Used Branson Emerson Heating Element Welding Machine For Plastic for sale (81,473)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m Gedpfsykvdlex Aaxeuh - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Year of construction: 2010, condition: good (used), functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm Guodpfx Aasvt Sc Eexjh LxWxH: 400 x 500 x 1200 mm

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Gsdpfxozdiz No Aaxeuh Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer Gusdsz D Uguepfx Aaxjh

Year of construction: 2017, condition: excellent (used), REF: MM6476 Gsdpfx Aszrg T Ejaxouh 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Gujdpfxex Utd Eo Aaxeh Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Year of construction: 2012, condition: used, Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo Godpjqy Rl Hofx Aaxsuh -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. Gusdpfjv Uzf Eex Aaxeh We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz Gjdpfxoxlr Tdj Aaxouh

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 091600214, total width: 7,744 mm, total length: 8,408 mm, total height: 2,000 mm, feed length X-axis: 4,561 mm, feed length Y-axis: 6,856 mm, type of cooling: air, Seamless V-perfect technology welding machine, graphic representation of 19 axes, CNC controlled. No more need for edge finishing. Gjdpfx Aozdr D Tsaxsuh 139,545 welded elements. External maximum welding dimensions: 4000x2800mm. Calibrated for Schüco CT70/Living 82; welding blocks not included.

Condition: good (used), Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg Guedpfowubqtjx Aaxsh

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, Demonstration model, still in the box, Godpfxjz Az D Is Aaxeuh

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Gedpfx Aaeza T A Roxsuh The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Gusdpfszpyfcex Aaxeh

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Godpfxsyimqwo Aaxsuh Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 8382, 2-head welding machine for PVC profiles Godpfx Aezdq Ttsaxjuh

Year of construction: 2024, condition: used, Manufacturer: Ziemex Processing Equipment Year: 2024 Model: Z-compact Serial number: 1403204 Type: Welded plate heat exchanger Material: 1.4404 stainless steel (316L) Godpfx Aoz Iubmjaxsuh Fluid: Oil (circuit B) / Water (circuit A) Circuit B volume: 59 L Circuit A volume: 6 L Permissible pressure: 0 to 6 bar Permissible temperature: 0 to +200 °C (circuit B) / 0 to +110 °C (circuit A) Test pressure: 9.5 bar (circuit B) / 8.7 bar (circuit A) Fluid group L1G GR2 Heat exchange surface area: 4.2 m² Unladen weight: 142 kg The Z-compact® welded plate heat exchanger combines the thermal efficiency of a plate heat exchanger with the mechanical robustness of a shell-and-tube heat exchanger. L'échangeur de chaleur à plaques soudées Z-compact® allie le rendement thermique d'un échangeur de chaleur à plaques à la robustesse mécanique d'un échangeur de chaleur à calandre et tubes. Under equivalent operating conditions, the Z-compact® offers better heat transfer than a conventional tube-and-shell heat exchanger. Its heat transfer surface is more efficient and its pressure drops are lower.

Condition: good (used), Year of construction: 2004, EMA high-frequency welding machine with cooling water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V 106 A Foot pedal Water cooling, cooling water unit Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of delivery. Gsdsd Tv H Depfx Aaxsuh You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following application: Gedpfsg Icfpex Aaxouh Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft-soldering machine, copper band welding machine), consisting of a main machine and control system, "PLC control, touchscreen operation". Process description: The workpiece carrier enters the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding chuck. The welding chuck moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process takes place. This process is repeated until the armature is completely welded. The welding chuck moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the conveyor system; I0 armatures are conveyed to the removal conveyor. Technical data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse rating: 35 A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. Godpfx Aaowm Nq Ejxsuh • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Gsdpfx Aajz D Hyyexeuh Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Gedpfoznwq Tsx Aaxsuh

Condition: used, Bielomatik Type: K3633/023 Bielomatik Laser Welding System Gjdpfxezgaazs Aaxjuh Machine Description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. In the middle part of the machine frame is the working area with the welding station, the tool (on the rotary table), and the clamping system for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area by a laser-proof enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser Type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic Data Machine Equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted. Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is firmly mounted on the back of the machine. Laser system from IPG. 1 fiber laser 300W cw, at the fiber optic end, 1070nm - completely air-cooled. 1 power supply for laser unit, pilot beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour 1 Scanner - 20 aperture Optics, F-Theta lens, focal length determines the processing field and processing distance 2x base tool, tool coding with transponder Clamping system for holding a mask with absolute encoder with pneumatic clamping system for controlled pressing of each welding part Pneumatic air shower for protection of the lens housing Microbox PC427B incl. RTX (Siemens) Pre-installed software - Siemens S7 PLC Profibus, Profinet, Ethernet, RS232 interface Touch panel 15” for operation and data/parameter input, machine lighting Connection flange for on-site extraction Machine Data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly screwed onto the machine frame. Area requirement: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse: 16A Exhaust: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Condition: used (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2023, functionality: fully functional, laser power: 1,200 W, Laser welding machine MaxPhotonics MA1-45, manufactured in 2023, with wire feeder, handheld laser gun with 5-meter cable, ground wire for safety with 5-meter cable, basic assortment of nozzles (for various applications), 1 Protect Starlight safety glasses, nitrogen pressure regulator, with wobble function, deflection 0-4mm, suitable for structural steel, aluminum, and stainless steel. Up to 4mm thickness. Interface for external safety components. The machine is fully functional. Gjdpfsz D Dwcox Aaxeuh

Condition: reconditioned (used), functionality: fully functional, total width: 620 mm, total length: 1,450 mm, Cleaning and welding line URBAN- AKS 1610+TBA+SV 530/WT 530 Guodpfx Aajrunl Hexoh Operating direction: right to left. The entire line is 6200 mm wide and 14500 mm long. AKS 1610: weld bead limitation 0.2 mm - Horizontal 4-head welding machine for vinyl window profiles at a 90º angle. - Equipped with an integrated discharge system for conveying to cleaning machines. - Electronic positioning. - SPS central control with keyboard and display. - PLL parallel welding system – as standard, increases corner strength by up to 20%. - Dimensions of welded elements: min. 410 x 370 mm (width X height Y) max. 3500 x 2300 mm (width X height Y) - Equipped with a gasket moulding system for 4 welding heads. TBA Conveyor table (between welder and cleaning machine) - Width 2600 mm, length 3500 mm, 8 guide rails. Driven, for automatic production lines. Electrically-driven conveyor table, transport belts with velour or super grip coating. Linking of several conveyor tables is possible. SV 530 CNC corner cleaning machine - Up to 17 tooling locations. - 2 axes. - PC with freely programmable CNC control, programmed on screen. - Simple programming of machining steps in group mode, single program selection, list, or automatic. - User-friendly diagnosis and service routine. Standard equipment: - Inner frame stop - 2x cutting/grooving knife unit NO/NU - 1x disc cutter with a saw blade 5mm (SF) - 2x inside grooving knife unit IO/IU Profile height: min. 30mm, max. 130mm/200mm Profile width: min. 20mm, max. 150mm Inner frame dimension: 210mm x 210mm Incl. turning device WT-530 Dimensions: width: 6200 mm, length: 14500 mm Completely refurbished, 6-month warranty on parts. Ready for operation. Available for inspection at the company's headquarters.