Used Prod-Masz Red Zgr-2200/1,2 for sale (5,377)

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Iasdpfx Aajguk Dkegjt - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) Ijdjmhhy Nopfx Aagoat - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: used, functionality: fully functional, Carton Erector BE-2200 Manufacturer: Soco-System Condition: used Model/Type: BE-2200 ATS Overall length: approx. 2960 mm Overall width: approx. 1700 mm Overall height: approx. 1340/1600 mm Carton size: min. 180 L x 130 W x 100 mm H Carton size: max. 440 L x 315 W x 450 mm H Internal article number: 2026032301 The conveyor system was in operation up until dismantling. Features: - Condition: fully functional, with signs of use - Ideal for rapid material handling - Professionally dismantled and packed - Pick-up address: Industriestraße 5 (47918 Tönisvorst) Iaedpeywkbtefx Aagjt Thanks to the high-quality workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to provide you with a customized offer or advise you on design or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our outstanding network of professionals. We have already successfully implemented projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades or the electronics sector. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components such as picking racks or containers.

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, total height: 1,700 mm, overall weight: 3,550 kg, controller manufacturer: FANUC, controller model: i – SMART PLUS, product length (max.): 2,970 mm, number of axes: 3, This Hyundai WIA SE 2200 LM was manufactured in 2025. It features a maximum turning diameter of Ø300 mm and a length of 529 mm, with a spindle speed of up to 6,000 rpm. The machine includes a 12-tool turret and supports milling with a tool speed also up to 6,000 rpm. Ideal for precision turning and milling tasks. Contact us for more information about this machine. • Condition: Original packaging, 0 operating hours Isdpfxjycv Ege Aagjat • Capacity • Max. swing: Ø600 mm • Swing over the carriage: Ø390 mm • Max. turning diameter: Ø300 mm • Max. turning length: 529 mm • Bar capacity (main): Ø32 mm • Chuck size (main): 5 • Spindle (Main) • Spindle bore: Ø42 mm • Motor (max/cont.): 7.5/3.7 kW (10/5 HP) • Torque (max/cont.): 63.6/23.6 Nm (46.9/17.4 lbf·ft) • Spindle nose: A2-5 • Spindle type: Flat type • C-axis indexing: 0.001° • Feed • Rapid traverse rate (X/Z): 15 m/min • Slide type: Roller LM guide • Turret • Number of tools: 12 (24) • Tool size (OD/ID): Ø20/Ø32 mm • Indexing time: 0.15 sec • Live tool • Milling tool speed: 6,000 rpm • Motor (max/cont.): 3.9/2.6 kW (5/3.5 HP) • Torque (max/cont.): 36.7/18.5 Nm (27.1/13.6 lbf·ft) • Collet size: ER20 (Ø13 (0.5")) • Type: BMT45 • Tailstock • Taper: MT#4 • Quill diameter: Ø55 mm • Travel: 580 mm • Tank capacity • Coolant tank: 200 l • Lubricating tank: 0.7 l • Power supply • Electric power: 23 kVA • Power cable thickness: Over 16 mm² • Voltage/frequency: 220 V, 50/60 Hz

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Iodpfxjx Nkp Is Aageat Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, controller manufacturer: SIEMENS, controller model: 840D SL Sinumerik, overall weight: 20,000 kg, total height: 2,600 mm, spindle motor power: 45,000 W, product length (max.): 5,200 mm, spindle speed (max.): 4,000 rpm, table load: 4,000 kg, number of axes: 5, This 5-axis HABRAMA PPSM 2200 was manufactured in 2009. It features a robust workbench of 390 x 3750 mm, supporting a maximum table load of 4000 kg. The grinding head offers a drive power of 45 kW and a spindle speed of up to 4000 rpm. With a total power consumption of 100 kVA and a weight of 20,000 kg, this machine ensures precision and efficiency for complex grinding tasks. Contact us for more information about this machine. • Axes and travels • C-axis: +30° / -30° • B-axis: +20° / -20° Iaodpsyf Hcuofx Aagjt • U-axis: 105 mm • W-axis: 125 mm • B2-axis: +20° / -20° • Worktable • Workbench size: 390 x 3750 mm • Feed speeds • X-axis: 21 m/min • Y-axis: 10 m/min • Z-axis: 6 m/min • C-axis: 2 m/min • B-axis: 6 m/min • U-axis: 4 m/min • W-axis: 4 m/min • B2-axis: 6 m/min • Grinding head • Grinding wheel mount: 100 mm H5 • Programmable constant cutting speed: 10–80 m/s • Grinding wheel type: ceramic or resin bonded • Max. grinding wheel width: 101 mm • Grinding wheel diameter: 210–400 mm • Grinding wheel bore: 152.4 mm (6") • Grinding range: up to module 22; custom profiles freely programmable • Total machine power consumption: 100 kVA Additional equipment • Hybrid clamping device/plates (workholding) • Coolant system approx. 4000 liters with integrated deep-bed filter

