Used Ryobi Sheetfed-Offset for sale (760)

Condition: excellent (used), Year of construction: 2000, Ref:11056 . 2000 Hunkeler VEA 520-K-HHS 3000 Endsheet Paster. For inside & outside gluing of end sheet papers, greetings cards inserts and glue-on mounts. Comprising: 1 x product feed (spare feed arm for large format products) 1 x sheet/card feed Nwsdpfx Abox Uwznekjh Sheet counter PVA cold glue system Robatech glue system Table delivery Integral compressor I.R. light beam guard Including tools & accessories. Specification: Product sizes, outside gluing, Max: 520 x 310 mm Min: 100 x 70 mm inserting/tipping-in, Max: 320 x 260 mm (with accessories) Offset gluing (for outside gluing only): - Maximum 50 mm from the fold - No restrictions in travel direction Mechanical speed, Max: 8,400 cycles/hr.

Condition: good (used), Year of construction: 2009, Ref: 11073 . 2009 AL-MEISTER PLS3310 Pluster Laminator 350mmx500mm single sided laminator for a wide variety of stock. Features: Very user friendly Cost saving, optimized efficiency Paper feeding, laminating and separating all in one go. Pluster ‘s unique feature is that the film setting information is stored for future reproduction. Nwjdpfxoymz N Sj Abksh Fujipla's accumulated laminating technology provides excellent quality. Offset & digital printing on demand can be perfectly laminated with Fujipla's special SAP film. The most compact machine on the market with the lowest noise level. Can be used anywhere, from factories to office spaces or small areas. Specification: Processing Speed: 1.0-5.0m/min. (*1) Warm-up Time: Approx. 15-30min. (*2) Temperature Range: Ambience, 60-130°C Feeder Max. Load: 100mm Paper Thickness: 115-300g/m2 Max. Paper Size: 350mm(W) × 500mm(L) Min. Paper Size: 318mm(W) X 450mm(L) Power Consumption: 1.0kw / 6A Power Source: AC220-240V Net Weight: 151.6kg

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Nwedpfx Aeyw Hwdsbksh Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: used, Year of construction: 2009, 2009 OKUMA MILLAC 800 VH Palletised System 5 Axis Machining Centre With OSP P200M Control Automatic Pallet Changer (APC) 6-Station Automatic Pallet Pool, Including 4 Additional Pallets. Tool Magazine 120-Station ATC (Automatic Tool Changer). Linear Glass Scales On 'X, Y, Z' axes (In Addition To Standard Encoders). 'A'-Axis Rotary Scale: Circular Glass Scale On Tilting Head Spindle ('A'-Axis), 0.001° Resolution, Equipped With Tilting Brake Clamping. 