Used Softing Can-Ac1-Pci/Hw V1.01 for sale (27,740)

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Nledpfx Aceykudde Ajg FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net Nlodpjx Af Rdefx Ac Aeg - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, total length: 8,228 mm, total width: 3,077 mm, total height: 3,375 mm, Year of construction: 2026, Equipment: air conditioning, crane, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction Nledjzydk Ropfx Ac Aeg ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: ready for operation (used), Shredder for plastic 45kw power , can chop foil and other plastic into small chunks. The shredder has also soft start box. Njdpfxoxf Txzj Ac Aolg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Number of filling heads: 3 Filling capacity: 25 cans/minute Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Nedezzmfaopfx Ac Aelg Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, input voltage: 400 V, Spiral Dough Mixer – Reliability, Efficiency, and Modern Technology Spiral mixers are essential machines in bakeries, pastry shops, and food processing operations. Each spiral dough mixer integrates advanced technology, straightforward operation, and robust construction. Professionals depend on our mixers for their reliable performance and seamless integration into production lines. High Dough Mixing Performance Nlodsx A S Rwspfx Ac Ajg Our spiral mixers process dough with a minimum water content of 40%. You can mix batches as small as 10% of the bowl’s total capacity. The spiral dough mixer efficiently kneads both soft and dense doughs, making it ideal for bakeries, food production facilities, and confectionery manufacturing. The fixed bowl spiral mixers are a preferred, reliable solution, delivering uniform results due to their stable, immobile mixing bowl design. Spiral Dough Mixer – Durable Construction and Customization Options The spiral mixer is constructed with a robust, powder-coated steel frame. For enhanced hygiene in food and bakery settings, optional stainless steel housing is available. Key components such as the bowl, spiral, dough scraper, and safety guard are crafted from acid-resistant stainless steel, providing long-lasting durability and facilitating easy cleaning after each batch. Spiral Dough Mixer with Modern Control System All spiral mixers are equipped with an intuitive control panel featuring dual-speed timer settings. The dough scraper is fitted with a sensor for continuous dough temperature monitoring during mixing. Accurate temperature control ensures consistent dough quality. For advanced operations, we offer models with digital touchscreen control panels, enabling recipe programming and repeatable results in large-scale production environments. Quiet and Reliable Mixing Operation Modern belt-driven transmissions ensure that each spiral dough mixer operates quietly and efficiently. This technology provides smooth, user-friendly operation and minimizes the risk of mechanical failure. Energy Efficiency and Power Supply A powerful two-speed motor simultaneously drives both the spiral arm and the bowl. Fixed bowl spiral mixers require a 400 V industrial power supply. Each unit includes manual override controls for emergencies, allowing uninterrupted production processes. Safety and CE Compliance All spiral mixers comply with CE safety standards for industrial food machines. Every component is engineered to prevent accidents and safeguard users during operation.

