Used Virtek Laserqc Lps-1Ds for sale (196)

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Model: Sprint International Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. Blsdpfxsy Au Ube Ac Tel All components are complete.

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Blsdpfx Aovgurcjc Tol Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: new, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] - Power: 11 [KW] ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), main motor and feed with a PLC programmable Siemens S7-1500 DOCUMENTATION: CE certification with manuals Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC Bljdpfx Aceq Nzl Tj Tel 2O14I68IUE STANDARD

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Holac Cubixx LP 120 Dicer / slicer including Holac GFA-5-4000 conveyor belt specialy made for hot products up to 90 degrees. Blodpfx Aoxwb Dcsc Tol Year of construction 2017 very little used and low running hours!

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Bedpfsx Ta Nxex Ac Tsll Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Condition: as good as new (ex-display), functionality: fully functional, type of input current: three-phase, total width: 770 mm, total length: 1,030 mm, total height: 1,100 mm, input voltage: 400 V, saw blade diameter: 700 mm, working height: 700 mm, overall weight: 93 kg, Description: • Enclosed and secure saw area for increased safety, complying with legally mandated saw blade guard • Anti-twist device for logs thanks to punched-in retaining claws in the rocking table • Stable, torsion-resistant steel frame • Transport wheels for easy mobility • Impact, scratch, and weather resistant due to high-quality powder coating • Phase inverter Bjdpfx Acsyddm Us Toll Technical Data: Dimensions and Weight: Length (product) approx.: 1030 mm Width/Depth (product) approx.: 770 mm Height (product) approx.: 1095 mm Net Weight approx.: 92.5 kg Working height: 700 mm Rocking table support: 740 mm Drive: Drive type: Electric motor with direct drive Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Output power: 3.835 kW Input power: 5 kW Noise emission: Sound pressure level Lp: 101 dB(A) Sound power level Lw: 115 dB(A) Saw blade: Saw blade circumferential speed: 51.3 m/s Saw blade diameter: 700 mm Cutting capacity: Max. cutting capacity, rocking table round timber: 250 mm Scope of delivery: 1 x carbide-tipped saw blade Ø 700 mm

Condition: used, Year of construction: 2018, machine/vehicle number: M221, Used Filling Monoblock Alfatek Easy Compact 2018Used Filling Monoblock Alfatek Easy Compact 2018MONOBLOCK Mod. ROBOT COMPACT 7/1Machine suitable for treating refermented beer in the bottle. Machine suitable for treating Steinie Flasche 0.33 I bottles Height 174mm — diameter 70mmComposition:• Elvira LP Series filler with 7 filling valves • Single-head crown capper Mod. “Eagle/C”Max. production: 500/1000 bph with 330 cc bottles and product without foam. Production may vary according to the type of product to be bottled.Power supply: 380V three-phase * N — 50hz • Electrical panel position: Right • Control panel nameplate language: Italian Worktop: 1000 + -50 • Bottle entry and exit: on the rightBottle size:• Height: from 174 to 310 rams. Diameter: 58 to 110mm. • Bottle neck diameter: from 16 mm (int.) to 30 mm (ext.) Level variation in the bottle: from 40 min to 75 mm Bottle neck height: H. level + 30 minThe Used Filling Monoblock Alfatek Easy Compact can only be unloaded with a forklift of adequate capacity and forks of no less than 1,400 mm in length. Bedjvgukrepfx Ac Toll Complete with safety guards in accordance with CE standards.ACCESSORIES INCLUDED IN THE PRICE:CE-rated safety guards; Equipment for n. 1 cylindrical bottle format; Towing head. return head, bottle arrival table.

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Bedpfx Aeyl U Sqec Tjll Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-201-76-6720, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 270 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BMG311 VENTURE316XXL 6m machine 10 consoles 6 stops at the rear 6 stops at the front Vacuum system 2 x 90/108 m³/h (50/60 Hz) LED position display system 5-axis main spindle 10 kW Drive5C Programming 5-axis spindle with WoodWop 18-position disc changer below Drilling head with 21 spindles: V17/H4/S0/90° Safety barrier on the left Viewing element barrier on the right VENT.+BMG+B200/300 Chip conveyor on the right PowerClamp pneumatic package for K+AP table Performance pack for Drive5C 9-position linear changer for BMG311 without FLEX5 Measuring probe for tool changer Bedpfx Acexw H Tco Tell Visualization of vibrations on machining spindle collisionControl Barcode reader package VENTURE for 1D codes HOMAG GROUP control system PowerTouch WoodWop CAD plugin WoodWop CAM plugin Professional Machine WoodMotion

