Used Okuma L300-Mw-E for sale (69,639)

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005, Control system: OSP-E 100 L / Expansion Kit “M” Kit One Touch IGF Milling spindle carriage X/Y/Z/B, Counter spindle W-axis, Main spindle with C-axis, Counter spindle with C-axis, Turret carriage below X/Z axis, Max. turning diameter: 720 mm, Turning length: 2,000 mm, Distance between tailstock center and spindle center: 2,505 mm, Y-axis: 250 mm / +/- 125 mm, Main spindle speed: up to 3,500 rpm, Spindle power: 30 kW Turret below: 12-station without driven tool stations, Nco Dmnbyeyt Nvtoujt Turret below with steady rest, therefore only 9 stations instead of 12, Self-centering steady rest: 35 - 240 mm, Milling spindle: infinitely variable B-axis 0.001°, Magazine: 80-station, Mount: HSK 100, New Forkhart three-jaw chuck Ø 400 mm, value 12,000 €, Counter spindle without chuck, currently with arbors / delivery without arbors, Enlarged main spindle: 110 mm Ø 150/110 mm, Spindle nose: Size 11, 2-stage clamping pressure, Counter spindle as a hollow shaft motor, speed up to 3,800 rpm, Ethernet LAN interface, Renishaw in-process measurement, Dcedpfsy Uhfkex Am Reh Additional measuring system for Y-axis, Tool length: 450 mm instead of 350 mm, Door automation for both doors, Chip conveyor, Gravity belt filter with clean tank 900 liters, Supply pump, frequency-controlled up to 20 bar, The machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable carrier for the W-axis, including all hoses, was replaced. In October 2024, the linear guides X/Y/Z were replaced. Work performed by Okuma. Machine cleaned. Sheets and covers removed. 8th axis removed. Travel stand removed and lifted out of the machine. ATC removed and lifted out of the machine. All linear guides removed. Mounting surfaces of the Z-axis cleaned. New linear guide for Z-axis including shoes installed and tightened with the specified torques. New ball screw for Z-axis including bearing mounted and installed. Base plate of the travel stand installed and tightened with the specified torques or screwed onto the shoes. Lubrication lines connected. ATC including attachments installed and connected. New linear guides YA and XA installed and tightened with the corresponding torques. New ball screw YA including bearing installed. Travel stand installed and lubrication lines connected. Base plate XA placed and aligned. 8th axis placed and aligned. H1 turret installed - Install drive motor for the 8th axis - Assembly of 8th axis + new H1 and adjust geometry - Functional test of 8th axis and H1 - Run-in program for B-axis approx. 12 hours, then drain old oil from the 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various sheets - Install chuck - Adjust zero points - Check tool change

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C axis, Counter spindle with C axis, Y-axis slide above / milling spindle, HSK 63 tool holder, Infinitely adjustable B-axis as milling spindle, Djdpfx Amey Uhccs Rech Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Lower turret with 12 tool positions and powered tools, Interlite compact filter system 900 l, Extraction system, Spindle running time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure cooling, WZG measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 0607.1447, turning diameter over cross slide: 340 mm, turning length: 520 mm, turning diameter: 530 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance Y-axis: 260 mm, travel distance Z-axis: 520 mm, spindle motor power: 15,000 W, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,750 mm, total length: 3,000 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 5,000 kg, Equipment: documentation/manual, Control: OKUMA OSP5020L 12 tools Automatic chip conveyor Dcedpjy Stxqefx Am Rsh

Condition: good (used), mileage: 891 km, power: 100 kW (135.96 HP), first registration: 11/2024, fuel type: electric, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 3,660 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 3, total length: 5,930 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,300 mm, loading space width: 1,780 mm, loading space height: 1,910 mm, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear-view camera - Lane keeping assist - Fabric - Blind spot sensor Djdpjyx Upkefx Am Rech - Partition = Notes = Configuration: 4x2, Tare weight: 2520 kg, Gross vehicle weight: 3500 kg, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Rear-view camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 100 kW (134 hp), Fuel: Electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, 314 56kWh 220Km WLTP New Model Camera Mbux10 CarPlay 115-Kw-Fast Charging BPM-Free New/Unused!, Spare wheel, Tire type: All-season tires = Further Information = General information Number of doors: 1 License plate: V-74-PPX Axle configuration Tire size: 225/75R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,520 kg Payload: 980 kg GVW: 3,500 kg Functional Loading area height: 68 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 560 € per month (delivery van, 72 months); Ask for further information and conditions.

