Used Correanayak Anayak - M-20050211 for sale (69,723)

Condition: like new (used), Year of construction: 2005, Retrofitted: 2026 Dwjdpey Az H Dsfx Ah Noa Numerical control: TNC-i530 Technical features Dimensions Table dimensions: 2500 x 2000 mmTable construction: Continuous rotation with a hydraulic breakNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1500 mmZ axis traverse: 1300 mmVertical capacity (VC): -5 / 1295 Milling head Auto-indexing Orthogonal 90º - Bodies B C (1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 5000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 20000 mm/min Weight and dimensions Machine weight approximate: 39000 kgMaximum weight on table: 13000 kgMachine dimensions approximate: 7980 x 8000 x 3750 mm Accessories Guarding: Peripheral without roofAutomatic tool changer: ATC-60Chip conveyor: 1 rear longitudinalElectronic handwheel: HR-410Coolant: External internal high-pressure coolant through spindleCoolant filter: Paper strip filter Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Dodpfx Ahjyf Dp Ej Newa Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Dwodozcpg Dspfx Ah Nsa Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: HVM-7870, CNC: Heidenhain TNC 620 Travel: X-axis 2,700 mm Y-axis (transverse) 1,200 mm Z-axis (vertical) 1,000 mm Feedrates: Feedrates for all axes 2 - 10,000 mm/min Rapid traverse for all axes 10,000 mm/min Worktable Dimensions 3,300 x 1,000 mm Max. table load 5 t/m² Milling spindle Tool holder ISO 50, DIN 69871 Pull stud DIN 69872, form A Min./max. spindle speed 20-4,000 rpm Power 30 kW Automatic milling head finding 2.5° in both milling head axes Dwjdpfoztbrljx Ah Nsa Tool changer Tool positions 40 Max. tool diameter 115 mm Clearance for secondary tool positions 200 mm Max. tool length 350 mm Max. tool weight 25 kg Tool change only in horizontal spindle position

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-426 Dedpfx Ahsugbrqs Nowa Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5300 mmVertical traverse Y: 1050 mmTransversal traverse Z: 1500 mmVertical capacity (VC): 80 - 1130 Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approximate: 43000 kgMachine dimensions approximate: 11560 x 6150 x 3538 mm Accessories Guarding: 2 front sliding doorsAutomatic tool changer: ATC40Chip conveyor: 2 longitudinals hinge typeElectronic handwheel: HR-410Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Djdexcgtgopfx Ah Nowa Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2008, machine/vehicle number: 220028, CNC control: HEIDENHAIN iTNC 530, travel ranges: X-axis 4300 mm, Y-axis 1500 mm, Z-axis 1300 mm, table size 4970 mm x 1200 mm, max. table load 15,000 kg/m, tool holder ISO 50, multi-angle milling head 45°, automatic angular positioning of axes B and A, spindle motor power 22 kW, hydraulic rotary lock, working feed rate 10,000 mm/min, rapid traverse rate 20,000 mm/min, with coolant system, total spindle operating hours: 25,496 hours. Dodpfx Aozn A U Roh Njwa

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 3,000 rpm, workpiece weight (max.): 5,000 kg, TECHNICAL DETAILS Travel in X-axis: 2,000 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 1,100 mm Maximum workpiece weight: 5,000 kg Clamping area (L x W): 2200 x 850 mm Number of T-slots: 5 Width of T-slots: 22 mm T-slot spacing: 150 mm Feed rate in X/Y/Z axis: 10,000 mm/min Rapid traverse rate in X/Y/Z axis: 20,000 mm/min Spindle speed: 60 - 3,000 rpm Swivel range of the milling head: -180°/+177.5° Positioning of the milling head angle: Automatic in the A+B planes Positioning accuracy: ±0.014 mm Repeatability: ±0.008 mm Ball screw diameter in X/Y/Z axis: 63 mm Ball screw pitch in X/Y/Z axis: 16/10/10 mm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Motor power: 38 kW Power of the hydraulic unit: 1.8 kW Operating pressure of the hydraulic unit: 110 bar Capacity of the hydraulic unit tank: 100 l Delivery rate of the hydraulic pump: 9 l/min Power of the cooling unit: 1.36 kW Dsdpfx Ahjzmfn De Nowa Air pressure: 6–7 bar Air flow rate: 50–225 l/min Power supply: 400 V; 50 Hz Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,000 x 2,900 mm Total weight: 14,000 kg EQUIPMENT Two-stage spindle speed control

