Used Alvmac Mc Dynamic 25S for sale (9,924)

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, Automatic wheel banding machine. Todszhtb Ijpfx Ac Tjb

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring Tedpfx Acsw S Ii Nj Tjb - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: used, total length: 2,910 mm, Year of construction: 2023, load capacity: 2,500 kg, - Reifen: Solideal, Vollgummi grau, Typ Magnum - Reifengröße: vorne 18x7-8, hinten 15x4,5-8 - Radstand: 1635 mm - Bodenfreiheit Mitte: 70 - Proportional ausfahrbarer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Mobile Kopf ( -70°/-35°/0°/+10°) - Struktur für Windflaschen und Haken an Bord - Maximale Tragkraft 2500kg - Vorderradantrieb Nr. 2 Elektromotor AC 2 kW 24V. Isolationsklasse H - Abnehmbare Kontergewichte Kg. 750 - Batterie 24 V - 420 Ah 8 Arbeitsstunden - Antriebsräder: Vorne: Nr.2 superelastich 18x7-8” Hinten: Nr.2 superelastich 15x4 1/2-8” - Lenkung: über die Hinterachse Lenkwinkel -90°/+90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +65°/-15° Todpfx Ajztgfwec Tsb - Elektromotor 3 kW - 24 V AC, Isolationsklasse - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Gemeinschaftsrichtlinien 2006/42/CE- 2000/14/CE -2014/30 UE 2014/35/UE - D.Lgs 262/2002 und nachfolgende Änderungen

Condition: used, total length: 2,750 mm, Year of construction: 2023, load capacity: 2,500 kg, - Reifen: Solideal, Vollgummi grau, Typ Magnum - Reifengröße: vorne 18x7-8, hinten 15x4,5-8 - Radstand: 1635 mm - Bodenfreiheit Mitte: 70 - Proportional ausfahrbarer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Mobile Kopf ( -70°/-35°/0°/+10°) - Struktur für Windflaschen und Haken an Bord - USB- Anschluss - Maximale Tragkraft 2500kg - Vorderradantrieb Nr. 2 Elektromotor AC 2 kW 24V. Isolationsklasse H - Abnehmbare Kontergewichte Kg. 750 - Batterie 24 V - 420 Ah 8 Arbeitsstunden - Antriebsräder: Vorne: Nr.2 superelastich 18x7-8” Hinten: Nr.2 superelastich 15x4 1/2-8” - Lenkung: über die Hinterachse Lenkwinkel -90°/+90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +65°/-15° - Elektromotor 3 kW - 24 V AC, Isolationsklasse - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Gemeinschaftsrichtlinien 2006/42/CE- 2000/14/CE -2014/30 UE 2014/35/UE - D.Lgs 262/2002 und nachfolgende Änderungen Tjdpeztglwsfx Ac Tob

Condition: new, total length: 2,910 mm, Year of construction: 2025, load capacity: 2,500 kg, - Reifen: Solideal, Vollgummi grau, Typ Magnum - Reifengröße: vorne 18x7-8, hinten 15x4,5-8 - Radstand: 1635 mm - Bodenfreiheit Mitte: 70 - Proportional ausfahrbarer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Mobile Kopf ( -70°/-35°/0°/+10°) - Struktur für Windflaschen und Haken an Bord - USB- Anschluss - Maximale Tragkraft 2500kg - Vorderradantrieb Nr. 2 Elektromotor AC 2 kW 24V. Isolationsklasse H Tedpfx Acexpx Rwj Teb - Abnehmbare Kontergewichte Kg. 750 - Batterie 24 V - 420 Ah 8 Arbeitsstunden - Antriebsräder: Vorne: Nr.2 superelastich 18x7-8” Hinten: Nr.2 superelastich 15x4 1/2-8” - Lenkung: über die Hinterachse Lenkwinkel -90°/+90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +65°/-15° - Elektromotor 3 kW - 24 V AC, Isolationsklasse - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Gemeinschaftsrichtlinien 2006/42/CE- 2000/14/CE -2014/30 UE 2014/35/UE - D.Lgs 262/2002 und nachfolgende Änderungen

Condition: excellent (used), CATALOG NUMBER 7153 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper dimensions (H/W): 920x870mm - Output: approx. 110kg/h - Automatic machine operation - Oil cooler - Oil pre-heating Tedpfszxqxrex Ac Tob - Inspection window - Motor: 7.5kW - Dimensions (L/W/H): 1750x1300x1460mm - Weight: 825kg ADVANTAGES – Unpainted – Italian production – Used briquetting press – Very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR exchange rate (Prices may vary in case of significant fluctuations)

