Used Special Edge Sander for sale (12,075)

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel Lredpfoy At T Asx Ad Ask - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic oscillation of sanding belts - Infinitely variable feed speed regulation - Feed motor: 0.55 kW - Main motors: 2 x 4 kW - Air requirement: 6-8 bar - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. working width: 1100mm - Max. working height: 170mm - 2 units: - Rubber pressure roller 1) Grooved metal calibration roller - Rubber pressure roller 2) Grooved rubber roller + sanding pad + metal roller - Rubber pressure roller - Motor power of unit I and II: 11kW - From below: - 3 metal sliding rollers - Conveyor belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Operating pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg ADVANTAGES – Not repainted – Italian manufacture – 2 operating units – DTR documentation – Used sander, in very good condition Lrodjx S Eb Ropfx Ad Aok Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may change with higher exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush Lodpfx Adoyh H Aqj Aerk – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: excellent (used), CATALOG NO. 7728 Ledpfx Asya Hmvsd Aerk TECHNICAL DATA - Workpiece length: 2800mm - Workpiece width: 1250mm - Main motor: 5.5kW - Sanding belt width: 150mm - Belt air cleaning - Pneumatic hold-down - Right/left rotation - Electric table height adjustment up/down - Extraction port diameter: 180mm - Overall dimensions (L/W/H): 3950x1500x1450mm - Weight: approx. 700kg ADVANTAGES – Unpainted – Electric table adjustment – Belt air cleaning – Pneumatic hold-down – Used sander, in very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth Lredpfxjyz Rf Hs Ad Aek 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: Ljdpfxjyi Tq Ho Ad Aerk - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7717 TECHNICAL DATA - Workpiece length: 2780mm - Workpiece width: 800mm - Main motor: 4.2kW - Grinding belt width: 150mm Lsdsytdgtopfx Ad Asrk - Right/left rotation - Electric table height adjustment (up/down) - Extraction nozzle diameter: 180mm - Overall dimensions (L/W/H): 4000x1520x1540mm - Weight: 637kg ADVANTAGES – Not repainted – Electric table adjustment – Used sander, in very good condition Net price: 9500 PLN Net price: 2260 euros depending on the exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7818 Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers Lsdjyyygdopfx Ad Aork - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement Lrodpfx Adeyh H A Ds Ask - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen Lodex Rqr Sjpfx Ad Asrk - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW Lredpfxsyz Rtqo Ad Aok - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm Lredpoyg Ecvofx Ad Ajk - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt Lsdpsy Ddp Dsfx Ad Aork - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: used, mileage: 27,293 km, power: 191 kW (259.69 HP), first registration: 01/1998, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 1998, Equipment: ABS, compressor, MAN LE 18.264 Silent with telescopic articulated mast aerial appliance / aerial work platform Ziegler Bronto Skylift F32 MDT 2000 - immediately operational condition with valid 10-year inspection until 2027 ---- Equipment basic vehicle: * Suspension type leaf/leaf * Wheelbase 4325 mm * Permissible total weight 18 t * Gearbox EATON * Fuel tank 170l right * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length cab * Driver's comfort seat with lumbar support - make GRAMMER * Passenger seat make GRAMMER * Exhaust tailpipe for fire department * Engine brake * Anti-lock braking system (ABS) * Traction control system * Disc brakes for front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right + wide window in the center * Heated rearview mirrors * Wide-angle mirror right * Kerb mirror right * Rotating blue lights Equipment telescopic articulated mast aerial appliance / aerial work platform: * Body: Ziegler Bronto Skylift F32 MDT 2000 with rescue basket (max. working height 32m) Max. outreach angle: 75 degrees, basket load: 270 kg, nominal rescue height: 25m, nominal outreach: 12m, outrigger: horizontal-vertical * Maximum horizontal reach 17m * Operation possible in underfloor area * Suspension device for pulley under basket * Crane eye on main boom with 2000KG payload * Horizontal-vertical outrigger * Maximum total outrigger width 6.10 m * Access ladder * Fixed extinguishing water pipe * Power supply in the basket 400 V / 230 V * Surrounding area lighting * Firefighting water inlet 2x B Storz * Rotatable basket 45 degrees left/right * Foldable rescue platform on the basket with handrail 1.7m x 0.5m * Water monitor at the basket control station with 2300 liters per minute * Stretcher holder * 3 entrances in the basket Lrjdpfx Astqz E Dod Aok * 4 equipment compartments in the platform * 10-year inspection performed 07/2017, valid until 07/2027 * Complete service booklet available, all maintenance carried out annually ----Immediately operational non-smoking vehicle in well-maintained condition! Complete documentation and service history available Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: also Whatsapp Email: Subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 1992, Wide Belt Sander VIET Target 211 B Calibration and fine sanding machine with 2 sanding units and a single motor, sanding from above Lodoy Exhwopfx Ad Aerk Working width: 1100 mm Abrasive belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 - 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st unit: Sanding roller, rubber-coated, 90 Shore 2nd unit: Pad sander, rigid & air-cushion sanding pad, timer-controlled Compressed air requirement: approx. 6 bar Extraction diameter: 2 x 150 mm Approximate dimensions (L x W x H): 1700 x 1750 x 1800 mm Weight: approx. 1400 kg Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Abrasive belt oscillation Abrasive belt (EMERGENCY) stop with disc brakes Table extensions with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 new graphite pad inserts NEW bearings for the deflection rollers NEW V-belts for the drive motor Note regarding used machines: • Technical details subject to error and prior sale. • Prices are ex-works - free loading at site. • Machine has been cleaned and function-tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are welcome to inspect machines on site. • Special agreements valid only in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), machine/vehicle number: XLER6X20005161008, mileage: 1,450,349 km, power: 368 kW (500.34 HP), first registration: 12/2006, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,460 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 9,270 mm, total width: 2,550 mm, Year of construction: 2006, Equipment: retarder, = Additional options and accessories = - Intarder = More information = General information Cab: single Registration number: BS-NS-27 Technical information Number of cylinders: 8 Engine capacity: 15.607 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Lift axle Weights Empty weight: 13.365 kg Carrying capacity: 14.920 kg GVW: 28.000 kg Max. towing weight: 50.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Lredpfx Adsywynve Aek Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17000-21007552412, input voltage: 230 V, laser power: 30 W, Only 2 years of test operation – climate-controlled residential environment – no exposure to dust or workshop conditions The Epilog Fusion Edge 12 on offer is a professional CO₂ laser system designed for precise engraving and cutting applications in continuous operation. This unit was used exclusively for testing and development purposes over a period of just two years and was always located in a climate-controlled residential space. It has never been in a workshop environment, nor exposed to dust, thermal stress, or dirt, resulting in an almost factory-new condition. The machine has been maintained regularly by cameo Laser and is ready for immediate use. Inspection and a full functionality test are available at any time. Technical Specifications: - Model: Epilog Fusion Edge 12 - Laser Source: 30 W CO₂ "WaveGuide" - Working Area: 610 × 305 mm - Maximum Engraving Speed: 3 m/s (5G) - Maximum Material Height: 178 mm - IRIS™ Camera Positioning System - Autofocus + 2" Focusing Lens - Red Pilot Laser - Honeycomb Cutting Table - LED Interior Lighting - Large Safety Glass Viewing Window - Air Assist incl. Compressor - Laser Class: 2 - Connections: USB, Ethernet, Wi-Fi - Touchscreen + Joystick Control - 1 GB Internal Memory - SAFEGUARD Mechanical Protection - Mobile thanks to integrated castors Lsdpfxjyqxngj Ad Ajrk Vacuum Extraction System vacuair UML 340 edge (included) Recirculating Air Base Unit: - 3-stage filtration (HEPA H14, pre-filter, 15 kg activated carbon) - Airflow: 340 m³/h - Separation Efficiency: >99% - Serial Number: 50138217001 - Very quiet operation – ideal for indoor spaces Accessories & Documentation: - Air Assist Compressor - Camera Calibration Plate - Cleaning and Maintenance Accessories - Fusion Edge Software (CD) - Printed User Manual - Original Invoice (Initial value: €22,105.98) Condition & Usage History: - Only 2 years of test operation - Used exclusively in a climate-controlled residential environment - No exposure to dust, dirt, or workshop conditions - Very low operating hours - Regularly serviced - Excellent optical and technical condition, almost as new - Ready for immediate use

