Used Allgaier Allgaier Recycling Separation Screen for sale (10,097)

Year of construction: 2000, condition: new, Separation screen ALLGAIER ARSM 31-2, suitable for screening, separation, and recycling. Hnsdpjx Hh H Esfx Aagol

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Hodpfx Aajy N Rlvogonl The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: like new (used), Year of construction: 2022, operating hours: 1,335 h, functionality: fully functional, For municipal waste. Spliter 425 unit: Width 2500 mm. Length 4000 mm. 16 shafts. Acceleration belt 3100 mm. Positioned at 25 degrees. Width 1200 mm, effective 1050 mm. Speed from 1 to 2.5 m/s. Total consumption 11 kW. Approximate dimensions: 6685 x 2720 mm. Height 676 mm. Approximate weight 9 t. Hnsdpey Sgk Hofx Aagjl

Year of construction: 2025, operating hours: 1,050 h, condition: reconditioned (used), functionality: fully functional, Alzinger Lepton 5100 – Solution for the Bio-waste Ordinance (BioAbfV) Ideal for organic waste separation: Easily meet the statutory 1% threshold! From May 2025, organic waste may only be treated if the contaminant content is below 1.0% by weight. Our Lepton 5100 has been specifically designed for this requirement. Lepton 5100 Advantages: Separation instead of Shredding - Gentle Bag Opening: Waste bags are reliably opened without shredding the contents. A pre-shredder (slow-speed) is not required! - Maximum Film Size: Plastic films remain largely intact and are efficiently removed during the first screening process, before they can fragment in the compost windrow due to turning, heat, and UV exposure. - Highest Purity: Prevents microplastics in the process and ensures high end-product quality. Economic Efficiency: - Legal Compliance: Reliably stay below the 1% threshold required by the BioAbfV. - Process Optimization: Reduced effort in post-cleaning. - Cost Efficiency: Significant savings on diesel and wear costs since no pre-shredder is necessary. - Integrated Air Separator: No need for bulky auxiliary machines. Saves space and maintenance costs. Innovative Process (Flexibly Controllable): - Organic Waste Processing (2-fraction mode): Reversible mid-size discharge belt brings together medium and fine fractions for a homogeneous mix. Result: Clean target fraction for digestion/composting plus coarse fraction with films/contaminants. - Compost Refinement (3-fraction mode): Separation into premium compost, structural material, and energy wood. The ballistic separation effect removes stones, glass, and hard plastics via the stone fraction belt. Integrated air separators remove any remaining film residues. Current Application: Successful organic waste processing for wet digestion. The machine delivers a contaminant-free, homogeneous fraction for the fermenter, preventing the formation of sink or floating layers. Inspection & Demonstration: Live demonstration available at our partner facility in the Kelheim district. Processing steps can be discussed directly with the plant operator. Technical Data: Hnsdpfxoy Elwfo Aagsl - Model: Lepton 5100 | Year of manufacture: 2025 | Approx. 1,050 operating hours - Location: D-84069 Schierling | Availability: Short notice - Screen Decks: Deck 1 (52mm), Deck 2 (43mm) - Equipment: Variable dosing roller, volume measurement, air separator preparation, compressor, LED lighting package, radio remote control. - Drive: Diesel-electric (Perkins 58kW, no AdBlue) + external power supply option (400V 63A). - Transport Dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). - Screening Materials: Compost, green waste, biomass, wood, municipal waste, RDF. - Condition: Very good, fully operational. The machine will be completely overhauled by us before sale.

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Hodsyi Ex Nspfx Aagonl

Condition: excellent (used), functionality: fully functional, Trendelkamp Separation Table / Vibrating Sieve Machine – 3 Fractions For sale is a Trendelkamp separation table, model TK-K60/85, weight 200 kg. This machine is designed for the precise separation of bulk materials into three fractions by means of vibration and screening. Hnedpow Ip Dtefx Aagol Technical data: • Manufacturer: Trendelkamp Stahl- und Maschinenbau GmbH + Co. KG • Model: TK-K60/85 • Weight: approx. 200 kg • 3-fraction separation • Driven by electric motor with unbalance drive • Robust steel construction, screen decks made of stainless steel • Screens can be easily replaced upon request (different mesh sizes available) Areas of application: Ideal for plastic granulate, recycling materials, pellets, bulk materials, and other applications requiring separation into three size classes. The machine is immediately ready for use and in good condition.