Condition: used, functionality: fully functional, Reportedly very little used IMA model TR 135 medium speed blister packaging machine. - Manufacturer: IMA - Model: TR 135 - Forming capacity: max 90 cycles/min - Cutting capacity: max 230 cycles/min Bljdpfoy Slchox Ac Tel - Control system: Color touch screen - Feeding system: Pre-feeder hopper with capacity 45 litre + bowl with vibrator - Power supply: 400 V, 50 Hz (max power 12 kW, average power 7 kW) - Air supply: 700 Nl/min, 6 - 8.5 bar - Cooling device: Chiller Euro cold ACW-LP 16T Blisters: - Blister: PVC/ALU blisters. - Size range: Width 30 - 88 mm x Lenght 60 - 135 mm x Thickness 3 - 12 mm - Available parts: Possible to supply with IMA A83 horizontal cartoning machine

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Bsdpfx Acsyidvdj Tjll Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) Blodjy D Hy Eepfx Ac Tjl • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, Technical parameters: • Manufacturer: Nouvo Pignone • Type: ENK 32/45 (1999) extraction-condensing turbine • Nominal output of steam turbine set MWe: 10.2 • Maximum output of steam turbine set MWe: 11.2 • Number of casings: pcs: 1 Bodpfx Aey Drbujc Tsll • Live steam parameters: bar/°C: 40 / 420 • LP steam parameters: bar/°C: 4.0 / 180 • Live steam flow: t/h: 40.8 • IP steam flow: t/h: 15.5 • Pressure in the condenser: bar: 0.14 • Operating hours: 76,000 hours Without control and protection system!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Bedpfx Aey Evirec Tell Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: excellent (used), functionality: fully functional, Complete Industrial Ammonia Refrigeration System (R717) A complete refrigeration system based on ammonia (R717) refrigerant, designed for industrial applications in food processing plants, cold stores, freezing facilities, and high-performance process installations. The installation includes compressor units, pressure vessels, heat exchangers, circulation pumps, and control panels. Main system components: Ammonia separator vessel Manufacturer: Retech Refrigeration Technologies A/S Type: PSH-0820 Number: 346601 Year of manufacture: 1994 Capacity: 1,092 l Design pressure: -1 / +22 bar Test pressure: 29 bar Refrigerant: R717 Equipment: 2 ammonia pumps Dimensions: 2,700 × 1,300 × 2,400 mm Condenser / Heat exchanger (Shell & Tube Condenser) Manufacturer: Sabroe Refrigeration Type: COSB 411904 Year of manufacture: 1994 Refrigerant: R717 Capacity: 134 / 61.9 l Dimensions: 2,500 × 800 × 2,300 mm Pressure vessel Manufacturer: Tortmans Capacity: 80 l Refrigerant: R717 Dimensions: 1,300 × 500 × 1,400 mm Intermediate cooler Manufacturer: Sabroe Refrigeration Type: DVEA 051411 Serial number: 92578 Year of manufacture: 1994 Max. working pressure: 26 bar Capacity: 340 / 10 l Refrigerant: R717 Dimensions: 1,000 × 800 × 2,300 mm Compressor unit (Sabroe skid): 2 × single-stage reciprocating compressor Sabroe Type: CMO 28 Serial numbers: 99008 / 99007 Year of manufacture: 1994 Capacity: 2 × 190 m³/h Pressure: 20 bar Refrigerant: R717 Sabroe separator Type: GHEA 0520 Serial number: 92419 Year of manufacture: 1994 Capacity: 600 l Alfa Laval heat exchangers: • M10-BWFDT – 37.2 l (year 1993) • M10-BWFGT – 67.4 l (year 1994) Overall skid dimensions: 3,700 × 2,500 × 2,050 mm Additional heat exchanger: Manufacturer: Alfa Laval Type: M10-BWFD Factory number: 30101-12952 Year of manufacture: 1995 Capacity: 104.0 l Design pressure: 25 bar Design temperature: 110°C Dimensions: 1,700 × 500 × 1,000 mm Grundfos circulation pumps (set): LP 80-125/124 – 50 m³/h (several units) LP 100-125/130 – 85 m³/h (2 units) LP 65-125/117 – 42 m³/h UPS 50-120 F – 3 × 400–415 V, 50 Hz Two-stage compressor: Manufacturer: Sabroe Refrigeration Type: TSMC 108 L Serial number: 99112 Year of manufacture: 1994 Bedpfeydqpvox Ac Tell Refrigerant: R717 Capacity: LP – 276 m³/h Pressure: 18 bar Dimensions: 2,200 × 1,100 × 1,550 mm Control panels (3 units): 2 × panel with Siemens touchscreen – 1,200 × 500 × 2,200 mm Sabroe ammonia plant control cabinet – 2,000 × 500 × 2,300 mm Auxiliary cabinet – 800 × 300 × 800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, LP-UP 3000 – Intelligent Automation System for Drilling and Double-Sided Edge Banding Machines The LP-UP 3000 is a high-speed intelligent automation system designed to automate panel loading, unloading, and material handling for drilling machines and double-sided edge banding lines. Its flexible design allows it to be integrated with machines from virtually any manufacturer, making it suitable for both new production lines and existing machinery. The system automatically transfers and positions panels, reducing manual handling, operator requirements, and production waiting times. With a processing capacity of up to 20 panels per minute, the LP-UP 3000 provides a continuous and highly efficient production flow. It is an ideal solution for furniture and panel-processing manufacturers looking to increase productivity, reduce labor dependency, and automate their production lines. Main Features: * Compatible with drilling and double-sided edge banding machines * Can be integrated with virtually all machine brands * Automatic panel loading, unloading, and transfer * Intelligent and flexible production control * Reduces manual handling and operator requirements * Suitable for integration into existing production lines Blodpfszp N Uaox Ac Tsl * Increases production speed, consistency, and overall efficiency