'C'-Axis Rotary Scale: Circular Glass Scale On Rotary Table ('C'-Axis), 0.001° Resolution, Equipped With Continuous Brake Clamping. Maximum Spindle Speed 10,000rpm (18.5/22 kW Motor), 21 Nm Torque. Spindle Taper BT 50 BIG PLUS. Pallet Dimension 800 x 800mm. Maximum Pallet Load 1,000kg. Axis Travel 'X'=1,020mm, 'Y'=1,020mm, 'Z'=1,020mm. Rapid Traverse 'X'=30m/min, 'Y'==30m/min, 'Z'=30m/min, 'A'=3,600min-1, 'C'=3,600min-1. Cutting Feed 'X, Y, Z'=1-12,000mm/min, 'A, C'=1-2,400°/min. Spindle Nose To Pallet Top (Vertical) -100 To 920mm. Spindle Centre To Pallet Centre (Vertical) -50 To 970mm. Spindle Centre To Pallet Top (Horizontal) 150-1,170mm. Spindle Nose To Pallet Centre (Horizontal) -300 To 720mm. Maximum Tool Ø125mm (Ø200mm Without Adjacent Tool), Maximum Tool Length 400mm, Maximum Tool Weight 20kg. Tool Change Time (T-T) 4.5sec. Power Capacity 60kVA. S/No.143486 (2009/03). Njdpfx Abjzfhudjkewh With Workpiece Probe: Spindle-Loadable Measuring Probe (From ATC) For Workpiece Zero-Setting & Inspection, Including Macro B Software Option On The CNC. Air Blow System: Spindle Annular Air Blow For Chip Removal & Cone/Flange Cleaning (BT 50 Big Plus). Tool Sensor: BLUM Laser System For Tool Length And Ø Control, Including Pneumatic System For Laser Lens Cleaning. Coolant Through Spindle (CTS): High-Pressure CTS System At 70 BAR (13/18 L/min / 6.9 MPa) With Inline Centrifugal Filter. Spindle Air/Fluid Output: Selectable Air Blow Or Coolant Through Spindle. Shower Coolant: Overhead Shower Wash System. Wash Gun: Coolant Wash-Down Gun Including Dedicated Pump. Chip Conveyor: Drum Filter Type Chip Conveyor With 700L Tank. Oil Skimmer: Installed On The Chip Conveyor. Work Coordinate System Expansion: Expanded To 400 Tool/Workpiece Origins. Tool Offset Expansion: Expanded To 500 Tool Length And Radius Offsets. 3D Tool Radius Compensation: Three-Dimensional Tool Radius Compensation Software. SUPER NURBS Kit: Included (Features: Tool Length Compensation, Vector Control, Lateral Tool Compensation). Data Transfer: DNC-DT Ethernet Software Interface. Programming Functions: Scaling (G50/G51 codes), Mirror Imaging, And Programmable Custom Message Input. Cycle Restart: Sequence Return / Block Restart From Any Interrupted Block. MOP (Machining Operation Monitor): Self-Learning Cutting Load Control/Tool Overload Monitoring. G93 Function: Inverse Time Feed Function. Thermal Compensation: Spindle Tilt Thermal Compensation Software. Overall Dimensions L4,760 x D6,300 x H3,600mm. Weight 22,000kg.