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, nominal power (apparent): 49 kVA, controller manufacturer: Okuma, controller model: OSP-P200M, table width: 400 mm, table length: 400 mm, table load: 400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 58,000 h, coolant supply: 30 bar, spindle motor power: 22,000 W, spindle nose: SK40 Big Plus, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained 3-axis Okuma MA-400HA horizontal machining center for sale The Z-axis module requires an overhaul. If more than 30% of the maximum rapid traverse speed is selected, the axis does not move. The machine is still in daily production and can be inspected at any time. The machine is offered including: - 100 SK tool holders (without tools) included - Renishaw OMP60 measuring system incl. probe and module (for tool breakage control and tool length measurement via mechanical touch sensor) Dcjdpjyvga Ujfx Am Rjh - Expanded control options (larger storage for offsets, tool corrections, axis mirroring, manual measurement, scaling up/down) - DNC-DT interface - 30 bar through-spindle coolant supply - 6 pallets incl. fixtures for machining round parts. Smallest fixture diameter 160mm, largest fixture diameter 370mm - Mayfran Consep 2000 II chip conveyor including nonwoven-free coolant filtration system

Condition: new, empty load weight: 690 kg, maximum load weight: 2,310 kg, overall weight: 3,000 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, total length: 5,374 mm, total width: 2,034 mm, total height: 830 mm, Year of construction: 2026, Humbaur Universal 3000, wood floor Our price: €4,750 including 19% VAT, 6.4% delivery fee, and vehicle documents. Description: A continuous floor panel on its hot-dip galvanized chassis and frame provides almost universal transport options. You load the Universal overloader using two ramp boards, which are also protected against corrosion. Adjust the boards to precisely match the track width of the vehicle. Then, simply slide the boards under the loading area. Secure the load for safe transport using seven lashing rings. You can upgrade to an aluminum floor instead of a wood floor, or aluminum side panels, and a tarpaulin with a frame can also be added at any time. Technical data: Trailer type: Two-axle Weight: 690 kg Gross vehicle weight: 3,000 kg Payload: 2,310 kg Loading area length: 4,000 mm Overall length: 5,374 mm Loading area width: 2,030 mm Overall width: 2,034 mm Overall height: 830 mm Loading height: 600 mm Tires: 10 inches Standard equipment: V-drawbar, hot-dip galvanized 13-pin plug and reversing light Djdpfjzbmxhjx Am Roch 18 mm thick floor panel 2 hot-dip galvanized ramp boards made of grating, stored under the loading area 2 support legs as standard on the 3500 kg models 7 lashing rings per side in the outer frame profile Perforations in the outer frame profile Rope winch with rope and 3-way adjustable bracket Automatic support wheel

Condition: good (used), Year of construction: 2016, operating hours: 1,556 h, fuel type: diesel, Genie GS 2669 RT Scissor Lift / Aerial Work Platform, 10m working height, 4x4 Kubota Diesel, year 2016. Inspection valid until 7-2026. Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a rotating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Dsdpfjy R Ddnex Am Rech 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 500 mm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details. • CNC: OSP U100L • Max turning diameter: 340 mm • Max turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increment) • Rapid feed: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Live tooling: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blow • Turning tool holder kit • 4 radial live tools • 4 axial live tools Technical Specification Taper Size VDI 40 Dcedpsy N Sabjfx Am Roh Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 126265, turning length: 900 mm, turning diameter over cross slide: 450 mm, turning diameter: 450 mm, spindle motor power: 22 W, spindle speed (min.): 38 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 100 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 935 mm, bar passage: 72 mm, total height: 2,600 mm, total length: 4,945 mm, total width: 2,690 mm, spindle nose: A2-6, swing diameter over bed slide: 630 mm, overall weight: 10,300 kg, spindle diameter: 100 mm, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in very good working condition and can be inspected under Power. Dcsdpeza U Ubjfx Am Rsh Control system OSP-P200L Spindle taper in live spindle HSKA63, 15Kw Sub spindle, B axes, tool magazine with 40 places, aprox 60 HSK 63 toolholder. half pallet with hard and soft jaws, Collets.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, Machine type: Horizontal machining center Manufacturer: OKUMA Type: MA-400HA Year of manufacture: 2008 Control system: OSP P200M Country of origin: Japan Delivery time: short-term, by arrangement 4-axis machining center, high productivity, including various accessories Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software packages - Touchsetter with length measurement and breakage detection - Work area shower Technical details: - Travels - Axes X-axis (column right-left) mm 560 Z-axis (table forward-backward) mm 625 Y-axis (spindle up-down) mm 610 B-axis 1° 0 - 360° Dcodpfxjy Tvrve Am Roh - Number of pallets: 2 (pallet changer for 2 pallets) - Pallet size (mm): 400 x 400 - Max. pallet load capacity (kg): 400 - Max. pallet workpiece dimensions (mm): 500/600 x 710 - Spindle speed (rpm): 15,000 - Main spindle (10min/cont): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions Optional: - Transport organization and execution - Machine delivery and installation - Machine commissioning

