Used Arburg Allrounder 920H 5000-4600 for sale (2,744)

Year of construction: 2020, condition: ready for operation (used), overall weight: 28,400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Additional equipment Iodox U Tqrepfx Am Isar • The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) Machine Benefits Technical Machine Benefits • Pump hours in operation: 1769 hours, hours in automatic cycle: 695 hours • Clamping force: 5000 kn / injection unit: 4600 • Opening stroke: 900 mm / distance between bars: 920 x 920 mm / mould height min-max: 400-1050 mm • Size of mold platens: 1280 x 1280 mm / ejector stroke: 250 mm / ejector force: 86 kn Extra Information The machine has been used very little

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW Iasdpjydnigefx Am Ior • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: new, Year of construction: 2023, functionality: fully functional, Clamping force: 500 t Screw diameter: 60 mm Shot weight: 620 g Distance between tie bars V: 920 mm Distance between tie bars H: 920 mm Shot volume: 678 cm3 Iodpjyg I A Sefx Am Ioar Type: Multicomponent Drive: Hybrid Special multicomponent machine

Condition: good (used), Year of construction: 2004, On request and for an additional charge, loading and transport (throughout Europe) can be arranged. All prices include VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Iodpfx Amexirqqj Ioar Phone: Mobile: (also via WhatsApp) Web: Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Iedpsyxhaiofx Am Ijar Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, Technical Data Clamping Unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum daylight: 900 mm Opening stroke: 500 mm Rotary table diameter: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical Data Injection Unit Screw diameter: 50 mm Shot volume: 392 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 Nm Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions LxWxH: 4.11 m x 2.65 m x 4.81 m Total weight: 22,000 kg Equipment Display text German Display text English Iedsy Ak Nujpfx Am Ioar CEE socket 16A Hydraulic core pull 4x Air valve 1x Machine with water battery Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) Isdpfjy Akpusx Am Iear machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Full technical specifications in the attached document Clamping force: 1300 kN Opening force: 35/350 kN Iaedpfx Amsyx D Nge Isr Opening stroke: 500 mm Mould installation height (min): 250 mm Distance between platens (max): 750 mm Tie bar spacing: 420 x 420 mm Ejector force: 40 kN Ejector stroke: 175 mm Screw stroke: 145 mm Screw diameter: 35 / 40 / 45 mm Injection pressure: 2500 / 2120 / 1670 bar

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Full technical specifications in the attached document. Please note: Iodpfsyx D Aysx Am Ioar 5 extra machines are available (ARBURG Allrounder 420C 1000-250) Contact us for more information. Clamping force: 1000 kN Opening force: 35/250 kN Opening stroke: 500 mm Mould installation height (min): 250 mm Distance between platens (max): 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Injection pressure: 2470 / 1820 / 1390 bar Screw diameter: 30 / 35 / 40 mm

Condition: used, Year of construction: 2003, Arburg injection moulding machine available for immediate purchase. Machine is still in operation. Viewing possible upon appointment. Full technical details in the attached documents/pictures. Clamping force (max.): 3200 kN Ijdpfx Aoyw Snbem Ijar Mold opening force (max.): 130 kN Opening stroke (max.): 700 mm Ejector force (max.): 100 kN Ejector stroke (max.): 250 mm Screw diameter (mm): 60/70/80 Effective screw length (L/D): 23/20/17.5 Shot volume (cm³): 792/1078/1407 Injection pressure (bar): 2500/2000/1530 Injection flow (cm³/s): 224/306/400 Distance between platens (max.):: 1000–1400 mm

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units Iedpfxoygx Uro Am Ijar

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 Iodsyv D T Tepfx Am Ioar interface EUROMAP 73 interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: good (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, warehouse no.: 503604 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: Selogica year of construction: 2012 operation hours: 43331 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 1300 mm opening stroke: 600 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2470 bar equipment included screen text german core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling Iajdpfxjyvzyqo Am Ior machine incl. safety fencing Anti vibration mounts measures of machine l x w x h: 6.12m x 2.25m x 2.21m total weight: 12200KG technical data robot-system handling type: Linearroboter manufacture: Arburg controller: Multilift year of construction: 2012 X axis: 400 mm Z axis: 1400 mm C axis rotation: 90 ° total weight: 450 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, injection pressure: 2 bar, ejector force: 225 N, ejector stroke: 90 mm, plate length: 900 mm, plate width: 900 mm, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german CEE-socket 16A CompactFlash interface for data storage core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface OPC Schuko-socket 10A selection unit Iaedpfx Amjyvzyke Ior measures of machine l x w x h: 6.4m x 1.95m x 2.21m total weight: 12140KG

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls Iodpfx Amoyxdwdj Isar • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Iedpfxjx D Nc He Am Ijar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: Iajdpsywzv Isfx Am Ior - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Iasdpfxsytd Sps Am Ijr Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, ARBURG Allrounder 375 V 500-170 Stock no.: 503615 Manufacturer: ARBURG Model: Allrounder 375 V 500-170 Iajdpfx Aeytdfijm Ier Control: Selogica-direct Year of manufacture: 2013 Operating hours: 36,163 h Technical Data – Clamping Unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum platen distance: 302 mm Opening stroke: 225 mm Rotary table diameter: 900 mm Ejector force: 70 kN Movable platen centering diameter: 125 mm Tool weight: 230 kg Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 59 cm³ Injection pressure: 2,500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 3 m x 1.6 m x 3.48 m Total weight: 3,540 kg Equipment Display language: German Rotary table 1x hydraulic core pull Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate safety

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet Iaodpfox D E Dyjx Am Isr • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Year of construction: 2003, condition: ready for operation (used), screw diameter: 45 mm, This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information. Ijdpfeyaizijx Am Ioar

Condition: ready for operation (used), Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, injection weight: 132 g, overall weight: 3,650 kg, This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information. Iodpfsyglrwsx Am Ioar • Opening stroke: 500 mm • Platen size: 570 x 570 mm • Max. volume: 144 cm³

Year of construction: 2006, condition: ready for operation (used), This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Clamping force: 800 kn Ijdpfx Ameyaizpo Ijar • Distance of the tie bars: 1200 mm / screw diameter: 25 mm / max part weight (g, ps): 45 / core pull: 1 • Configuration: vertical

Year of construction: 1998, condition: ready for operation (used), Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. Including two dosing units. An on-site inspection is possible. Iedpfx Asyx H Hhom Isar

Condition: good (used), Year of construction: 2002, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 427 cm³, injection pressure: 2,080 bar, mold height (min.): 300 mm, Technical Data – Arburg 570C 2000-675 General Information: Year of manufacture: 2002 Control system: Selogica Injection unit: Type: … / 675 Screw diameter: 55 mm Specific injection pressure: 2080 bar Shot volume: 427 cm³ Clamping unit: Type: 2000 / … Clamping force: 200 t Iajdpfx Aoyxnr Som Ior Platen dimensions: 950 × 950 mm Tie bar spacing: 570 × 570 mm Mold height: 300 mm Opening stroke: 650 mm Maximum platen distance: 950 mm