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Tjdpfsy Efbksx Ac Teb

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Tedpfx Aoy Ed S Isc Teb Autofocus height control system Hörbiger laser gas system 2 CCD cameras Teka extraction unit ECO-Cube

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets Tjdpfjx Hn D Rsx Ac Tsb - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: reconditioned (used), Year of construction: 2006, HT 690 MC PowerMill Multi-axis CNC turning / milling center with automatic tool change, Y-axis and B-axis for complete machining of turned and milled parts; Tjdpfx Acohlvgio Tob Max. Diameter approx. Over bed 700 mm Max. Turning diameter approx. 520 mm Distance between the spindles approx. 1500 mm Travels X-axis 490 mm Z-axis 1055 mm Y-axis 200 mm (+/- 100 mm) Drive power: Main spindle 54 kW (S6) Counter spindle 25 kW (S6) Speed range: Main spindle 0 - 3200 min-1 Counter spindle 0 - 3200 min-1 Main spindle: A2-8 (ASA 8 ") DIN 55026, Counter spindle: A2-8 (ASA 8 ") DIN 55026, Y-axis: travel range +/- 100mm PowerMill: A motorized milling spindle with 48-fold tool magazine is integrated into the upper slide system for machining inclined surfaces and bores. The swivel range of 210 ° can be steplessly traversed and interpolated. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology SINUMERIK 840D Contains: • Main spindle with clamping cylinder • Counter spindle (with clamping cylinder) • Milling spindle with Y and B axes • C-axis for main spindle and counter spindle • TRANSMIT software for simple C-axis programming • Kelvin cooling unit for headstocks, storage of main and counter spindle and milling spindle • Sinumerik 840D, electronic handwheel, RS 232 interface • Chip conveyor with an ejection height of 1100mm programmable (type hinge belt) • Coolant device integrated in the chip conveyor, HP pump with 14 bar • Feed rinsing device for both spindles • Control cabinet air conditioner • Programmable clamping pressure on main and counter spindle • Line filter • Hydraulic power pack • Machine light • Foot switch for chuck main and counter spindle • Documentation • Special accessories: • Automatic door • 48-fold tool magazine • Foot switch main and counter spindle

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Todezti Tkopfx Ac Teb Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 31-44336, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle has been completely overhauled! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Pallet size: 400 × 500 mm Number of pallets: 6 Pallet change time: 9 s Todpfezwd Htjx Ac Tob Max. workpiece size: 720 × 800 mm Max. workpiece weight: 500 kg NC rotary table: B-axis B-axis rotation range: 360,000 × 0.001° B-axis rotation speed: 40 rpm Tool holder: SK 63 Max. tool diameter: 150 mm Max. tool length: 227 mm Max. tool weight: 12 kg Spindle speed: 45–24,000 rpm Spindle torque: 48/72 Nm Spindle drive: 30 kW Feed rate X/Y/Z: 1–60,000 mm/min Rapid traverse X/Y/Z: 60,000 mm/min Feed force: 10,000 Nm MACHINE DETAILS Total connected load: approx. 60 kW Connection voltage: 400 V Mains frequency: 50 Hz Total weight: approx. 12,500 kg EQUIPMENT Chip conveyor Documentation/Manual

Condition: ready for operation (used), Year of construction: 2002, clamping force: 40,000 kN, screw diameter: 135 mm, injection weight: 7,837 g, controller manufacturer: KRAUSS MAFFEI, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details. KraussMaffei 4000-24500 MC • Clamping Force: 40,000 kN • Injection Volume: 10,735 cm³ • Shot Weight (PS): 7,837 g • Injection Pressure: 2,276 bar • Screw Diameter: 135 mm Tjdpozk E Thsfx Ac Tsb • Screw L/D Ratio: 23 • Nozzle Radius: 25 mm • Nozzle Shut-Off: Hydraulic • Nozzle Immersion Depth: 40 mm • Platen Size (H × V): 3,315 × 2,920 mm • Daylight Opening (H × V): 2,240 × 1,800 mm • Minimum Opening Stroke: 2,200 mm • Mold Installation Height: 1,100–2,000 mm • Maximum Opening Width: 4,200 mm • Centering Ring (Fixed Platen): 315 mm • Centering Ring (Moving Platen): 315 mm • Quick Mold Clamping System: QMC 101.450 • Hot Runner Control Zones: 48 • Pneumatic Cascade Control Circuits: 10 • Hydraulic Cascade Control Circuits: 12 • Core Pull Circuits (Fixed Platen): 3 • Core Pull Circuits (Moving Platen): 4 • Cooling Circuits (Fixed Platen): 18 • Cooling Circuits (Moving Platen): 18 • Temperature Control Units: 36 • Supply Voltage: 400 V • Power Supply: 3-Phase • Frequency: 50 Hz • Motor Current: 622 A • Heater Current: 583 A • Motor Fuse: 630 A • Heater Fuse: 630 A