Condition: excellent (used), ABE CraftCan35 canning line for 330 and 440ml aluminium cans, with 5 fill heads, and the rinser/blower addition, and the modified inlet conveyor to accommodate a date coder print head. Upgrade of much of the tubing to standard metric versions (6mm) vs the default 1/4 fittings the line was built with. Walk round video available. Nodpfx Asyq Ezyjc Aslg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Own production smoke trolleys, Lithuania currently offers 4 complete sets of drying trolleys with trays available from stock. Were used as a demonstration model in the showroom. Can be sent one set at a time. New price 3500 EUR per set Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. Nljdpfxsrftxfs Ac Aog The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film Nlsdpfxjyktv Ss Ac Aog - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 11744, operating pressure: 200 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, The Kärcher Cold Water High-Pressure Cleaner HD 9/20-4 SXA Plus is a showroom unit in like-new condition. Description The cold water high-pressure cleaner HD 9/20-4 SXA Plus enables ergonomic operation thanks to the EASY!Force Advanced high-pressure gun, which requires no holding force. Pressure and water volume can be adjusted directly at the gun/lance using the Servo-Control regulator; the stainless steel lance (1050 mm) is rotatable. The Vibrasoft rotary nozzle reduces noise and vibration by up to 30 percent. The cleaner impresses with its high-quality workmanship and materials: The vertically mounted motor and pump unit (upright concept) features a wobble-plate pump with stainless steel pistons and brass cylinder head, combined with a slow-running, 4-pole motor with water and air cooling, allowing for a compact design for maximum mobility. The aluminum frame supports make the chassis robust, lightweight, and suitable for crane loading. Included is an Ultra Guard high-pressure hose with durable Teflon® coating and automatic hose reel for winding and unwinding even under pressure and at an angle of up to 45°, reducing setup times by up to 50 percent. This high-end unit is complemented by accessory storage options such as a kangaroo pouch and adjustable hooks. Scope of delivery - Pressure shutdown - Dirt blaster - 4-pole three-phase motor with air and water cooling - 3-piston axial pump with stainless steel pistons - Spray lance, 1050 mm - Integrated fine water filter - EASY!Force Advanced spray gun - Spray gun with soft grip insert - High-pressure hose length, 20 m - High-pressure hose specification, DN 8, 315 bar Nodpfx Aeyyxwzoc Aslg - Hose type, Ultra Guard - Oil sight glass - Power nozzle - Servo Control - Brass water inlet Technical data: Power supply: 400V / 7 KW Working pressure: 50-200 bar Inlet temperature: max. 60°C Weight: 82 kg

Year of construction: 2024, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Nljdpfx Aeu Tk Etoc Aog Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, MORGAN RUSHWORTH GUILLOTINE MODEL HSGS 3100 X 6 MM CNC CONTROL - CYBELEC CYBTOUCH 6 YEAR 2016 FRONT AND REAR GUARDS SQUARING ARM FRONT SUPPORTS BLADES EXCELLENT BLADE GAP Nedpez Ehtwsfx Ac Ajlg IN EXCELLENT CONDITION , ONLY USED ON LIGHT MATERIAL SINCE NEW CAN BE VIEWED AT OUR WORKS OR A VIDEO CAN BE SENT

Condition: used, mileage: 1,294,000 km, power: 323 kW (439.16 HP), first registration: 03/2013, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, Year of construction: 2013, LICENSE PLATE: EN748TG TITLE: USED SCANIA 440 TRACTOR WITH FIFTH WHEEL REF: 26C50 Nledpfezwh Ibsx Ac Aog YEAR: 03/2013 HORSEPOWER: 440 ENGINE DISPLACEMENT: 12740 EURO EMISSION STANDARD: 5 KM: 1,294,000 TRANSMISSION: automatic DIFFERENTIAL LOCK: yes RETARDER/INTARDER: yes AXLES: 2 4x2 WHEELBASE: 3700 TOWING CAPABILITY: yes ORIGIN: Italy CABIN: short and high NUMBER OF SEATS: 2 UNLADEN WEIGHT: 7490 kg - TRACTOR: 18000 kg at full load - TRACTOR + TRAILER: 44000 kg at full load OVERALL LENGTH: 6.12 m OVERALL WIDTH: 2.55 m CAN TOW SEMI-TRAILERS WITH A MAXIMUM WIDTH OF: 2.60 m REFURBISHED: no SERVICED: no TIRES: 100% new PRICE: €9,500.00 + VAT. Errors and/or omissions excepted. The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers and demountable equipment. With a fleet of over 50 trucks and over 150 bodies, containers with and without demountable cranes, ready for delivery. S.E.&O Given the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: good (used), Year of construction: 2006, Compact and fast strapping machine with maximum package dimensions of approximately 600 mm wide x 600 mm high from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward spool changing and threading system. -Sealing type: Hot wedge welding. -Up to approximately 42 straps per minute. -Strap type: PP strap. -Strap width adjustable from 5-9 mm: Set to 5 mm. -Strap tension adjustable on the control panel. -Soft tensioning possible. -Standby function / power saving mode. -Sturdy foot pedal. Nedspuy Itjpfx Ac Aelg -Low-maintenance and low-wear strap frame. -Movable and lockable via foot casters. The machine can be demonstrated with power on.