Condition: used, Used machineCondition: age-appropriateTable size 2600 x 900 mmSanding length max. usable 2500 mmBelt length 7100 mm x 150 mm1100 mm offset rightAvailability: short termLocation: Solingen Nwjdpew I Uibofx Abkeh

Condition: used, Used machine Condition: age-appropriate Technical data: Table size 2600 x 900 mm Nodpfx Abswka Rwokewh Max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right Availability: short term Location: Solingen

Condition: used, Year of construction: 1999, Offset 8 color with perfecting Heidelberg SM74-8-P-H Year: 1999 Number of impressions (mio): 247 Machine control - CP 2000 Feeder - Preset feeder - Suction feeder table - Double sheet control - Steel plate in feeder Printing units Nwsdpfx Aezdcx Aebksh - Number of printing unit(s): 8 - Machine with perfecting: 8/0, 4/4 - AutoPlate - Alcolor dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans Delivery - Standard delivery - Powder spray

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Nedpfx Abevr Eh Eskewh Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 1,600 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 127 mm, number of axes: 3, This 3-axis KNUTH Turnado 280/1500 was manufactured in 2018. It features a distance between centers of 1,420 mm and a swing over bed of 560 mm. The machine is equipped with a spindle speed range of 25 – 1,600 rpm and includes a 3-axis Digital Readout (DRO) and a quick change tool post. If you are looking to get high-quality turning capabilities, consider the KNUTH Turnado 280/1500 horizontal turning machine we have for sale. Contact us for further details. Technical specifications • Distance between centers: 1,420 mm • Swing over bed: 560 mm • Swing over cross slide: 360 mm • Swing in gap: 790 mm • Gap length: 180 mm • Bed width: 350 mmTravels • Compound slide swivel: ±52°Spindle • Spindle nose: Camlock D1-8 • Spindle bore: 80 mm Nwjdpozgfqfofx Abkeh • Spindle taper: MT7 • Number of spindle speeds: 12Feed rates • Longitudinal feed: 0.059–1.646 mm/rev • Cross feed: 0.020–0.573 mm/revThread cutting • Metric threads: 0.2–14 mm (47 ranges) • Module threads: 0.1–7 mm (39 ranges) • Whitworth threads: 2–112 TPI (60 ranges) • Diametral pitch threads: 4–112 DP (50 ranges)Tailstock • Tailstock taper: MT5 • Tailstock quill diameter: 76 mm • Tailstock quill stroke: 180 mm • Tailstock offset adjustment: ±12 mmMachine data • Main motor power: 7.8 kW • Voltage: 400 V • Frequency: 50/60 Hz Additional equipment • 3-axis Digital Readout (DRO) • Quick Change Tool Post • Chip conveyor • Extensive standard tooling package Technical Specification Counter Spindle Yes Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • Robot controller and Teach Panel • Bumper (remote protection) and protective foil for TeachPanel • Multifunction flange for magnetic attachment to torch neck • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm Nwodpfxox D E Huj Abksh • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information The equipment is in like-new condition because the project for this purchase never materialized.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Special equipment: Nwsdew Nadyopfx Abkoh High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: used, Used machine Condition: age-appropriate table size 2600 x 900 mm max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right motor 5,2 kW Nodpfx Absw I U Hyjkjwh Shipping dimensions: 4300x1650x1800 mm weight: 620 kg Availability: short term Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit Nwsdsy Nuf Topfx Abkoh - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Nwedpfx Abexc Rmqsksh Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, controller manufacturer: MAZATROL, controller model: Mazatrol SmoothG CNC, workpiece diameter (max.): 695 mm, This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control system, it ensures precision and efficiency. The main spindle supports up to 5000 rpm, while the second spindle reaches 6000 rpm. A great opportunity to buy this Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details. Machine Benefits Technical Machine Benefits 1. Capacity:- Maximum Swing: 695 mm- Maximum Machining Diameter: 380 mm- Maximum Bar Work Capacity: 65 mm2. Spindle:- Main Spindle Chuck Size: 8 inches- Main Spindle Maximum Speed: 5000 rpm- Second Spindle Chuck Size: 6 inches- Second Spindle Maximum Speed: 6000 rpm3. Turret:- Number of Tools: 12- Maximum Speed: 5000 rpm4. Axes Travel:- X Axis: 234 mm- Y Axis: 100 mm- Z Axis: 625 mm- W Axis: 585 mm5. Control System:- Mazatrol SmoothG CNCInstalled Options : EIA / ISO programming Spiral machining EIA 3D compensation Rotation function Geometric functions Scaling External data I/O Shape compensation Thread cutting cycle Sub C-axis control Inverse time feed Polar coordinate input G54.1 additional work offsets Synchronous mill tapping Variable 600 macro sets Cylinder & polar coordinate interpolation EIA helical tap cycle EIA pattern cycle Seamless corner control Variable acceleration control Rapid overlap Lead error compensationMachine Hours : Power on time: 12,929 h Auto operation time: 17,565 h Auto cutting time: 15,375 hEquipment included: Turrets: 2 × revolver head – one on each side of the machine Driven tools: 1 × driven tool on the Z axis 1 × driven tool on the X axis Tool holders: Fixed holders for drilling Fixed holders for external turning Nwjdpjyk Tg Refx Abkoh Extra Information Full equipped version with C axis / Y axis / Subspindle / Long bedMachine still under power

Condition: used, Heidelberg GTO 52 Year of manufacture: 1983, total print count: 13.4 million, conventional dampening system (blanket), Plus version including numbering unit Nodpfx Aszgkb Aobkjwh Inline coating system KVE 52 (for full and partial coating) UV drying system ADNOS 1UV46 (for curing UV inks and coatings)