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 102920, Technical Characteristics: Work Area - Maximum diameter of clamping plate: 250 mm - Maximum turning diameter: 270 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 175 mm - X-axis travel: 660 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 300 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80...200 mm), 18/(30...160 mm), 30/(30...85 mm)) Main Spindle - Spindle according to DIN 55026: Size 6 - Max. speed: 4,500 rpm Blodexxiwyspfx Ac Tjl - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Turret with Driven Tools - Tool holders per DIN 69880: 12 x VDI40 - Number of positions: 12 - Max. tool length (including holder): 190 mm - Max. speed: 6,000 rpm - Max. torque at 10% duty cycle: 37 Nm, at 25%: 26 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400 V - Connected load: 36 kW / 80 A Dimensions - Total dimensions: Length: 3,120 mm (4,185 mm with chip conveyor), Width: 2,266 mm, Height: 3,200 mm - Weight: 7,500 kg Main Features and Capabilities: - Vertical design: Enables optimal chip evacuation as well as easy loading and unloading - Control: Siemens 840D - High precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm, Heidenhain linear scales - Main spindle: High power and broad speed range - Automated loading/unloading: Automated workpiece loading and removal via integrated system - Driven (live) tools: Supports live tooling for extended machining range, including drilling and milling - Part detection sensor with compressed air gauge through spindle: SMW Autoblock Linear Position Sensor LPS-X - In-process control: Marposs T25 - Chip conveyor - Coolant chiller: Texa TCW55PMSBXMF000, max. 30 bar input - Coolant filtration with paper belt filter: Micron filter EVO500Pro+KMT150, 550 liters, 80 l/min - Documentation: Digital & hard copy manuals available Machine Status: NOT WORKING - Lifetool motor - Slideways & carriages (X & Z axes) - Hydraulic pressure compensation block

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 102821, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 250 mm - Maximum turning diameter: 270 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 175 mm - X-axis travel: 660 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 300 mm / Rapid traverse in Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Toolholders, cylindrical shank DIN 69880: 12x VDI40 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25%: 26 Nm, 100%: 14 Nm Electrical Equipment - Operating voltage: 400 V - Connected load: 36 kW / 80 A Dimensions - Dimensions (L x W x H): 3,120 mm (4,185 mm with chip conveyor) x 2,266 mm x 3,200 mm - Weight: 7,500 kg Main Features and Capabilities: - Vertical design for optimal chip removal and easy access for loading/unloading - CNC control: GE Fanuc Series 32i Model A - High precision with X, Z, and Y axis positioning accuracy ±0.001 mm (Heidenhain linear scales) - Powerful main spindle with wide speed range - Integrated automation for part loading/unloading - Driven tools available for both milling and drilling operations Blodexxikgopfx Ac Tel - Workpiece detection sensor with compressed air gauge through spindle: SMW Autoblock Linear Position Sensor LPS-X - In-process gauging: Marposs T25 - Chip conveyor included - Documentation: Complete, both electronic and paper versions Machine status: IN OPERATION