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Dwoderx Rtrspfx Ah Noa Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: used, Year of construction: 2007, operating hours: 39,215 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 4,000 rpm, controller model: Fanuc 18i-MB, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,100 mm Table dimensions: 2,700 × 850 mm Table load capacity: 6,000 kg Spindle connection: ISO 50 – DIN 69871 AD Spindle power: 22/26 kW Spindle speed: 60–4,000 rpm Gear stages: 2 Working feed rate: 20 m/min Rapid traverse rate: 10 m/min Axes: A- and B-axes Division: 2.5° MACHINE DETAILS Dsdpfx Aszmw I Aeh Newa CNC control: Fanuc 18i-MB Coolant pressure through the spindle: 23 bar Machine weight: 16 t Operating hours: 39,215 h EQUIPMENT Automatic 2-axis swiveling head for the A- and B-axes Two-stage spindle gearbox Coolant supply through the spindle at 23 bar Note: The functionality of the spindle cooling system was not tested prior to the auction. A surcharge of €500 will be applied for the necessary equipment if container loading is required.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Control system: HEIDENHAIN iTNC530 Dwsdpfx Ahjzg Dq Ds Nea Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction

Condition: used, Year of construction: 1994, functionality: limited functionality, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, table width: 700 mm, table length: 1,800 mm, Anayak VH 1800 bed milling machine with 4th axis Dsdpfx Ajypxtash Nswa Control system: Heidenhain TNC 415 B 4th axis as a rotary table, table diameter approx. 530 mm Tool holder: SK 50 Machine is operational, further condition unknown Machine is still connected to power Overhead crane available for loading

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h Dodpsyry Rfofx Ah Nswa - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H Dwjdpszc D Enofx Ah Nsa machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas Dwedpfx Ahsrx Rxte Nsa For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Dsdpfoxc Hh Dex Ah Nowa Tool blocking power 1968 daN Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Revised in 2022 Axes X-axis travel mm: 2.000 Y-axis travel mm: 1.000 Z-axis travel mm: 1.100 C-axis degrees: 0.001º (cont) Worktable Table dimensions mm: 1.250x1.400 Maximum weight on table kg: 5.000 Dodorxfniepfx Ah Nowa Spindle Spindle speed rpm: 60 - 5.000 Automatic Spindle (Axes A/B): 2. 5º/2. 5º Tool system Tool holder: ISO-50 DIN 69871A Tool magazine slots: 60

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. 🛠 Key technical specifications: • X-axis travel: 8300 mm Dedpjqpd D Isfx Ah Njwa • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Full retrofit includes: • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,859 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,500 mm Number of stations: 90 Head and rotary table: 1,600 x 1,450 mm MACHINE DETAILS Control type: CNC Dwodpfoy R Dnajx Ah Nja Control: Heidenhain Operating hours Control on-time: 106,253 h Machine on-time: 93,170 h Program runtime: 41,859 h