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, Year of construction: 2026, Equipment: air conditioning, all wheel drive, crane, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Inspection/Initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot TERRAIN CAPABILITIES ? Gradient climb: up to 60% ? Side slope: up to 40% ? Wading depth: up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Ideal for work off paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system Nedpfx Acjzdl Sdj Ajlg CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Continuous slewing system ? Hydraulic six-section boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in moorlands and nature reserves ? Disaster relief and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the PALFINGER PK 23002 SH E Power Link Plus mounted on it combines maximum off-road performance with powerful crane technology. Due to the extremely low ground pressure, the high payload, and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: good (used), Year of construction: 2008, Professional, compact, and high-performance strapping machine from a renowned European manufacturer with internal frame dimensions of approximately width 650 x height 500 mm, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system as well as a quick-change coil system. -Up to 70 strappings per minute. Nlsdsy Akphopfx Ac Asg -Strap tension adjustable. -Soft tension possible. -Automatic strap feed. -Strapping activation possible from both sides (optionally from the front or rear of the machine) via foot pedals. Alternatively, automatic strapping activation via sensor in the tabletop is possible. -Wear-free strap guides with quick-change system. -Machine can be moved and locked using castors. -Documentation includes operator’s manual, spare parts lists, and wiring diagrams. The machine can be demonstrated under power.

Condition: new, Year of construction: 2026, The machine is designed to cut both soft and hard wood or wood blocks in lengths compatible with the design of the machine. Dry or fresh (raw) wood can also be cut. This model is equipped with a powerful petrol engine. The absence of a power connection allows greater mobility and independence. Maximum cutting length depends on the number of extensions used (optional equipment). In the basic version, it is 2.72 m. Gasoline engine (LIFAN, manual + key start) 9HP Capacity 301cc The maximum dimensions of the workpiece 660x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Transport dimensions P1:1800 * 550 * 810 mm,P2: 2000 * 140 * 95 mm Weight 312/344 kg Nedpfxjgykduj Ac Aelg Additional 2 Meter section costs 350 euro without VAT