Condition: used, mileage: 590,500 km, power: 330 kW (448.67 HP), first registration: 05/2021, overall weight: 19,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Engine 330 kW (449 hp), Euro VI, D, 2200 Nm, 2nd generation OM471 engine, High Performance Engine Brake, automatic transmission G 211-12/14,93-1,0 Mercedes PowerShift 3, ADR/GGVS equipment, auxiliary drive, differential lock rear axle, axle ratio i = 2.412, L BigSpace cab, level floor, hole pattern on the frame, continuous, footboard over frame, partial covering of frame overhang 1050 mm, main tank on the left 720 L + 75 L AdBlue, second tank on the right 430 L, lockable, standard fifth wheel coupling, Jost JSK 37C, fifth wheel coupling height H = 150 mm, fifth wheel offset +600 mm, disc brakes on front and rear axle, electronic braking system with ABS and ASR, hazard warning lights during emergency braking, electronic parking brake with acoustic warning, Predictive Powertrain Control, stability control assistant (ESP), lane keeping assist, distance keeping assist, attention assist, traffic sign assist, Active Brake Assist 5, cruise control, cab suspension, comfort air suspension, cab tilting mechanism mechanically-hydraulically operated, tinted windshield, light sensor, rain sensor, sunroof, electric, exterior storage compartment flap, left, exterior storage compartment flap right, storage box left under cab, door extension, curb mirrors, front mirror, heated, exterior sun visor transparent, comfort central locking system, driver's comfort suspension seat, co-driver's functional seat, seat upholstery, velour, comfort lower bunk, comfort upper bunk narrow, multi-function leather steering wheel, driver airbag, carpet covering for engine tunnel, side sun blind driver's side, electric windows on both sides, digital tachograph, 2nd generation, ADR, tachograph manufacturer VDO, on-board diagnostics, trip computer, interactive multimedia cockpit, maintenance system, Remote Online, pre-wiring for Mercedes-Benz Truck App Portal, sound system, navigation system, FleetBoard Eco Support, prerequisite FleetBoard Manager App, Truck Data Center 7, pre-wiring for Truck Data Center 7, pre-wiring for toll collection, pre-wiring for CB radio 12 V DIN socket, 24 V/15 A socket, entry lights in door panel, co-driver footwell, ambient lighting, warm water auxiliary heater, cab residual heat utilization, additional thermal insulation, electric auxiliary air conditioning, automatic climate control, bottle holder, document holder for DIN A4, storage compartment lids on driver and co-driver side, drawers under bunk, storage flaps above windshield, refrigerator in drawer under bunk, compressed air connection in cab, LED daytime running lights, halogen fog lights, work lights below, marker lights on the side, LED outline marker lights, side marker lights flashing, Safety Pack, Climate Package, chrome interior package, fuel tank capacity 1150. Njdszg R Hlspfx Abkewh

Condition: used, mileage: 437,500 km, power: 350 kW (475.87 HP), first registration: 11/2021, overall weight: 19,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Automatic climate control + auxiliary air conditioning system, engine 350 kW (476 hp), Euro VI, D, 2200 Nm, 2nd generation OM471 engine, high-performance engine brake, automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3, front axle, differential lock on rear axle, axle ratio i = 2.412, L GigaSpace cab, 2.50 m, flat floor in L cab, hole pattern on frame, continuous, step plate over frame, partial covering of frame overhang 1050 mm, main tank on the left 720 L + 75 L AdBlue, second tank on the right 430 L, aluminum tanks lockable, standard fifth wheel coupling, Jost JSK 37C, fifth wheel coupling height H = 150 mm, fifth wheel offset +600 mm, disc brakes on front and rear axles, electronic braking system with ABS and ASR, hazard warning lights during emergency braking, electronic parking brake with acoustic warning, predictive powertrain control, stability control assistant (ESP), lane keeping assistant, distance control assistant, attention assistant, traffic sign assistant, Active Brake Assist 5, cruise control, cab suspension, comfort air suspension, cab tilting mechanism mechanical-hydraulic, tinted windshield, light sensor, rain sensor, sunroof, electric, storage compartment external flap, left, storage compartment external flap right, storage compartment left under cab, door extension, ramp mirrors, front mirror, heated, MirrorCam, exterior sun visor transparent, comfort central locking system, driver's comfort suspension seat, co-driver's functional seat, seat cover, velour, comfort lower bunk, comfort upper bunk narrow, multifunctional leather steering wheel, driver airbag, carpet covering engine tunnel, side sun visor driver's side, electric windows on both sides, digital tachograph, 2nd generation, ADR, tachograph manufacturer VDO, on-board diagnostics, trip computer, interactive multimedia cockpit, maintenance system, Remote Online, preparation for Mercedes-Benz Truck App Portal, sound system, navigation system, FleetBoard Eco Support, prerequisite FleetBoard Manager App, Truck Data Center 7, preparation for Truck Data Center 7, preparation for toll collection, preparation for CB radio 12 V DIN socket, socket 24 V/15 A, entry lights in door trim, co-driver's footwell, ambient lighting, warm water auxiliary heater, cab waste heat recovery, additional thermal insulation, electric auxiliary air conditioning system, automatic climate control, bottle holder, document holder DIN A4, storage compartment cover driver's and co-driver's side, drawers under bunk, storage flaps above windshield, refrigerator in drawer under bunk, compressed air connection in cab, LED daytime running lights, halogen fog lights, lower work lights, side marker lights, LED outline lights, blinking side marker lights, Safety Pack, Climate Package, Chrome Package, Interior Nwodpfxezg R Hfo Abkjh