Condition: ready for operation (used), Year of construction: 2004, operating hours: 8,087 h, functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 5,000 rpm, table height: 925 mm, The machine has undergone a complete inspection, with the milling head and the telescopic cover of the X-axis repaired. Additionally, the control panel and the polycarbonate doors have been renewed, and the machine has been thoroughly cleaned. TECHNICAL DETAILS Travel distances X-axis: 5,300 mm Y-axis: 1,500 mm Z-axis: 2,000 mm A-axis: +45° to −225° B-axis: +165° to −18° Spindle data Spindle speed range: 60 – 5,000 rpm Tool holder: SK 50 DIN 69871 Spindle outer diameter (front bearing): 140 mm Spindle bore: 90 mm Table dimensions Dsdpfexbd A Nex Ah Nowa Clamping area: 6,000 × 1,200 mm Table height: 925 mm Feed rate: 10 – 6,000 mm/min Rapid traverse (X & Y): 15,000 mm/min Rapid traverse (Z): 10,000 mm/min MACHINE DETAILS Control system Manufacturer: HEIDENHAIN Model: TNC 530 Operating hours Spindle hours: 8,087 h Control system on-time: 3,785 h Machine on-time: 30,238 h Note: The machine has already been dismantled.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, Rotary table 1,250 x 1,400 mm (interference circle 1,700 mm) Heidenhain 530 Diagonal milling head with 1° x 1° indexing Speed up to 5,000 rpm Tool holder SK50 Tool changer with 40 positions Internal coolant supply with 19 bar Chip conveyor in longitudinal direction Dwedpfx Aex Iuccsh Nea

Condition: good (used), TECHNICAL DATA SHEET • CNC: Heidenhain TNC 430 • Table surface: 7,100 x 1,200 mm • Longitudinal travel (X-axis): 7,000 mm • Cross travel (Y-axis): 1,500 mm • Vertical travel (Z-axis): 1,500 + 500 mm • Rapid traverse (axes): 20,000 mm/min • Maximum working feed: 10,000 mm/min • Automatic head with 1° / 1° indexing: Included • DVPE 1000 rotary table with 1200 x 1200 mm surface • Spindle taper: SK-50 Dwedpfxjxqq Rre Ah Nsa • Speed range: 20 – 3,500 rpm • Number of speed ranges: 2 • Main motor power: 50 kW • Automatic tool changer: Included • Tool magazine capacity: 60 positions • Internal coolant supply: Included • Chip conveyor: Included • Electronic handwheel: Included • Additional paper filter tank: Included • Operator platform: Included • Enclosure with 4 sliding doors: Included • Maximum table load: 30,000 kg • Machine weight: 45,000 kg

Year of construction: 2001, operating hours: 27,046 h, condition: excellent (used), functionality: fully functional, CNC traveling column milling machine in cast iron design Extremely stable design thanks to the X-axis with triple guidance and a fixed table. Machine will be delivered EXW. TECHNICAL DETAILS X-axis (longitudinal) linear guide: 5,300 mm (triple guidance) Y-axis (traverse) linear guide: 1,000 mm (double guidance) Z-axis (vertical) flat guide: 1,500 mm (double guidance) Spindle speed range: 60 to 3,000 min-1 Tool holder: SK 50 Tool changer: 40-position Pull stud: DIN 69872-B Drive power: 30 kW Tool dimensions: max. L=350mm / D=200mm Table size: 6000x1000mm Heidenhain control: TNC426 with color screen and handwheel Rapid traverse X, Y, Z axes: 10,000 mm/min Clamping area: 6,000 x 1,000mm T-slots: 22 H12 / spacing 130mm Central T-slot: 22 H7 MACHINE DETAILS Operating time: 62,774 hours (as of 11/2022) Djdpfx Aelhqkhsh Nswa External coolant pump: 1.1 kW with 50 l/min Machine weight: 43,000 kg EQUIPMENT - Electric handwheel Heidenhain - Swivel machining function monitored with light barriers - New X-axis covers - Chip conveyor, 2-stage - New milling head bearings, 2021 - Operating manual / documentation CONDITION - Service and maintenance have been performed according to schedule - Geometry is in good condition - Suitable for swivel machining Machine available from July-August

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Dodpsdzc Rxsfx Ah Nswa Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Dwodpfxeb Tmrve Ah Noa Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.