwujfusc

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Ibjdpfx Aox Da D Uofusc Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: used, Year of construction: 1999, functionality: fully functional, USED AUTOMATIC BAND SAW, BIANCO 320, BTM 42-32, BUNDLE CUTTING UP TO 250x250 WITH CHIP EXTRACTOR, fully refurbished. TECHNICAL DATA: Cutting capacity at 90° round mm. 320 Cutting capacity at 90° square mm. 320 Cutting capacity at 90° rectangular mm. 320-420 Cutting capacity at 90° bundle mm. 250-250 Standard blade speed (variable) m/min. 12 - 115 Bar feed (single stroke) mm. 500 Main motor power KW 2.2 Hydraulic pump motor power KW 1.5 Coolant pump motor power KW 0.2 Chip extractor motor power KW 0.18 Blade dimensions mm. 5300 x 34 x 1.1 Coolant tank L. 100 Hydraulic unit tank L. 25 Worktable height mm. 830 Machine dimensions mm. 1910 x 3250 x 2100h Net weight Kg. 2300 Accessories: paddle chip extractor, automatic hydraulic bundle cutting up to 250x250 Ibsdpfx Afezhul Ujusc

Year of construction: 2011, condition: used, We offer this used Mecc Alte ECO 32-2L/4 emergency generator, manufactured in 2011. Type: ECO 32-2L/4 Nameplate ID: 0001525665 Date of manufacture: 09/2011 Ibedpfxoz Eiqqo Afuec Number of phases: 3 Continuous operation: S1 Rated speed: 1500/1800 rpm Insulation class: H Rated power (40 °C, 50 Hz): 60 kVA Rated voltage (40 °C, 50 Hz): 115/200/230/400 V Rated current (40 °C, 50 Hz): 301/173/151/86 A Rated power (40 °C, 60 Hz): 72 kVA Rated voltage (40 °C, 60 Hz): 138/240/277/480 V Rated current (40 °C, 60 Hz): 301/173/150/86.6 A Rated power (27 °C, 50 Hz): 62.5 kVA Rated voltage (27 °C, 50 Hz): 115/200/230/400 V Rated current (27 °C, 50 Hz): 314/180/157/90.2 A Rated power (27 °C, 50 Hz) – 2nd set: 75 kVA Rated voltage (27 °C, 50 Hz) – 2nd set: 138/240/277/480 V Rated current (27 °C, 50 Hz) – 2nd set: 314/180/156/90.2 A Protection class: IP21 Weight: 286 kg Moment of inertia: 0.54 kg·m² Bearing designation: 6309.2RS If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm cutting thickness: max. 4 mm length stop range: 10 - 1.000 mm Ibsdpfx Afswzvnteujc

Condition: good (used), Year of construction: 1999, functionality: fully functional, Press force: 225 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC DNC 86 PS Total power consumption: 18.5 kW Machine weight (approx.): 18,000 kg Isdpfxjzd Sqyj Afusbc Space requirement (approx.): 5180x2400x3200 mm Equipment: - CNC control system Cybelec - Pneumatic upper and lower tool clamping - Die shifting - Light curtain on the machine - 2 support arms in front of the machine - Controlled axes y1, y2, x, r, z1, z2 - Compensation - 2-hand foot control - Side protective doors

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: Iedpfxetqmvzj Afusbc - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: used, Year of construction: 1994, functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, table width: 700 mm, table length: 1,800 mm, overall weight: 10,500 kg, Anayak VH 1800 bed milling machine with 4th axis Control system: Heidenhain TNC 415 B 4th axis as a rotary table, table diameter approx. 530 mm Tool holder: SK 50 Ijdpfx Aoypxtasfuobc Machine is operational; a test run is possible. However, it is sold without any warranty. Sale by offer/bid. Machine is still connected to power. Overhead crane available for loading.

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Ijdpfxoxw N N He Afusbc Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -