Used Rotomec Rotoconvert Machine for sale (64,585)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Djdpfx Aez Ngk Rja Iowc

Condition: excellent (used), The HEBROCK K36 Airtronic is a used edge banding machine with PC control, a touchscreen, and a pivoting control panel. The zero-joint Airtronic system is complemented by extensive equipment for joining, edge banding, capping, milling, and trimming. Control and Workpiece Guidance: The machine has a program memory and automatic pressure beam adjustment. The feed is controlled by a conveyor chain, and the infeed guide is adjustable by motor. An extendable workpiece support assists with workpiece guidance. The feed speed ranges from 7 to 10 m/min. Workpieces with a thickness of 8 to 60 mm and a minimum length of 200 mm can be processed. Edge Processing and Glue Application: A diamond joining cutter operates in both forward and reverse directions and has a power of 2 x 2.2 kW. For glue application, there is a quick-heating tank, a changing device for glue tanks, and interchangeable glue applicators. The use of PUR adhesives is possible. For roll material, an edge thickness of 0.5 to 3 mm is specified. The support plate for the edge material has a diameter of 850 mm. Post-Processing Units: Dodpeymyp Rjfx Aa Ijwc The trimming saw is equipped with an HF motor. This is followed by a flush-cutting unit and a flush, radius, and bevel cutting unit with pneumatic adjustment. A multi-tool and a multi-radius trimming blade are also included. For trimming blade processing, a flat trimming blade and air nozzles on the radius and flat trimming blade are available. The chip collection box is assigned to the radius trimming blade. A changing motor is available for corner copying; the maximum edge thickness for this is 3 mm. Additional Equipment: The machine has spray devices for release agents, cleaning agents, antistatic coolant, and lubricants. LED lighting is installed in the machine area. The total length is 5,540 mm. With dimensions of 5,540 x 1,210 x 1,450 mm, the machine weighs 1,700 kg. The compressed air connection is specified as 7 bar. Condition: The HEBROCK K36 Airtronic is offered as a used machine. Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: new, Drill and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer includes an equipment package. The following items and options are already included in the price: - Drill and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum Dwjdpfx Aou R Tftsa Iec - Shank milling cutter set HSS, 20-piece, OPTIMUM - Precision machine vise FMS 100 Optimum - New exhibition machine -

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun Dsdez Nfirepfx Aa Iswc - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: used, Year of construction: 2013, x-travel 762 mm y-travel 508 mm z-travel 508 mm b-axis ° c-axis 360 ° spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. Condition: Used Technical features & accessories: - Chip conveyor Dedpfx Aez Nqavja Iswc Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Year of construction: 2019, Control HEIDENHAIN x-travel 1.600 mm Djdpjz Nqbtsfx Aa Iswc y-travel 1.300 mm z-travel 700 mm table dimensions 1.500 x 960 mm spindle tunring speed 15.000 U/min number of tool places 30 Pos. Condition: Used Technical features & accessories: - HR510 handwheel - HWANG KANG chip conveyor - KAUKAN KO-4PTHS oil cooling unit - KAUKAN KO-12PTSDC2 oil cooling unit Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2006, Technical details: Dwedpfepumdcsx Aa Ijc x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, Year of construction: 2017, machine/vehicle number: 19665, CNC cylindrical grinding machine Willi Göbel GRS-II-450, Dwedpfjz Nn Drox Aa Iec Serial No. 19665/17, Year of manufacture 2017 with Siemens Sinumerik control The machine can be purchased through an online auction on our website, which you can access by clicking on the advertisement. The auction ends on October 19, 2026, and will run until October 22, 2026.

Condition: used, axle configuration: > 3 axles, first registration: 02/2020, total length: 10,950 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 9,750 mm, color: yellow, Year of construction: 2020, Equipment: ABS, BPW axle. Drum brakes. Leaf spring / steel suspension. Hydraulic ramps, operating on 24 volts. Max. technical weight: 40,000 kg. Coupling to the end of the trailer: 1090 cm. 40 mm / 50 mm towing eye. Loading length: 935 cm. Loading height: +/- 95 cm. = Further information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle 1: Double tires; tire tread depth left inside: 50%; tire tread depth left outside: 50%; tire tread depth right inside: 50%; tire tread depth right outside: 50% Front axle 2: Double tires; tire tread depth left inside: 30%; tire tread depth left outside: 30%; tire tread depth right inside: 30%; tire tread depth right outside: 30% Rear axle 1: Double tires; tire tread depth left inside: 30%; tire tread depth left outside: 30%; tire tread depth right inside: 30%; tire tread depth right outside: 30% Rear axle 2: Double tires; tire tread depth left inside: 30%; tire tread depth left outside: 30%; tire tread depth right inside: 30%; tire tread depth right outside: 30% Weights Unladen weight: 9,100 kg Payload: 26,900 kg GVWR: 36,000 kg Maintenance APK (Technical Inspection): valid until 02/2027 Identification Model number: DIEPLADER / OPRIJ - MACHINE TRAN = Company Information = Dwodpfx Asz Ntfhja Ioc ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Keyence VL-500” 3D co-ordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features incl. software incl. VL-H2P add-on software incl. VL-H2G add-on software incl. laptop for operation incl. calibration plate Ready for immediate use Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Dwodpfx Asz N Akgoa Isc Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 1990, grinding length 600 mm grinding width 375 mm workpiece height 325 mm grinding height 325 mm table load max. 300 kg table longitudinal travel max. 650 mm table speeds 1 - 30 m/min grinding spindle speed 1440 / 2900 U/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 / 4,7 kW vertical feed grinding spindle max. 180 mm/min. cross travel 350 mm cross adjustment 1 - 40 mm rapid traverse cross 1200 mm/min total power requirement 9 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,75 x 2,10 x 2,05 m - with autom. positioning - Accessories: magnetic plate 600 x 350 mm, grinding wheel with flange, wheel trueing attachment, DRO on Y-and Z-axis, 1 grinding wheel and various flanges separate, balancing scale, wet grinding attachment Dedez N Hvaspfx Aa Ijwc

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t The machine is untested and is offered as a source of spare parts! Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, Dwjdpfx Aaowwl N Ss Ioc and prior sale!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table Dsdpfxjz N Dquj Aa Iswc for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm This table has NO option for low e deletion

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). Dwsdoz Ny Rkopfx Aa Ijc • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 500 kN, total length: 3,395 mm, total width: 1,000 mm, total height: 2,000 mm, overall weight: 2,510 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Dedezx Ukfjpfx Aa Iewc Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 50M which is very similar to the BOY 50M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor. Dwedpezhlmijfx Aa Ioc  Type of Machine: Butter Packaging Machine Capacity: ± 600 Kg/h Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height Weight: 250 grams Machine Weight: 840 kg Packaging type: Aluminium and Parchment Paper Motor power: 1,5 kW

Condition: reconditioned (used), QUASER MV204 CNC Vertical Machining Centre Year 2016 Control FANUC 31i-B Table size 700 x 1400 mm Table load 1800 kg Dwodpfxezzymkj Aa Iec Travels XYZ 1270 x 700 x 610 mm Spindle nose to table 150 - 750 mm Spindle speeds to 12000 rpm Spindle taper BT 40 Spindle motor TBC Number of tools 30 ATC Rapid traverse X, Y, Z 36 m/min Weight 10100 kg Supplied with: Swarf Conveyor, Spindle Chiller, Filtermist FX7002, Tooling Package. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27001 Machine Serial Number: 113L160588 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth Dedpoy Dr Hdjfx Aa Iewc 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Condition: good (used), Peter Cox Engineering Industrial Sliver / Slither Machine – stainless steel vegetable processing machine designed for producing slivers/strips from fresh produce. Suitable for integration into vegetable preparation and processing lines. Compact industrial design. Used condition. Dwodszzzmfopfx Aa Ijc

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER Dodpfx Astraaaea Iowc • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Condition: excellent (used), Year of construction: 2010, 200hl Steinecker Krones Brewhouse. Capable of 6 brews per day. Location: UK Available Immediately Including: • Steinecker Mill • Steinecker Cereal Cooker • Steinecker Mash Vessel • Steinecker Lauter Tun • Steinecker Holding Vessel • Steinecker Lauter Worth Heater • Steinecker Copper • Steinecker Whirlpool Dedpfxexb Uz Ao Aa Iswc • Steinecker Wort Cooler • HLT & CLT • Hop Pellets Station • Vapour Condenser • Condensate Cooler • Spent Grain System Contact Indassol UK for Pricing and more details. We are at Drinktec - Please reply to set up a meeting to discuss further.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Dwsdszwwndjpfx Aa Isc Table length 762 mm Table width 406 mm Max. part weight 340 kg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 40 h, machine/vehicle number: Sardsir, Sardsir 1200L continues freezer Gear pump, German parts all round Touch screen lcd, injector dry air auto systems , only used a week Was too large for our production we both this not knowing how much water we need for input , therefore needed a chiller and we are too small to spend for a chiller, we use 150L hour with just a water from pipe so since business didn’t grow so we can spend money , therefore it’s on sell its brand new since we didn’t realy use it You can try and buy. Djdjz Dqykjpfx Aa Iewc

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24 Dwsdpfezb Imasx Aa Ijc €8,500, as is

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 242536, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, MACHINE INFORMATION Manufacturer: Mazak Model: VCS 530C Year: 2012 Condition: (Used) Great Serial Number: 242536 Control: Mazatrol Smart Accessories: 4th Axis, Renishaw Spindle Probe, and Tool probe. MACHINE SPECIFICATIONS Control: Mazatrol Smart X Axis Travel: 1050mm Y Axis Travel: 530mm Z Axis Travel: 510mm Max Workpiece Weight: 1200KG Spindle Speed: 12,000rpm Djdpjz D Euvjfx Aa Iswc Table Size: 1300 x 550mm Tool Change Capacity: 30 ATC Tool Size: BT40