Used Junker Cylindrical Grinding Machine for sale (65,008)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements Hsdeuxfu Nspfx Aaxefn - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Technical data: Table: Hodjy T E Rzspfx Aaxofn Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 Hjdod Ih Dvjpfx Aaxsfn work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Overhauled machine according to Kellenberger new machine protocoll

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm control Siemens 840D total power requirement 46 kW weight of the machine ca. 6 t dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg Hjdpfxsw Inr Ns Aaxofn --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron Here are a few specifications for the machine: - Grinding length / max. workpiece length: 650 mm - Max. workpiece diameter: 400 mm (center-to-center distance: 200 mm) - Workpiece headstock: MK4, speed up to 600 rpm, continuously adjustable - Hydraulic NC tailstock with 150 mm stroke, MK4 - 2 external grinding spindles—1 wheel on the left, 1 wheel on the right—B- axis infinitely adjustable - Grinding wheel peripheral speed: 50 m/s - Grinding spindle motors: 7.5 kW each, toothed belt drive - Machine dimensions (without external peripherals): Width 4130 x Depth 2400 x Height 2300 mm - No rotating dressing device for CBN grinding wheels; only a holder for a stationary dressing tile

Condition: used, grinding diameter 250 mm grinding length 1000 mm centre height 125 mm Hfsdpfx Ajd Ih Egeaxen grinding wheel diameter 500 mm grinding wheel width 80 (100) mm bore 203,2 mm MK5 work piece spindle speed 20-400 U/min workpiece spindle swivable +/- 360 ° grinding head swivellable +/- 0 ° 0-9,99 mm/Ø 0-9,99 mm/Ø table swivelabel +/- 10 ° table speeds 0,02-6 m/min 130 kg max. workpiece weight -without tailstock 130 inkl. Spannung kg cross travel 270 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 5,5-7,5 kW weight of the machine ca. 2,7 t delivery: completely overhauled including a new control Examples: Accessoies: - Marposs auto-sizing-attachement - Balancing for the wheel. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 1989, grinding diameter 280 mm grinding length 630 mm centre height 145 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2,90x1,65x1,50 m TOS Hostivar BUAJ 28/630 – robust conventional universal cylindrical grinding machine The machine is a conventional universal cylindrical grinding machine designed Hedpfxoz Hqape Aaxsfn for precision grinding of cylindrical and conical workpieces. The BUAJ series is known for its robust construction and suitability for demanding industrial grinding applications. Technical specifications - Manufacturer: TOS Hostivar - Model: BUAJ 28/630 - Year of manufacture: 1989 - Machine type: Universal cylindrical grinding machine / centre-type cylindricalgrinder - Control: Conventional, non-CNC - Max. grinding diameter: 280 mm - Max. grinding length: 630 mm - Distance between centres: 630 mm - Max. workpiece weight between centres: approx. 70 kg - Centre height: approx. 145 mm - Workhead speed range: approx. 22.4–710 rpm - Grinding wheel: approx. Ø 400 × 50 mm - Main drive power: approx. 9.3 kW - Machine dimensions (L × W × H): approx. 2,900 × 1,650 × 1,500 mm - Machine weight: approx. 2,300 kg - incl. manuals

Condition: used, Distance between centres: 1000 mm Centre height: 250 mm B-axis: Accuracy 0.1" CNC brand: Kelco CNC model: 90 Left grinding wheel dimensions (OD x ID x width): Ø400 x Ø127 x 63 mm Right grinding wheel dimensions (OD x ID x width): Ø400 x Ø127 x 50 mm Workhead swivel: -30º to +120º Workhead taper: MK 5 Max. workpiece weight between centres: 150 kg Tailstock taper: MK 4 Tailstock quill travel: 50 mm Maximum peripheral speed: 32 m/s High-frequency internal grinding spindle: Ø120 mm High-frequency internal grinding spindle brand: WARNER model K 3.000 Main motor power: 7.5 kW Total power: 26.5 kW Max. Z-axis travel: 1,150 mm Max. Z-axis feed speed: 15 m/min Hfedexmg Ekepfx Aaxen Worktable rotation: 0º to 9º Max. X-axis travel: 320 mm Max. X-axis feed speed: 7.5 m/min Length: 3,600 mm Width: 2,000 mm Approx. weight: 5,000 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 510-1986, CYLINDRICAL GRINDER JOTES SCHAUDT A440X1500 Specifications Maximum longitudinal travel: 1500 mm Grinding diameter: 298 mm External grinding: Yes Internal grinding: Yes Dimensions (L x W x H): 5400 × 2400 × 1600 mm Weight: 4800 kg Operating hours: — Power-on hours: — Condition: Rebuilt Compliant with local standards: — Status: Under power Technical features - Grinding length [mm]: 1500 - Grinding diameter [mm]: 300 - Manual table displacement [mm/rev]: 10 - Table speed range [mm/s]: 0.01–5 - Smallest table stroke [mm]: 3 - Wheelhead swivel [°]: ±90 Hfsdpjw T Ti Djfx Aaxjn - Centre sleeve taper [Morse No.]: 4 - Grinding wheel dimensions [mm]: 500 x 63 x 203 - Spindle speed [rpm]: 32–500 - Grinding wheel drive motor power [kW]: 5.5 - Workpiece drive motor power [kW]: 0.75 - Hydraulic pump motor power [kW]: 1.5 - Grinding attachment drive motor power [kW]: 0.75 - Machine dimensions [mm]: L=5400 / W=2400 / H=1580 / Machine weight [kg]: 4800