Year of construction: 1988, condition: ready for operation (used), Interface: RS232C, connected load: 21kVA, control system: Okuma OSP 5000 L-G, length: 2900mm, width: 1800mm, height: 1720mm, weight: 4.5t, ball screw of the X-axis has 0.2mm backlash, regularly maintained, with chip conveyor. An on-site inspection is possible. Dcsdpfxjy U Nq Uo Am Roh

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Dcodpfoy Rakkex Am Roh

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min Djdpfey Nmi Dex Am Roch • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma MB-66VA was manufactured in 2013. It features an X-axis travel of 1500 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm. The machine is equipped with a powerful 30 kW spindle, capable of reaching speeds up to 15,000 rpm, and has a tool magazine with 32 positions. If you are looking to get high-quality machining capabilities, consider the Okuma MB-66VA vertical machining centre we have for sale. Contact us for further details. Dcsdpfsy Ndp Isx Am Reh • Table size: 1500 × 660 mm Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 560 mm Dcjdpfxey Nb T Do Am Roh

Condition: used, Year of construction: 2014, Technical details: Dcedpfjxrwpdjx Am Reh x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg

Condition: excellent (used), Year of construction: 2026, color: yellow, Ramp, 2 m wide 160 x 200 x 18 cm Maximum load capacity: 7,500 kg = Further information = Year of manufacture: May 2026 Model year: 2026 Dedpfx Aey I Uyhsm Rech Payload: 2,500 kg Dimensions (L x W x H): 160 x 200 x 18 cm Technical condition: very good Visual condition: very good Contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2026, color: yellow, Ramp, 1 m wide 160 x 100 x 18 cm Maximum load capacity: 2,500 kg = Further information = Year of manufacture: May 2026 Model year: 2026 Payload: 2,500 kg Dimensions (L x W x H): 1600 x 100 x 18 cm Technical condition: very good Visual condition: very good For further information, please contact Arne Honingh. Dcsdpfjy I Uxkex Am Rjh