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Equipment: brochure finisher, Equipment: Nwodpfx Aozbyh Ajbksh Counter Color: 3,469,135 B/W: 881,076 Fiery Color Controller E-43-A Vacuum Feed LCIT RT5100 Finisher SR5050 Buffer Pass Unit Type S3 Scanner Monitor, Keyboard, Mouse The Ricoh Pro C7100S is a powerful digital printing system for professional production printing, combining impressive offset-like quality with high speed (up to 80 pages/min), flexible media handling (up to 360 g/m²) and an integrated scanner, making it ideal for demanding print service providers. Reliable High-Performance Production The Ricoh Pro C7100S is the ideal solution for print shops, agencies, or in-house print departments that want to take their productivity and media versatility to the next level. With a constant printing speed of up to 80 pages per minute (in color and black and white) and a maximum monthly volume of up to 240,000 pages (duty cycle up to 700,000 pages), this system delivers maximum efficiency for both small and large print runs. Excellent Image Quality Thanks to the modern VCSEL laser technology and a resolution of up to 1,200 × 4,800 dpi, you get razor-sharp text, the finest color gradations, and accurate image reproduction. The advanced PXP-EQ toner process expands the color gamut and ensures that the first print is just as brilliant as the last. Includes Color Controller (Fiery) Equipped with an external/integrated Fiery Color Controller (e.g., E-43A / E-83A) for seamless integration into your workflow. Enables professional color management, RIP acceleration, and easy handling of variable data printing jobs (VDP). Technical Data at a Glance: - Model: Ricoh Pro C7100S (MFP / incl. scanner) - Printing Technology: Laser / 4-color printing system - Speed: 80 pages/minute - Max. Paper Size: A3+ (oversize) - Paper Weight: 52 to 360 g/m² - Max. Paper Capacity: Up to 16,200 sheets - Dimensions (W x D x H): 1,320 × 910 × 1,218 mm - Weight: approx. 580 kg Subject to prior sale and errors.

Condition: good (used), Matrices, 100 mm x 2 Offset punches x 2 Nwodszaitrepfx Abkoh In good condition