Condition: used, Year of construction: 2006, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm weight of the machine ca. 3,5 t Machine completely overhauled with 12 months warranty Mechanically and optically like new Photos from the last overhauled machine with different options Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter -Internal grinding unit with belt drive Hedjt Ii Nbepfx Aaxofn -Tailstock with micro-adjustment -fine adjustment upper table -Paper belt filter SBP4 240l

Condition: good (used), grinding diameter 450 mm grinding length 600 mm centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min Hfjdpfx Aaexcblqjxjn grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 055 - 030.0221, Complete overhaul Year 2003 - Fanuc 16i-T Center height 175 mm and distance between centers 650 mm 2 external grinding wheels + B-axis fine adjustment Country of origin: CH Voltage: 3x400V Dimensions: 3680x2165x2100 mm Net machine weight: 5500 kg TECHNICAL SPECIFICATIONS Center height: 175 mm Distance between centers: 650 mm LONGITUDINAL SLIDE (Z) Maximum travel: 800 mm Speed: 0.001 – 10,000 mm/min Resolution: 0.0001 mm TRANSVERSE SLIDE (X) Maximum travel: 254 mm / SPW 650 Speed: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Maximum weight of workpiece clamped between centers: 80 kg TAILSTOCK Taper: Morse 3 Sleeve: Ø 50 mm Sleeve travel: 35 mm UNIVERSAL GRINDING WHEEL HEAD Left wheel dimension: 500 x 80 x 203 mm Right wheel dimension: 400 x 80 x 203 mm Grinding wheel head power: 12.5 kW Rotation speed: 3,200 min-1 Programmable cutting speed up to: 50 m/s B-axis travel: -15 to +195° B-axis indexing accuracy: 0.0001 ° LEFT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001 ° RIGHT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Subject to errors and omissions, the technical specifications are provided without commitment. Inventory No. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Completely overhauled: Mechanical, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings + adjustment. New paint. Workpiece head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of belts. New spindle bearings. New paint. Tailstock Disassembled, inspected, overhauled Hydraulics Disassembly, motor check, replacement of pipes, defective and worn parts. Check the hydraulic block. X-axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of the hydraulic piston, re-grinding of the tables. Z-axis Disassembly, re-grinding of the tables, replacement of worn and defective parts, overhaul of the hydraulic piston, new paint. Electrical cabinet Complete check, replacement of various relays. Paint Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories. Hjdpfjzbaz Asx Aaxjfn

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. Hjdpfx Aaezi Strexofn The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: used, Centre height 125 mm Distance between centres 400 mm Max. longitudinal travel 440 mm Grinding wheel 400x50x127 mm Hedpfsylcpkox Aaxjfn Max. grinding diameter 250 mm Max. table load 80 kg Max. workpiece weight between centres 80 kg Grinding wheel speeds: number (steps) 3, 1500-1800 rpm Angular displacement +/- 45° Workpiece spindle head: - stepless speeds 30-675 rpm - rotatable 90° Spindle taper 5 MT Tailstock taper 3 MT Table speed stepless 0.05-5.50 m/min External grinding wheel motor 3 kW Machine weight approx. 1500 kg

Condition: new, Year of construction: 2022, grinding diameter:260 mm grinding length:1000 mm centre height:130 mm dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad Hjdpfx Aog N Nh Deaxjfn table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

Condition: excellent (used), Year of construction: 2001, Description to follow! Hfjdpfx Aaezd E Tzoxsn

Condition: refurbished (used), Year of construction: 1992, machine/vehicle number: 92 0 20 10 19 031, total width: 1,900 mm, total length: 4,000 mm, total height: 2,000 mm, distance between centers: 1,200 mm, spindle speed (max.): 1,600 rpm, grinding spindle speed: 1,600 rpm, overall weight: 1,900 kg, input voltage: 380 V, We are offering this refurbished Karstens K19-1000 cylindrical grinding machine, manufactured in 1992. Voltage: 380 V Rated current: 48 A Hedjz Daliepfx Aaxefn Inrush current: 126 A Fuse in the supply line: 35 A Control current: 2.5 A Machine weight: 1.9 t If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is Completely machanically overhauled with grinding process Hedpfx Aevdk N Ejaxsfn and setup of one part. Original photo taken on the EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm Hodpszz S Awofx Aaxsfn centre height 175 mm

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 027.0149, CNC internal and external cylindrical grinding machine S33 CNC – undergoing refurbishment. Delivery time: approximately 14 weeks. Technical data and accessories as per the attached PDF. Photo = sample photo only. Hedozcuwbopfx Aaxefn

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Center distance: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg unsupported, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed adjustment 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table tilt: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Hedoiv Au Eepfx Aaxjfn Rough adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW / (5.5 KW = Option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor: 1.5 KW Lubrication motor: 0.1 KW Hydraulic tank: 80 liters Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with infinitely variable drive with a rotating and lockable spindle. New digital feed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse distances, compatible with the old Karstens feed control, with a color Siemens touch panel, scale in X and Z axis, manufacturer HEIDENHAIN. Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hjdpfxey U N Hio Aaxjfn Hydraulic preparation for arobo bezel

Condition: used, Year of construction: 1992, Technical details: grinding diameter: 50 mm grinding length: 100 mm centre height: 100 mm Hfodjy Nk Hyepfx Aaxsn centre distance: 200 mm

Condition: excellent (used), Year of construction: 2001, center height: 525 mm, workpiece weight (max.): 5,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 1,060 mm, The machine underwent a retrofit in 2024. Control: Siemens Sinumerik 840D. Hfedpfx Aew Ngm Uoaxjn

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Hodpfsya Dagex Aaxsfn Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Hfjdpjw U Ry Nsfx Aaxen Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.