Used Biesse Rover A Edge 1632 for sale (68,982)

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle Isdpfx Aasugpwns Ioth No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: ready for operation (used), Year of construction: 2017, number of axes: 5, This 5-axis BIESSE Rover A Edge 1643 was manufactured in 2017. It features a versatile CNC machining center with an edge banding unit, ideal for various applications. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover A Edge 1643 machine we have for sale. Contact us for further details. Additional equipment 5 Axis milling spindle Iodjzdi Hxopfx Aa Ijth • Edge banding unit

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Itodpfx Aaozdqtto Ish Maximum edge height: 65 mm Total number of drilling spindles: 24 Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working area X: 3280 mm Itjdpfx Ajy Ukv Sja Ieh Working area Y: 1620 mm 5-axis electro-spindle, power 11 kW Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 1 grooving blade in the X direction Linear tool changer with 12 positions Work table with 6 stops Software: bSolid Control panel BUSCH vacuum pump, 245 m3/h Safety mats Protective screens Approximate weight: 3400 kg. Electro-spindle used for only 8 hours, condition like new.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Itsdpsxraimjfx Aa Ieh Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type Numerical Control Type ?? / Software Biesse Works N. 1 Working table with N. 10 supports ATS (L = mm 1800) Automatic Tools Changing System (Store /14 folds-positions) Itedpfsy Nk R Esx Aa Ijh Useful working area (X - Y - Z) mm 6735 x 1650 x 290 Useful working area (X - Y - Z) in edge banding mm 5780 x 1650 x 60 N. 2 Working areas n. 1 Vacuum pump (capacity m3/h) 250 Front emergency carpets - Motorized carpet to evacuate the wastes from the working process Total power installed KW 31.13 Working group (top): N. 20 Independent vertical boring spindles N. 8 Independent horizontal boring spindles N. 1 Circular Saw N. 1 Vertical electro-spindle HSK F63 (Kw 13,2) Edge Banding group on board, with Glueing Unit (Hot Melt glue) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 4 reels)

Condition: excellent (used), Year of construction: 2015, For sale: 4 units of CNC ROVER BIESSE 2231. Years of manufacture: 2013, 2014, 2015, 2016. In very good condition. Itjdpfjx Tbk Rsx Aa Ish

Condition: good (used), Year of construction: 2018, machine/vehicle number: 1000028154, functionality: fully functional, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Description Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: Itjdpfx Ajxdl H Uja Ish HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Drilling head: HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Work table: 6 cross beams Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Condition: used, machine/vehicle number: 008501, Position 1: 5 Axis CNC Routers BIESSE-ROVER A - SYNCHRO Position 2: Panel Feeding and Loading BIESSE-ROVER A - SYNCHRO Iodpoy Af Husfx Aa Ijth

Condition: used, Year of construction: 2012, total height: 2,400 mm, total length: 13,500 mm, total width: 2,450 mm, Colour: Grey Empty weight: 2.500 kg Biesse Rover A1536 G FR Year 2012 Central lubrifaction FT work table, X 3765 Y 1560, 9 zones 12 kW electro spindle, ISO 30, air cooled Biesse WORKS Biesse NEST MODULE Air conditioner 16 pos. revolver magazine Work area XYZ 3765*1585*170 2x vacu pump 250 m³ C axis 360° BH 17 L drilling group Including loading and unloading system - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 81399 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Flat table - Tool clamping system: ISO30 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 7 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Unloading system, Loading system - Table length [mm]: 3765 - Table width [mm]: 1560 - Working range X [mm]: 3765 Iedpownip Dofx Aa Ieth - Working range Y [mm]: 1585 - Z-axis working range [mm]: 170 - Transport dimensions: 13500mm x 2450mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Flexible front unit protection for loading unlimited Y-size Isdsy U Naiopfx Aa Ieth (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Itsdpfx Aaey H Dzfs Ijh Total number of tool changer positions: 34

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: Itodpfxsy Sglko Aa Ieh • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Itodpfjx A Tk Sox Aa Ieh Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Itedjyqxxrspfx Aa Ish Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Itodpfx Asx A Tfvsa Ieh Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Itsdpfxeycvcxs Aa Ioh

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,140 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details. • Working range • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with H=74 mm vacuum modules): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and drives • X & Y: Rack and pinion drive; accuracy class 6 • Z: Ball screw with preloaded nut; accuracy class ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control system and PC hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Monitor: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension Itodpjyt Rrvefx Aa Ijh • Connectivity: Ethernet card; USB ports • Electrical and pneumatic • Power supply: 380 / 400 / 415 V – 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Cabinet cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7–10 minutes runtime for data protection • Workpiece support (ATS system) • Workpiece supports: 8 ATS aluminum supports on linear guides • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping • Set-Up Assistant (SA): Manual positioning with LED indicators; ±1.5 mm precision • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and maintenance • Safety system: Bumper system (front and rear) for immediate stop upon collision • Protection: Polycarbonate transparent front plate and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (supported/optional): Up to two units, 90/100 m³/h or 250 m³/h each

Condition: used, machine/vehicle number: 008359, X axis working area: 2500 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Isdox Swcaepfx Aa Isth Number of controlled axes: 4 axes Total number of drilling spindles: 16 Total number of tool changer positions: 22

Condition: excellent (used), Working center with edgebanding unit in very good condition. Ijdpfx Aaoylcgpe Ieth Technical data will be updated soon.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working range X: 3200 mm Working range Y: 1330 mm Working range Z: 170 mm 5-axis electrospindle, power 11 kW Drilling heads for vertical drilling: 16 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 4 2 blades for grooving in X and Y directions Lateral linear tool magazine with 10 positions Revolver tool magazine with 16 positions Work table with 6 stops Itedpfxoy S Av Eo Aa Ioh Automatic lubrication system Air conditioning system for the electrical cabinet Vacuum pump with a capacity of 250 m3/h Control: BHC 660 Control panel Safety mats Protective netting Available from mid-July.

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle motor power 13.2 kW Spindle Speed 24000 RPM Number of axis 3 Movement X-Axis Movement 3765 mm Z-Axis Movement 378 mm Itsdpex Nr Npefx Aa Ieh Y-Axis Movement 1560 mm This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness (edge banding unit): 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction beam traverses: 10 Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Glue unit Tool magazine Grooving unit Number of places in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety grid Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8011 Itsdpfxeyqzrno Aa Ish

Condition: used, machine/vehicle number: 008414, X axis working area: 3140 mm Y axis working area: 1500 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Iodpfx Ajywafhoa Ijth Total number of tool changer positions: 13

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 57269, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,205 mm, controller model: NC 1000, TECHNICAL DETAILS X-axis working range: 4,300 mm Y-axis working range: 2,205 mm Vertical spindle: 1 unit, HSK F63 Tool changer system: 8 positions (head) Tool changer system: 21 positions (rear, chain) Drilling head: BH 20 Vertical spindles on X-axis: 8 units Vertical spindles on Y-axis: 8 units Horizontal spindles on X-axis: 4 units Horizontal spindles on Y-axis: 4 units Saw unit on X-axis: diameter 120 mm Saw unit on Y-axis: diameter 120 mm MACHINE DETAILS Control: NC 1000 Software: Biesse Works Weight: 400 kg EQUIPMENT FT nesting table with full surface Automatic loading system with side lift table Automatic labelling machine for barcode printing Isdpfsydkdgox Aa Ioth Automatic printing and dispensing system for adhesive labels Automatic unloading system with motorized conveyor belt Front safety and protection system with mats and fences Automatic lubrication system Air conditioning for control cabinet Vacuum pump