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,960 h, load capacity: 1,800 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, power: 26 kW (35.35 HP), fork length: 1,200 mm, empty load weight: 3,562 kg, total length: 2,950 mm, drive type: Diesel, construction width: 1,450 mm, Rough-terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire condition: 60 - 80% Description: With the MC18, available with two-wheel or four-wheel drive, you can safely and precisely load goods on any terrain. The 30 cm ground clearance guarantees excellent climbing ability on your fields. Good all-round visibility and the compact and robust design ensure optimal safety during work. Discover the MC18, your new partner for increased productivity! This Manitou rough-terrain forklift is also available in two-wheel or four-wheel drive versions as MC 25-2 or MC25-4 or MC 30-2 or MC 30-4. Side shifter, 3rd valve, roof protection, windshield. Tjdpezrqqhsfx Ac Tsb

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 Tedjzxhxvepfx Ac Teb One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 590 h, load capacity: 3,000 kg, lifting height: 4,740 mm, free lift: 1,680 mm, fuel type: diesel, mast type: triplex, construction height: 2,440 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,085 mm, drive type: Diesel, construction width: 1,450 mm, Rough terrain forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Like new Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Tsdpfxoygn Etj Ac Tsb Rear tire condition: 80 - 100% Description: With the MC30, available with two-wheel or four-wheel drive, you can safely and precisely load cargo on any terrain. The 30 cm ground clearance guarantees excellent climbing ability in your fields. Good all-around visibility and the compact and robust design ensure optimal safety during work. Discover the MC30, your new partner for increased productivity! This Manitou rough terrain forklift is also available in the two-wheel or four-wheel drive versions as MC 25-2 or MC25-4 or MC 30-2 or MC 30-4. Side shifter, 3rd valve, 4th valve, full cab, Cab, heater, trailer hitch, rotating beacon, work lights, mirrors

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 280 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,440 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 3,562 kg, total length: 2,950 mm, drive type: Diesel, construction width: 1,450 mm, Rough-terrain forklift Load center: 500 Tsdpfeyf Rvrex Ac Tob ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: As new Technical condition: Very good Front tires type: Pneumatic Front tires size: SOLIDEAL - SL-R4 - 12.5/80 R18 PR12 Rear tires type: Pneumatic Rear tires size: CAMSO - ED PLUS - 7.00-12 R12 PR12 Description: With the MC25, available in two-wheel or four-wheel drive versions, you can safely and precisely handle loads on any terrain. Its 30 cm ground clearance ensures excellent climbing ability on your fields. The machine's good all-round visibility, along with its compact and robust design, ensure optimum safety at work. Discover the MC25 – your new partner for increased productivity! This Manitou rough-terrain forklift is available with two-wheel or four-wheel drive technology, also in the MC 25-2, MC 25-4, MC 30-2, or MC 30-4 models. Side shifter, 3rd valve, 4th valve, heater, full cabin, full free lift, interior mirror, joystick, beacon,