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, Equipment: CE marking, type plate available, Heidelberg Diana 90 AUTOSET – Refurbished Folder Gluer / Folding Carton Gluing Machine ✅ Condition: Fully refurbished in 2024 (complete mechanical and electrical overhaul, new motors, shafts, rollers, and control electronics) ✅ Functions: Straight-line, crash-lock bottom, 4-corner box gluing ✅ Speed: up to 500 m/min ✅ Formats: Diana 45 → 48–570 mm | Diana 90 → 48–900 mm ✅ Automation: Motorized carriers, AUTOSET feature, touchscreen operation ⚙️ Advanced Features - Precision aligning module for perfect folding - Feeder and transfer sections equipped with independent drive motors - Pneumatically lifted feeder top for easy access - LPS Clamping System for rapid module setup - Glue system with LPS GP AUTO (maintains glue freshness during stops) - Drive system: IE3 motors, ABB frequency inverters, Siemens PLC control - Final fold station design inspired by Bobst Alpina 🚀 Why choose LPS Diana? ✔️ High efficiency – quick job changeovers with Autoset ✔️ Versatile – accommodates a wide range of carton types ✔️ Premium build – robust frame for stability and vibration-free operation ✔️ Remote diagnostics and service capability 🏭 Additional Machines Available from Stock We are a company specializing in full mechanical and electrical refurbishment of folder gluers (Heidelberg Diana, Bobst Alpina). We deliver machines with new modules, including our proprietary semi pick-up delivery table system. Currently available refurbished folder gluers, nearly ready for delivery: - Diana 90 Crashlock 4/6 Corner – €120,000 - Diana 90 – €100,000 - Diana 45 – €100,000 👉 All machines are fully rebuilt and include: - New shafts and bearings - New electrical cabinets with ABB and Siemens components - Comprehensive mechanical and electrical overhaul Prices are negotiable depending on configuration and customer requirements. Bsdpfx Asvy Efysc Tjll

Condition: used, Year of construction: 2022, operating hours: 12,345 h, functionality: fully functional, machine/vehicle number: 2211006105620961, cooling capacity: 148.1 kW (201.36 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,760 kg, ambient temperature (max.): 48 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 45 bar, temperature: 7 °C, volume flow: 25.5 m³/h, total width: 1,100 mm, total length: 4,330 mm, total height: 1,875 mm, power: 52.6 kW (71.52 HP), input current: 191 A, operating pressure: 45 bar, noise level: 53 dB, empty load weight: 1,760 kg, Equipment: cooling unit, type plate available, AERMEC NRK0700 H A 01 industrial air-to-water heat pump / reversible chiller. Quantity available: 2 units. Year of manufacture: 2022. Condition: used, dismantled / disconnected, available immediately. Location: Latvia. Technical data: Cooling capacity: 148.1 kW Heating capacity: 174.4 kW Refrigerant: R410A Power supply: 400V / 3Ph / 50Hz Input current according to nameplate: 191 A Starting current according to nameplate: approx. 282 A Max pressure HP/LP: 45 / 30 bar Water flow rate: approx. 25.5 m³/h Sound pressure level: 53 dB(A) at 10 m Protection class: IPX4 Dimensions: 4330 x 1100 x 1875 mm Bsdpfx Acey Ndqle Toll Approx. empty weight: 1760 kg Hydronic kit: 01 – storage tank with low head pump The units can be sold together or separately. Inspection is possible by prior agreement. Loading can be arranged.

Condition: good (used), Year of construction: 2008, Bizerba LP Flowpack is a compact packaging machine designed for efficient flow-wrapping of various food products. It has a space-saving design, making it suitable for smaller operations or areas with limited space, while still offering high performance. It uses flowpack technology to wrap products in a sealed, protective film, ensuring extended shelf life and maintaining product freshness. This machine can handle a wide range of products, including meat, cheese, baked goods, and other food items, making it adaptable to different packaging needs. Bjdpfoumlhwsx Ac Tsll It can be integrated with slicing, weighing, labeling, or other processing systems, enhancing efficiency in a full production line setup. Dimensions: 100 z 500 x H 500mm