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Iveco AS260S50Y/FS 6x2-4 Beverage Box Body with Tail Lift Nljdpfxey Hn U Nj Ac Ajg Böse swing wall body, tail lift: BÄR BC 2500 S4U-W4 (2,500 kg), fold-up underride guard, 2x trailer couplings (standard and low-mounted), CA axle configuration 6x2P with 3 axles, trailing axle, CT cab, AS MY version, DR steering SX left-hand drive, EM emission level Europe, EP engine 500 C13 Cursor 13, 500 HP, Euro VI, GT transmission TX-12M 12-speed HiTroniX automated, MT permissible gross weight 26 t, RT drive axle variant, SR single reduction, single axle, SU suspension FP full air suspension, TF brakes DIS-DIS disc/disc, TT additional axle STER steered trailing axle, single tires, WB wheelbase 4,800 mm, 78507 rocking mode (free rocking mode), 73131 DRIVE T. 315/70R22.5, 04047 luggage compartment left and right, 02714 electrically adjustable and heated exterior mirrors, 00632 transparent sun visor, mounted externally on cab roof, 00873 AS cab with standard roof (MY24), 72536 auxiliary diesel/water heater 4KW, 72970 standard refrigerator and storage box, 72251 with curtains at the bed, 72270 one-piece lower bed, degree of firmness – soft, incl. adjustable head section, 78563 horn behind bumper (compressed air), 07599 weight configuration front axle 8,000 kg/rear axle 11,500 kg (technically possible 12,000 kg)/trailing axle 7,500 kg, 75182 electrical preparation for tail lift operation according to VEHH standard, 02532 battery master switch in cab, electrically operated, 08299 air compressor 2-cyl. 630 ccm, 78713 battery charging socket, terminals, 05679 AdBlue tank, 80 liters, 07806 trailer coupling, Ringfeder make, 07228 fuel tank 390 liters, aluminum, 00730 rear axle ratio: i 2.64, 06156 trailer coupling, 40 mm, 130 kN, 00351 edge protector at frame end, 01934 ECO NORMAL PERFORMANCE MODE, 78388 electrical connection for body on left frame, 02548 side marker lights, 75181 reverse warning buzzer, switchable, 01076 high-performance engine brake, 05108 warning beacon, 50105 white IC 194, 30804 operating manuals, 30184 tire manufacturer GOODYEAR, 20294 tires 315/70 R22.5, 26095 FUELMAX ENDURANCE S D, 79443 printed operation and maintenance manual, 00875 infotainment 10" TFT display, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sunblind roller for side windows on driver and passenger side, 02916 driver’s seat HI-Comfort, multi-adjustable, air-sprung, integrated headrest and height-adjustable seatbelt, lumbar support, with 3-stage cooling or heating function, 72543 LED headlamps, 78714 standard rear lights, 72629 fog lamps including cornering/turning light, 00915 electric parking brake, 07306 axle load display in cluster, 00883 corrective steering function (CSF) + lane departure warning system (LDWS), 00890 adaptive cruise control (ACC) with stop & go, 73240 electrohydraulic power steering. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For further information, please visit our website. ... Subject to errors, alterations, and prior sale!!! ... ESP, navigation system, stationary heater Cab: Long-distance transport

Condition: new, Year of construction: 2026, The machine is designed to cut both soft and hard wood or wood blocks in lengths compatible with the design of the machine. Dry or fresh (raw) wood can also be cut. This model is equipped with a powerful petrol engine. The absence of a power connection allows greater mobility and independence. Maximum cutting length depends on the number of extensions used (optional equipment). In the basic version, it is 2.72 m. 15HP gasoline engine (LIFAN, manual start + key) Capacity 420cc The maximum dimensions of the workpiece 790x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Transport dimensions P1: 1800 * 550 * 810 mm P2: 2000 * 140 * 95 mm Weight 312/344 kg Njdpfegykfvex Ac Aelg Additional 2 Meter section costs 350 euro without VAT

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data Nlodpfx Acsw D E Ube Ajg This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: new, Year of construction: 2024, Exhibition Machine Year of Construction: 2024 Equipment and Technical Data: Robust German engineering for trimming, cross-cutting, formatting, mitre cutting, etc. - Top-mounted control panel at eye level, swiveling, incl. fence guide - 7" touchscreen control for the electromotive positioning of cutting height, saw blade swivel adjustment, cut width stop and optionally for the height and side adjustment of the scoring saw Auto-EPS. Tool database for 50 saw blades and display of the current speed. - Electromotive height and swivel adjustment - Swivel range of the saw blade from 0 to 47° - APA saw blade quick clamping system - Speed of main saw blade 3000/4000/5000/6000 rpm - Protective device that can be swiveled away on both sides, safety guard with interchangeable insert wide/narrow for saw blades up to Ø 450 mm - Width stop with a cutting width of 1250 mm, electromotive - Trolley with a cutting length of 3200 mm and locking every 50 mm - Cross slide with support roller and adjustable extension in both directions. Length stop with mm scale and extension up to 3500 mm with 2 adjustable folding stops and 1 end stop, simultaneously usable as an angle mitre stop on both sides, infinitely adjustable from 0-46° with automatic length compensation and detent for 15°, 22.5°, 30°, 45° fixable. - Push-button control with electronic soft start (start/stop) - Electronic, maintenance-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at the width stop 1250 mm, electromotive - Length stop on the cross slide extendable up to 3500 mm - Max. saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast iron table top 1200 x 665 mm - plus table extension 750 x 655 mm - Table extension 1430 x 940 mm - Table height / working height 900 mm - Extraction connection 120 mm on the machine body, 80 mm on the safety guard - Motor power 5.5 kW / 7.5 HP - Electrical voltage 400 V / 50 Hz - Trolley, length and width stop profiles anodized Nedew I Ummjpfx Ac Aslg - Machine body and swivel arm powder-coated in anthracite RAL 7021, cladding sheet safety guard on top in violet blue RAL 5000, on the machine body in light gray RAL 7035 - Footprint: 7110 x 4150 mm - Weight: approx. 1050 kg depending on the model, up to 1250 kg - CE compliant, GS tested, BG-wood dust tested Special equipment: Incl. scoring unit 0.55 kW, electromotive positioning for side and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table into a lateral parking position, so that larger saw blades than Ø 350 mm can also be used without removing the scoring saw blades. Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: Tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by incremental adjustment by 0.05 mm per step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 Incl. SWIVELING DEVICE FOR THE CROSS SLIDE Quick and ergonomic sliding into the parking position Incl. Length stop with digital display mounted on each stop flap, adjustable to 0.1 mm, length max. 3300 mm