Condition: excellent (used), Year of construction: 2016, operating hours: 11,000 h, Ref: 11132 . 2016 Muller Martini Ventura MC 160 Latest Model, Fully Automatic Book Sewer capable of 160 cycles p/min Excellent condition - Only 11,000 hours worked! Equipped with: Touch Screen Commander control Tjdpszpv Efjfx Ac Teb ASIR III automatic signature control Servo drives 11 stitches / opening 2+2 Venturi jets Leaf chain for thin signatures Device for thread melting Belt delivery Features: Patented loop formation using blow air and an active thread cutting system Active thread divider system as standard - this is not part of the basic equipment of any other entry-level model in the market. It guarantees that threads are trimmed between the individual book blocks without tension. 1. The punch needles make the holes in the signature from below. 2. Sewing needles pull the thread through every other hole 3. Air blast blows the thread as a loop into the slotted lever 4. The hook needle grabs the loop. Then the hook needle and sewing needle pull the thread up simultaneously, creating the thread chain. Wide Range of Sizes: Designed for the most common size and fold types, it can process signatures ranging from; 120 to 425 mm in length and from 75 to 320 mm in width, and from four pages to 4 mm in thickness. User friendly: Job changes can be performed quickly and conveniently thanks to the display on the touch-screen with the proven job and setup wizard from Muller Martini. Uniform icons make it easier for machine operators to get an overview of the whole machine. With its quick job changeover times, the Ventura MC 160 is suitable for both short runs and industrial three-shift operations. Specification: Max signature length: 425mm Min signature length: 120mm Max signature width: 320mm Min signature width: 75mm Max thickness: 4mm Max. speed: 9,600/hour

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,100 h, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 1,210 mm, fuel type: diesel, mast type: triplex, construction height: 1,988 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,045 mm, drive type: Diesel, construction width: 1,450 mm, All-terrain forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Very good Front tires Type: Pneumatic Tedpfx Acezhp Ahj Tob Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: With the MC25, available as a two-wheel or all-wheel drive, you can load loads safely and precisely on any terrain. The 30 cm ground clearance guarantees excellent climbing ability on your fields. Good all-round visibility and the compact and robust design ensure optimum safety at work. Discover the MC25, your new partner for more productivity! This Manitou rough-terrain forklift is also available in two-wheel or four-wheel drive technology in the MC 25-2 or MC25-4 or MC 30-2 or MC 30-4 version. Sideshift, 3rd valve, rear working lights, front working lights, semi-cab, full free lift,

Year of construction: 2006, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, transport trailer, refuse transport trailer Tsdpsl Dvtksfx Ac Teb -Manufacturer: Franke, transport trailer low loader, refuse transport trailer type TA-MC -Platform: Length 2750 mm, dimensions see photos / technical drawing -Load capacity: 1200 kg -Maximum speed: 25 km/h -Number: 2 trailers available -Price: per piece -Transport dimensions: 5100/1735/H1740 mm -Empty weight: 840 kg/unit

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Tjdpfsw Tir Isx Ac Teb

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Tsdpfx Ajzpfg Ejc Tjb Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Machine will be in stock in 2 weeks

Condition: excellent (used), Year of construction: 2007, operating hours: 3,500 h, functionality: fully functional, turning length: 520 mm, turning diameter: 310 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, Equipment: documentation/manual, Available: End of October/Beginning of November CNC turning and milling center EMCO EMCOTURN 365 MC Operating hours: Machine on: 17,842 h Automatic operation: 8,374 h Net cutting time (production): Only 3,369 h! Manufacturer: EMCO Model: EMCOTURN 365 MC Year of manufacture: 2007 Control system: SIEMENS SINUMERIK 810D powerline Tjdpfozwx Hnjx Ac Teb Work area & travels: Travel distances: X = 210 mm | Z = 610 mm | C = 360° (0.001° resolution) Max. turning length (part length): 520 mm Max. turning diameter: ø 310 mm (turning across the bed: ø 600 mm) Max. bar diameter: ø 65 mm Spindle & tools: Main spindle: 60 – 4,200 min⁻¹ | 15/18 kW | 192 Nm | Spindle connection KK 6 Tool turret: 12-position VDI 30 axial turret Driven tools: Yes, on all 12 stations (milling/drilling) Accessories & peripherals: Automation: EMCO COMPACT LOAD E65 short bar loader Tailstock: Hydraulically actuated (500 mm travel, MK4) Chip conveyor Extras: Tool setting probe in the work area Package: Large set of chucks/collets and many VDI 30 holders (fixed and driven) - WITHOUT CABINET

Condition: new, Year of construction: 2024, 5 Axes FSCUT 3000S CNC Control System DELTA Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head HanLi Chiller SMC Proportional Valve. Dairuike Auto Pneumatic Clamp φ220mm Various Diameter Wheels Pneumatic Support Loading Assist System Tjdsnr Hghopfx Ac Tjb Gross weight around 5.5ton

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Todezmv Dvspfx Ac Tob Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.