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Ledpfx Asyyrhaod Aerk Speed: 8000 rpm Tool magazine for 24 tools, SK 40 DCF software

Condition: new, for working length: 1000 mm Total height: 145 mm weight: Lrsdpoc H Tngofx Ad Ask

Year of construction: 1990, condition: used, edge heights: 10 - 60 mm edge band material thickness: 0,4 - 25 mm electr. connection: 380 V, approx. 9,9 kW space needed: 2900 x 870 x 1320 mm Lodpfs T T Ddox Ad Aork weight: 780 kg

Condition: used, Length: 355 mm Ljdpfjb N Nd Iox Ad Aerk Weight: 98 kg

Condition: used, mileage: 219,715 km, power: 206 kW (280.08 HP), first registration: 06/2019, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x2, wheelbase: 5,175 mm, color: white, driver cabin: other, gearing type: automatic, suspension: steel-air, number of seats: 3, loading space volume: 45 m³, loading space length: 7,340 mm, loading space width: 2,496 mm, loading space height: 2,457 mm, Equipment: ABS, air conditioning, cruise control, low noise, traction control, trailer coupling, Gross permitted weight: 14,000 kg, Cargo area dimensions (L x W x H): 7,340 mm x 2,496 mm x 2,457 mm, Cargo area volume: 45 m³, Fabric seats, Pneumatic leaf spring suspension, Digital tachograph, Low noise level: CEE 92/97, Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Comfort driver's seat, Pneumatic driver's seat, Driver's armrest, Passenger bench for 2 people, Radio/CD, Multifunction display, Bluetooth mobile phone preparation, Lane keeping assist, Multifunction steering wheel, Electric windows, Roof spoiler, Electrically adjustable and heated mirrors, Immobilizer, Central locking with remote control, Front underrun protection bar, Twin rear tires, Spare wheel, LED daytime running lights, 1x15 pin plug connection, Speed limiter, Voltage converter, Emergency brake assist, Anti-spray, CURTAIN-SIDER BODY WITH TILTING SIDE PANEL 1,500 KG, AIR CONDITIONER, RADIO. Lrodpfx Asy Elamsd Ajk

Year of construction: 1999, condition: ready for operation (used), A molded part press Italpresse for the woodworking and furniture industry is available. Motor power: 160hp, Press force: approx. 160t, Cylinders: 2, Weight: approx. 17600kg. An on-site inspection is possible. Lodpfx Ajy Ant Dod Aerk

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch Ledpfxjy A I Sgs Ad Asrk - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, mileage: 549,975 km, power: 520 kW (707.00 HP), first registration: 01/2016, fuel type: diesel, empty load weight: 13,400 kg, maximum load weight: 26,600 kg, tire size: 385 / 65 R 22.5 / 5mm, axle configuration: 10x4, next inspection (TÜV): 02/2025, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total width: 25,500 mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 40,000 kg, Equipment: air conditioning,