Condition: used, Year of construction: 2014, The Kongsberg C series is a multifunction super-wide digital cutting table for soft and rigid signage production. It’s perfect for protective packaging and can handle a wide range of materials, from foam and plastics, flexible materials, folding carton and all kinds of corrugated. The Kongsberg C table is designed to keep up with the faster, wider printers of today and tomorrow. Exceeding the standards in versatility, precision and productivity, it has everything that Kongsberg tables are noted for, and more. Max. material size: 3200 x 3200 mm Max. speed: 1666 mm/s Nodpfx Acszcqp To Aelg Max. acceleration 15.7 m/s2 Tools: - vibracut HF - ⁠presscut - ⁠rotacut - ⁠rm knife - ⁠heavy duty unit - ⁠cordoni di varie tipologie - ⁠HD-30 - ⁠V-notch knife 45 In production, demo possible upon request For further technical details please refer to attached brochure

Condition: new, functionality: fully functional, ACCESS IT – IT PAYS OFF – SPECIAL PRICE + LIMITED QUANTITY iCOMBI PRO 10-1/1 E NEW, IN ORIGINAL PACKAGING + 1 YEAR MANUFACTURER'S WARRANTY + 2 YEARS WARRANTY WHEN INSTALLED BY A RATIONAL SERVICE PARTNER The iCombi Pro is the latest combination oven from RATIONAL. The iCombi Pro 10-1/1 electric model with 10 GN 1/1 compartments is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant supervision. The super-fast intermediate and self-cleaning functions keep your appliance sparkling clean. You will receive an invoice with VAT shown. Immediately available in stock!!! OUR DEVICE SERVICE FOR YOU: Up to 2 years manufacturer's warranty High-quality branded devices at fair prices Professional and competent advice – before and after purchase Free shipping within Germany (excluding islands/mountain stations) Provision of operating instructions, connection diagrams & spare parts Trade-in of your combination oven from model year 2011 Complete range of accessories at attractive prices Condition: New, fully functional, year of manufacture 2026 TECHNICAL DATA: W x D x H: 850 x 842 x 1014 mm Power connection: V: 400 / Hz: 50-60 / kW: 18.9 Weight: 127 kg SPECIAL FEATURES: Energy-efficient: 60% less energy consumption thanks to state-of-the-art thermal insulation Self-cleaning: The device cleans itself automatically using an installed program Operation possible without an additional water softening system and without additional descaling FURTHER INFORMATION: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Recognizes the size, the quantity of food being cooked, and the product condition and calculates the browning accordingly Learns which cooking habits are used frequently and implements them Determines the ideal cooking path to achieve the desired result MyDispalay – self-configurable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the device display Core temperature probe with automatic error correction in case of probe failure and positioning aid Door compartment glazed, energy-saving LED interior lighting Includes energy consumption display Humidity regulation: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Spraying can be adjusted in 3 stages USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: Rapid cooling of the cooking chamber Automatic adjustment to the installation location (altitude, climate, etc.) Device door with ventilated triple-glazed panel and pivoting inner panel Wastewater fixed connection permissible according to SVGW Splash and spray water protection IP X 5 Njdpszyl Rrefx Ac Aslg Separate solenoid valves for soft and hot water up to +30°C Automatic start time preselection with date and time adjustable Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, mileage: 890,646 km, power: 279 kW (379.33 HP), first registration: 04/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 39 m³, loading space length: 7,020 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, tail-lift, * On-board computer with multi-function steering wheel * Parrot hands-free car kit * Air conditioning ----* Sun visor * Auxiliary headlights * Air horns ----* Hill start assist * Tire pressure monitoring system * Differential lock, rear axle * Leaf/air suspension * Trailer coupling with DouMatic * NATO charging connector ----Menke, 1st floor, livestock body* hydraulic unit * Hydraulic loading ramp * Storage boxes * 1 intermediate gate, hydraulically adjustable * 7.02 x 2.46 x 2.30 = 17.27 m² ----* Tire size, front axle: 275/70R22.5 * Tire size, rear axle: 315/60R22.5 * Fuel tank: 490 liters * AdBlue tank: 80 liters * Technical total weight: 20500 kg Nledpfeym Iy Dex Ac Aeg * Unladen weight: 10675 kg * Permissible trailer load: 17286 kg * Overall length: 9600 mm * Wheelbase: 5500 mm ----Vehicle number/Vehicle: 11799----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport----YOUR VTS TEAM