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 610, Cutting and printing line for 3-layer cardboard with flexo printers (2-colour printing) - maximum sheet size 950 x 2200 mm (skip - feed 1200 mm) - minimum sheet size 260 x 280 mm Ijdjwl Izyopfx Aagoat Machine dimensions length - 3550 mm width - 3660 mm height - 3500 mm weight 8000 kg power consumption - 8 kW Feeding unit to the device using a strip. The operation is supported by sucking the sheet with an air pump

Condition: new, Year of construction: 2025, weight 2600 kg height 1550 mm 0 2197 l length 3800 mm revolutions per minute 1500 U/min Iodpfeymf Sqex Aageat voltage 380/50 V/Hz engine output 2 x 7 kW The VKT 2200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 500 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Iasdpfx Ask Dpp Ssagjt Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 30,000 kg, power: 250 kW (339.91 HP), input voltage: 400 V, Stationary shredder LINDNER Jupiter 2200. Electric drive: 250 kW Including switch cabinet and hydraulic unit. Iaedpfx Aaeuv Htujget

Condition: new, Year of construction: 2020, functionality: fully functional, final pressure: 10 bar, input voltage: 400 V, Nominal diameter DN 65 Delivery head H max. 34 m Operating pressure max. 10 bar Supply voltage 3x400 V Frequency 50 Hz Iaodpfx Aaorq Ey Isgjt Rated current 13.2 A Motor protection WSK

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Iedpfoyu Undox Aagoat Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: excellent (used), Year of construction: 1961, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 Iajdpfewfpilex Aagjt -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: new, Year of construction: 2025, TRV 2200: The Perfect Optimizer for Companies Aiming to Stay Competitive The TRV 2200 is the most produced optimizer with the best quality/price ratio in its category, designed to radically transform the production cycles of companies. Here’s why it’s the ideal choice for those seeking superior performance, reliability, and innovation: Unbeatable Speed: With a speed limited to 300 ml/min, the TRV 2200 provides a rapid and smooth workflow, maintaining consistent efficiency. Maximum Precision: Ideal for cutting finished profiles, it guarantees a level of precision that meets even the most demanding requirements. Modular Design: The modular structure allows for customization that perfectly adapts to the needs of every company, optimizing space and production flows. Multi-accessorized: Equipped with numerous accessories for every need, offering unparalleled versatility. Excellent for Every Sector: Whether it's furniture, construction, or woodworking, TRV 2200 is a guaranteed success. Global Efficiency and Industry-Leading Performance Iasdpov Iqdqjfx Aagst Cut, optimize, and revolutionize your production processes: TRV 2200 is already the preferred choice for companies worldwide, which purchase it in series to enhance their competitiveness. This is thanks to minimal maintenance due to the elimination of dynamic components and passive transmissions, and a robust and reliable structure that ensures long-lasting results. Advanced Software Features: Over 100 customized cutting plans: widths, quality, and multiple options to optimize the process. Optimization choices between various modes: Commercial value, Waste, Quantity, Length, and Mixed Optimization. Optimization simulation to predict results before production. Accurate control of processed quantities to continuously monitor efficiency. Internal optimization within the machine body, simplifying the process and recovering valuable space. High-Quality Cutting Unit: Tested conveyor drive system without engaging parts, combined with rubber anti-slip pressure wheels for universal use on various materials. High precision cutting, even with wet and curved boards, thanks to the use of durable materials that ensure constant speed and quality. Sectors Where TRV 2200 Excels: Semi-finished furniture components Parquet Windows and doors Laminated boards, slats, and structures Doors, frames, skirting boards, and construction Don’t miss the opportunity to discover how TRV 2200 can transform your production cycle. Watch the video to see its exceptional performance in action!