Condition: used, first registration: 02/2019, Year of construction: 2019, Fixed trailer hitch Vehicle equipment – Basic equipment in conjunction with STVZO – According to EU Directives 2007/46 and 2002/24 – Classification according to N1 – With integrated platform body in the frame – Chassis made of aluminum ENAW-5754H111 – 10-year warranty on the entire frame – Driver’s cab with steel frame and plastic cladding – Door frames glazed with safety glass and ABS on both sides, opening forwards – Towing capacity with STVZO: 450 kg – Towing capacity without STVZO: 3000 kg – AC electric motor, 3-phase, 72V/10 kW continuous output – Peak power temporarily up to 15 kW – Max. torque 83 Nm – Acting on the rear axle – Curtis controller with vector algorithm, 300 A – Driving speed 40 km/h with STVZO, turning radius up to 60 km/h – Loading area: 2,400 x 1,100 mm without platform body – Loading edge height: 730 mm – Gradeability (laden) up to 15% Equipment: EQ 21 Double doors with ABS safety glass and sliding windows EQ 01 Electric heater (in conjunction with EQ03 Webasto heater) EQ 31 Side mirrors EQ 33 Three-point seat belts for both seats EQ 71 Integrated battery charger for lithium batteries EQ 74 Battery preheating system for lithium batteries Opt311 Two-stage drive select, individually programmable Opt521 Forward travel warning signal Opt522 Reverse warning signal EQ 67 Lithium iron phosphate batteries 12.8 kWh / 100 km OPT316 Electric power steering OPT611 Ball-type trailer hitch LR approved for 450 kg OPT631 Rear driver’s cab protector OPT639 Storage box behind the driver’s cab, accessible from both sides OPT718 Tires 165/70R13 M&S, price surcharge for standard tires OPT723 Set of 6 lashing rings in platform/load bed OPT912 LED beacon OPT913 Class 2 reflector stripes set for Germany (in conjunction with beacon / STVZO approval) OPT931 Radio and speakers Njdpfxey R Snhj Abkewh AL16 Tipper platform L 2,200 mm with drop sides Body: Waste body in complete aluminum structure, laser cut, bent, and welded as a one-piece tub with two offset sliding doors, lockable – openable and loadable from both sides – complete frame welded with underbody – mounted on tipper platform and fixed with bolts – tiltable backwards over tipper platform – rear door for emptying – four loading eyes for mounting when empty We are pleased to offer you suitable financing, hire-purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of new equipment in stock as well as demonstration units. Please contact us! We rent vehicles with or without drivers as well as machines. A wide range of used machines and equipment is always available. Subject to technical modifications, errors, and prior sale. Further information Body: Platform body with sides Operating hours: 41

Condition: ready for operation (used), Heidenhain UVR 150D ID 390421-51. The costs cover only the repair analysis of your component, which you can send to us. After the assessment of your component, you will receive a quotation detailing the actual repair costs. If you approve the repair, the analysis costs will be offset. During the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Nwjdpfjy Nrt Ujx Abkjh

Condition: good (used), Year of construction: 2007, Original Heidelberg bending machine, maximum sheet size 102. Nedpfszg Uvqox Abkswh

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)! Nwedpfxoxbtrte Abkjh

Condition: ready for operation (used), functionality: fully functional, The Lakidis PL900 mixer is an industrial double-blade mixer designed for food processing professionals seeking fast and uniform product homogenization. Particularly suitable for the meat, poultry, fish, and processed food industries, it allows for the creation of a homogeneous mixture while preserving the quality of the raw materials. Thanks to its counter-rotating double-blade system, the Lakidis PL900 ensures efficient distribution of spices, marinades, sauces, and additives throughout the mixture. The blades rotate in opposite directions with a slight vertical offset, which promotes optimal homogenization. As a result, the quality of batches is improved, and production variations are reduced. Furthermore, the speed and direction of rotation can be adjusted according to manufacturing needs. Its construction entirely in stainless steel guarantees a high level of hygiene and facilitates daily cleaning. The front discharge system allows for rapid emptying into standard 200-liter containers, while the pneumatic lid ensures safe production operations. Moreover, its robust design allows it to operate in demanding industrial environments with excellent reliability. Finally, the Lakidis PL900 mixer represents a high-performance solution for companies wishing to increase their mixing capacity while maintaining consistent quality. As a used, inspected, and reconditioned piece of equipment, it offers an excellent performance-to-investment ratio for food industry manufacturers. Nwedpfx Aozcni Djbkjh Technical specifications: Brand: Lakidis Model: PL900 Type: Industrial double-blade mixer Tank capacity: 900 L Mixing system: counter-rotating double blades Motor power: 11 kW Loader power: 1.1 kW Construction: all-stainless steel Discharge: front, to 200 L container Length: 1800 mm Width: 1150 mm Height: 1700 mm Width with loader: 2000 mm Height with loader: 2400 mm