Condition: used, Year of construction: 2007, functionality: fully functional, Tetra Pak Pressvatic 1+2 – Pre-Press & Block Format System Manufacturer: Tetra Pak Model: Pressvatic 1+2 Machine Type: Cheese Pre-Press & Block Formatting System Application: Industrial Cheese Production Capacity: Approx. 1.8 tonnes/hour Condition: Used Location: Ireland Description: Tetra Pak Pressvatic 1+2 pre-press and block-format system designed for integration into high-volume industrial cheese production lines. The Pressvatic performs the preparation and pre-pressing of cheese curd prior to forming and cutting the cheese into production blocks. It is designed to provide controlled curd distribution, whey drainage, pre-pressing and block formatting as part of an automated cheese manufacturing process. The system is particularly suited to production of granular and round-eyed cheeses and can be integrated with upstream cheese vats and curd-handling equipment and downstream main presses. Key Features: - Tetra Pak Pressvatic 1+2 system - Automatic pre-pressing and block formatting - Approx. 1.8 tonnes/hour capacity - Designed for industrial cheese production - Automated curd distribution - Whey drainage system - Pneumatic pre-pressing - Cheese block forming and cutting - Stainless-steel food-processing construction - Designed for integration into automated cheese production lines - CIP-compatible hygienic design - Suitable for continuous industrial cheese manufacturing operations - Cheese Applications Nlsdpfx Acjzy Rxhe Aog Suitable for production of a range of cheeses including: Gouda Edam Havarti Swiss-type cheeses Other granular and round-eyed cheeses Tetra Pak Pressvatic, Tetra Pak Pressvatic 1+2, Pressvatic 1+2, Tetra Pak cheese equipment, Tetra Pak cheese press, cheese pre press, cheese pre-press, cheese block former, cheese block formatting machine, cheese block forming machine, cheese production equipment, cheese pressing equipment, dairy processing equipment, cheese manufacturing equipment, industrial cheese equipment, used cheese machinery, used dairy equipment, Tetra Pak dairy equipment, 1.8 tonne cheese press, cheese production line, Gouda cheese equipment, Edam cheese equipment, Havarti cheese equipment, Ireland, Europe