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: P5110, input voltage: 230 V, sheet thickness steel (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, working length: 3,000 mm, working width: 1,500 mm, For sale is a professional CNC plasma cutting machine from the renowned Italian manufacturer Soitaab Impianti, model Plasma Red. This machine is designed for high precision, robustness, and continuous operation in demanding industrial environments. Technical specifications: • Working area: 3000 x 1500 mm • Construction: Monobloc design with integrated cutting table and rails, eliminating the need for special foundations and simplifying installation. • Guide system: Dual synchronized drive on the X-axis (gantry system) with precision linear guides and ground racks. • Control: Numerical CNC control with color touchscreen; user-friendly operation. • Positioning speed: High dynamic motion with superior repeatability accuracy. • Extraction system: Integrated table with automatic sectional opening of the fume and dust extraction flaps (linked to torch position). Key features: • Automatic torch height control (THC): Ensures constant distance between the torch and material during the entire cutting process. • Anti-collision system: Protects the torch head from damage in the event of a collision with cut parts. • Cutting quality: Ideal for ferrous metals, stainless steel, and aluminum, delivering high edge accuracy. • CAD/CAM software: Compatible with professional nesting and cutting optimization software solutions. Cutting capacities: • Mild steel: optimal up to 45 mm (maximum 80 mm) • Stainless steel: optimal up to 38 mm (maximum 75 mm) • Aluminum: optimal up to 38 mm (maximum 50 mm) Iaedpfxoy H A Iwj Aaget Condition and notes: The machine has been regularly maintained and is fully operational. It is being sold as part of production capacity upgrades. A detailed equipment list and complete technical documentation are available for inspection.

Condition: used, This listing is for the Gilson PIPETMAN P10 1-10uL Single Channel Pipette with Metal Ejector Colourcode Red The unit is in full working condition and is ready for immediate use Isdpfx Aoxv Dt Deagjat The traditional “L” version: robust, bomb‑proof build, fully autoclavable stainless steel tip‑ejector, volume adjustable 1–10 µL. PVDF and stainless exterior, designed to be durable in tough lab setting Fully adjustable 1–10 µL range with fine decimal display Dual-position metal tip ejector supports D10 and DL10 tips Low pipetting resistance, especially in G-series (≈2 N force) PVDF body + stainless steel parts for chemic

Condition: new, Year of construction: 2026, neu 2026 090202 Mai 2026, Zwischenverkauf Türkei 3100 € 1.2 mm 100 mm 140 nm 8 Stk. 62 mm 0.75 kW 32 1/min 900 mm 450 mm 1350 mm 135 kg Haevy duty cast iron main frame Brake motor Foot pedal Adjustable lower roll 8 set of rolls Complete with stand Iaodpfswirx Dsx Aagot User manual in ENGLISH or GERMAN

Condition: new, MIG/MAG – Pulsed MIG/MAG – TIG DC HF – Electrode Single-phase power supply 1x230V greenWave® inverter technology Integrated wire feed unit 9 innovative welding processes from Böhler Welding 3.5" color LCD control panel Iaodpfx Ajyrfd Roagjt 220A at 35% (40 °C) 23.7 kg

Condition: new, Year of construction: 2026, - Capacity 1.2 mm - Extension 250 mm Ijdpfjgg Nrksx Aagjat - With 8 sets of rollers

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Iedpfx Astn Dijagoat 20 - 300 x 0,4 - 3,5 mm

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; Iaodjygxc Aepfx Aagjt automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm Iedpfjvphiyjx Aagjat * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: used, Year of construction: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm table surface area 2200 x 750 mm table load 3 t number of T-slots 6 T - slots - width 18 mm T - slots distance 120 mm spindle taper ISO 50 DIN 69871-B spindle speed max. 3000 U/min transmission ratio 1 speeds infinitely variable range 1 60 - 3000 U/min weight of the machine ca. 21,6 t feeds longditudinal/cross/vertical 0 - 5000 mm/min rapid traverse 15000 mm/min total power requirement 38 kw weight of the machine ca. 11 t Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Iaodpfsg E Utxjx Aaget Machine on: 41311 h Program run 13894 h The machine is already dismantled

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Width 125 mm Iaedpsd Eygpjfx Aagst

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Isdpfx Aed Ey R Neagoat Length: 410 mm Handle length: 210 mm Width 125 mm