Condition: used, mileage: 154,900 km, power: 100 kW (135.96 HP), first registration: 02/2020, overall weight: 2,800 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2019, total length: 5,370 mm, total width: 1,928 mm, total height: 1,910 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 92982A Equipment lines and packages * MX0 BlueEFFICIENCY package Exterior * Drive type: rear-wheel drive * ZM0 version: panel van * Exterior mirrors, aspherical, both sides * F68 Exterior mirrors electrically adjustable and heated, both sides * Roof carrier mounting rails * Third brake light * Windscreen with integrated antenna * 150 A alternator * GE1 6-speed manual transmission (Eco Gear) * W50 Rear door without glazing (180° opening) * ZM0 Body type: standard panel van * Body type: extra-long Kombi * KB6 Fuel tank: main tank 57 liters * L16 Fog lights * Rear fog light * RR6 Spare wheel carrier under rear frame incl. jack * Sliding door to cargo/passenger compartment, right side * RS3 Steel wheels 6.5x16 * Daytime running lights Interior * Outside temperature display * Front passenger grab handle * Floor covering: TPO in passenger compartment Dcjdpfxox Alz Nj Am Rsh * Two electric window lifters * Rear cup holder * Front cup holder * T75 Grab handles on A-pillar * HH9 Climatic automatic air conditioning (Tempmatik) * LC4 Comfort lighting in passenger/cargo area * LC2 LED cargo area lighting * D50 Full bulkhead in cargo area * VY2 Seat cover/upholstery: fabric * S23 Cabin seats: dual passenger seat * SB1 Cabin seats: comfort driver’s seat * SE5 Cabin seats: driver’s seat with lumbar support * Window pillar trim * V30 Trim in cargo/passenger compartment: hardboard, half-height * Lashing rails in cargo area – sidewall at roof frame Multimedia * EN6 Audio system Audio 10 (radio with CD player) * JH3 Communications module (LTE) for digital services * EY5 Mercedes-Benz emergency call system * Service interval indicator Assyst * EL8 Two-way speakers, front Comfort and environment * FY7 3-button remote control for central locking * E07 Hill-start assist * EZ7 Assistance system: active park assist * JW8 Assistance system: Attention Assist (drowsiness sensor) * EY6 Assistance system: breakdown management * Assistance system: Crosswind Assist * MS1 Cruise control * F66 Lockable glove compartment * CL1 Steering column mechanically adjustable * CL4 Multifunction steering wheel incl. trip computer * Particulate filter * MR6 Low emission in accordance with Euro 6 * Power steering * Start/stop system * H20 Heat-insulating glazing * Central locking with remote control Safety * SA6 Airbag, passenger side * Driver airbag * Anti-lock braking system (ABS) * Brake assist * Brake system with ABS+ASR * Electronic stability program (ESP) * Seatbelt tensioners * Load securing/lashing rings * Seatbelt system with warning indicator (driver/passenger side) * Seatbelt system with warning indicator (driver side) * Immobiliser Other features * XA6 Gross vehicle weight upgrade to 3.05 t * IN3 Wheelbase 3430 mm * MG7 Engine 2.1 L - 100 kW CDI CAT Miscellaneous: This offer is non-binding. Errors and prior sale reserved. If a foreign currency is specified, it is based on the current exchange rate. The currency of the vehicle location applies as binding.

Condition: used, mileage: 154,900 km, power: 100 kW (135.96 HP), first registration: 02/2020, overall weight: 2,800 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2019, total length: 5,370 mm, total width: 1,928 mm, total height: 1,910 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 92982A Equipment lines and packages * MX0 BlueEFFICIENCY package Exterior * Drive type: rear-wheel drive * ZM0 version: panel van * Exterior mirrors, aspherical, both sides * F68 Exterior mirrors electrically adjustable and heated, both sides * Roof carrier mounting rails * Third brake light * Windscreen with integrated antenna * 150 A alternator * GE1 6-speed manual transmission (Eco Gear) * W50 Rear door without glazing (180° opening) * ZM0 Body type: standard panel van * Body type: extra-long Kombi * KB6 Fuel tank: main tank 57 liters * L16 Fog lights * Rear fog light * RR6 Spare wheel carrier under rear frame incl. jack * Sliding door to cargo/passenger compartment, right side * RS3 Steel wheels 6.5x16 * Daytime running lights Interior * Outside temperature display * Front passenger grab handle * Floor covering: TPO in passenger compartment * Two electric window lifters * Rear cup holder * Front cup holder * T75 Grab handles on A-pillar * HH9 Climatic automatic air conditioning (Tempmatik) * LC4 Comfort lighting in passenger/cargo area * LC2 LED cargo area lighting * D50 Full bulkhead in cargo area * VY2 Seat cover/upholstery: fabric * S23 Cabin seats: dual passenger seat * SB1 Cabin seats: comfort driver’s seat * SE5 Cabin seats: driver’s seat with lumbar support * Window pillar trim * V30 Trim in cargo/passenger compartment: hardboard, half-height * Lashing rails in cargo area – sidewall at roof frame Multimedia * EN6 Audio system Audio 10 (radio with CD player) * JH3 Communications module (LTE) for digital services * EY5 Mercedes-Benz emergency call system * Service interval indicator Assyst * EL8 Two-way speakers, front Comfort and environment * FY7 3-button remote control for central locking * E07 Hill-start assist * EZ7 Assistance system: active park assist * JW8 Assistance system: Attention Assist (drowsiness sensor) * EY6 Assistance system: breakdown management * Assistance system: Crosswind Assist * MS1 Cruise control * F66 Lockable glove compartment * CL1 Steering column mechanically adjustable * CL4 Multifunction steering wheel incl. trip computer * Particulate filter * MR6 Low emission in accordance with Euro 6 * Power steering * Start/stop system * H20 Heat-insulating glazing * Central locking with remote control Safety * SA6 Airbag, passenger side * Driver airbag * Anti-lock braking system (ABS) * Brake assist * Brake system with ABS+ASR * Electronic stability program (ESP) * Seatbelt tensioners * Load securing/lashing rings * Seatbelt system with warning indicator (driver/passenger side) * Seatbelt system with warning indicator (driver side) * Immobiliser Other features * XA6 Gross vehicle weight upgrade to 3.05 t * IN3 Wheelbase 3430 mm Dcodpfxoxwf Ilj Am Roh * MG7 Engine 2.1 L - 100 kW CDI CAT Miscellaneous: This offer is non-binding. Errors and prior sale reserved. If a foreign currency is specified, it is based on the current exchange rate. The currency of the vehicle location applies as binding.