Year of construction: 1993, condition: new, functionality: fully functional, Allgaier TSM1600-2 Screening Machine / Trommel Screen Year of manufacture: 1993 Motor: 2.2 kW Hnodpfsxu Ifuex Aagsl Including screen decks of 4.00 mm and 1.00 mm

Year of construction: 2022, operating hours: 2,896 h, condition: reconditioned (used), functionality: fully functional, Model: Lepton 2100 Year of Manufacture: 2022 Screening Hours: approx. 2896 hrs Engine Hours: approx. 3486 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 2100 with Screen Deck 1 (optionally upgradable to a second screen deck) Screen Deck 1 spacing: 70 mm - Tracked undercarriage Hsdpfx Ajwlt N Noagjnl - Pre-screen deck with long hopper and accelerator belt - Radio remote control for all key adjustments - Diesel-electric drive 80 kW - Level compensation - 18,500 kg total weight - Transport dimensions: 11.97 m overall length, 4.10 m height, 2.53 m width Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recycling materials (not suitable for construction debris or excavated earth) Other: Very good used condition, fully operational

Year of construction: 2008, condition: used, machine/vehicle number: 51E361-010-02, IFE Processing Technology Hodpfjxztbhjx Aagonl Year of manufacture: 2008 For sale: 2 identical screens, each equipped with 2 unbalance motors. The price is for 1 screen.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Hedpfx Ajxy Rddoagjnl

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Hodpfx Aasxy Iikjgsnl Available immediately

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Hnodpjy Dtyrjfx Aagsl

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors. Hjdpfx Aovf E Avsagjnl

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hodpfxjviwdme Aagenl Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, JMC 200 B Immediat delivery from our possible. Fully serviced. New condition Hsdpjin N Tdjfx Aagonl McIntyre’s wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it.

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press Hsdpfoyxda Sex Aagsnl -Manufacturer: Allgaier, manual spindle press -Pressure capacity: approx. 20 tons -Insertion height: 345 mm -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 600 HD available immediately Serialnumber 965 Special price from our stock 06188 Landsberg, Germany The 600HD alligator shear is a fast and strong metal cutting shear with an extended hold down clamp, making it ideal for every cutting and cleaning task whether cable, plastic sections or window frames. Its cutting capacity is up to 63mm, 2″ inch mild steel round bar. The 600HD alligator shear is probably best known for dealing with car radiators. It was designed and built following requests from customers who were looking for a shear with a longer blade to cut larger items such as car radiators which it cuts through in one pass. The automatic hold down clamp holds material in place during the cutting cycle and prevents kick back which speeds up processing and improves operator safety. As with all McIntyre shears, opening and closing the jaws is controlled from a moveable foot pedal. As soon as the foot pedal is released, the cutting blades return to the open position. However, a continuous cutting action can be achieved by keeping foot pressure on the pedal. Hsdpfoib Ircex Aagenl The 600HD can be supplied with an electric motor or with a 2-cylinder diesel engine.

Condition: used, functionality: fully functional, machine/vehicle number: EPS-045-HH2, The briquetting plant was used for compacting Styrofoam. Hjdpfxey R Ua Ho Aagsnl

Condition: used, Year of construction: 2018, only approx.16K plates done Hjdpfx Aasyt I Unegonl Format 830 x 660 mm Apogee Workflow RIP Inlinepunch Azura C95 Clean out unit Stacker ST 95EX Available: at short term

Condition: excellent (used), Year of construction: 2011, Plate trolley for SCL (100 plates) - Screen 4000x - Agfa Hedpfxey Rh Rls Aagonl - Fuji

Year of construction: 2026, condition: new, original Screen laser diodes 100212447V01 Diode fiber 500 mW Hnjdpfedmdvvex Aagel for Screen PT-R8600 & OEM (64 channel) new & second-hand All offers subject to prior sale

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Hnodpfet Iwt Uex Aagol reactions or questions ? please with full name, company name and phone number.

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver the machines where you want them, install them if you wish by mutual agreement. Optional: stainless steel drain element, stainless steel storage silo, blower, pipes approx 3 meters. Grinder 800 series 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators screen deck your request With Variablele Frequency controller, Optional Product discharge and storage in various options in combination extra favorably priced Motor power adaptable. Hedpet Iw Huofx Aagenl Other adjustments can be discussed such as a rotor adjustment, more blades e.g. 5 rows of blades or heavy duty version. Delivery / time in consultation. Call or email us for consultation or if you have questions, please respond with your name, company name, and correct phone number. Without these correct details RSS Recycling Shredders and Solutions (Netherlands) cannot respond.

Condition: new, functionality: fully functional, Year of construction: 2026, RSS 600 series Mono Rotor Shredder new model 2026 Hsdpfx Aaeirt H Aegonl 18.5kw Screen size in consultation Motor cover, pusherbox guide strips, PLC controlled. Conveyor and/or discharge screw is optional available. suitable for various types of plastic/wood/or other material Delivery in consultation Larger or smaller models also available. Intrested ?, reactions with your name, company name and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver machines at any place, install when you whish and support you along the way, at any time. Grinder 1000 series 45kW 3 x 2 knife set 2 x stators screen your request Hodpfxog Ainqo Aagonl Product discharge and storage in various options. Other adjustments negotiable. Delivery in consultation. Call or email us for consultation or if you have any questions, important! name company name and telephone number.