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 300 kg, construction height: 1,950 mm, Technical condition: very good Dcodpfx Ajymt Hcsm Roh

Condition: used, functionality: fully functional, fuel type: diesel, operation weight: 8,100 kg, Year of construction: 1983, operating hours: 1,600 h, Equipment: cabin, Hamm DV8.21 tandem roller Year of manufacture: 1983 1,600 operating hours 8,100 - 9,200 kg Edge compactor Dcsdpfxozaqhws Am Reh Deutz engine

Condition: new, functionality: fully functional, machine/vehicle number: HR34783, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 6,100 mm, free lift: 2,005 mm, fuel type: electric, mast type: triplex, construction height: 2,630 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 3,600 kg, total length: 1,975 mm, drive type: Elektro, construction width: 1,116 mm, Electric 4-wheel forklift Chassis number: HR34783 Load center: 500 mm Fork width: 100 mm Fork thickness: 40 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Djdpfx Amsy R Hmfj Rjch Front tires size: 18x7-8 Front tires condition: New Rear tires type: Superelastic Rear tires size: 15x4.5x8 Rear tires condition: New Description: Machine fully workshop-inspected, cleaned, with new UVV safety check and inspection approved! Side shifter, 3rd valve, rear working lights, front working lights, full free lift, CE certificate, interior mirror, beacon, LED, seat, pedestrian warning light, reverse warning signal with broadband tone, 2 front and 1 rear LED working lights, yellow beacon - activated via ignition key, red seatbelt with restraint system, panoramic mirror, triple hose group, Accutouch mini-lever hydraulic control elements, mast tilt 5° forward/3° backward, tilt speed limitation, 1 degree/second with mechanical adjustment.

Condition: good (used), mileage: 8,251 km, first registration: 06/2025, fuel type: electric, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 3, total length: 7,050 mm, total width: 2,050 mm, total height: 2,650 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,910 mm, Year of construction: 2025, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Further Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Reversing camera - Lane departure warning system Dcedpfx Aoy Ar N Njm Rsh - Fabric - Blind spot sensor - Partition wall = Remarks = Configuration: 4x2, Payload: 622 kg, Unladen weight: 2,878 kg, Gross weight: 3,500 kg, Trailer load (unbraked): 750 kg, Trailer load on central axle (braked): 2,000 kg, Cabin type: single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Colour: white, Reversing camera, Lighting: halogen lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Blind spot sensor, Fuel: electric, Transmission: automatic, Power steering, ABS, ASR, Starter battery, Body type: extra high and long, Side wall panelled, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seats: 3, Seat arrangement: 1+2, Seat upholstery: fabric, Seat adjustment: manual, 320 204 hp 81 kWh MBUX10 carplay 300km WLTP 115kw-fast charging BPM exempt emission-free!, Tyre type: all-season tyres = Further Information = General Information Number of doors: 1 Registration number: V-34-LVX Axle Configuration Tyre size: 225/75R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: tyre tread left: 7 mm; tyre tread right: 6 mm Axle 2: tyre tread left: 5 mm; tyre tread right: 5 mm Weights Unladen weight: 2,878 kg Payload: 622 kg gross vehicle weight: 3,500 kg Functional Loading platform height: 68 cm Maintenance Inspection (APK): valid until 06/2029 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Financial Information Leasing price: €754 (excl. BPM) per month (panel van, 72 months); Please request further information and terms

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP Dcedpfx Ajh D Anajm Roh turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++