Used Guida Impianti Slitting Line W. Nlt Slitter-Setup-Robot for sale (39,583)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: Hodpfxjy Ufgxs Aa Iju The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Hsdpfx Aszra Rqsa Iju Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station Hodpsz Ea N Refx Aa Iju • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Compact welding cell ABB Robotics IRB 1400 with manual rotary table and Fronius TPS 4000 welding machine. Overall dimensions: approximately 4000x2350mm Robot: ABB Robotics IRB 1400 Controller: S4-M98A Max. working radius: approximately 1450mm Payload: 5kg Hodpfx Aezmq U Nsa Iou Year of manufacture: 1998 Used – normal signs of wear and tear. Further details, article numbers and pictures available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city and postal code. Freight costs available upon request – please specify delivery address.

Condition: used, machine/vehicle number: 007901, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Hjdpfezwmbajx Aa Isu Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 3: Batch 1 edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 5: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 6: Single Edgebanders FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 7: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Hjdpfeuqdwxex Aa Iou Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Hjdpfjuq Sb Ssx Aa Ieu

Condition: used, mileage: 914,666 km, power: 309 kW (420.12 HP), first registration: 01/2006, fuel type: diesel, empty load weight: 7,990 kg, maximum load weight: 10,010 kg, overall weight: 18,000 kg, tire size: 315 / 60 R 22,5, axle configuration: 4x2, wheelbase: 3,550 mm, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, suspension: air, total length: 5,790 mm, total width: 2,550 mm, total height: 4,000 mm, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, cruise control, differential lock, low noise, parking heater, seat heater, spoiler, Vehicle location: Bovenden, Opticruise gearbox, Lg. House, Topline, 1x air seat, 2x recliner, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, burl wood decor, center console, electric roof, auxiliary heating, retarder, roof spoiler, side spoiler, lifting+lowering, differential lock, driving lights, work lights, air suspension, low noise G1, environmental badge green Hedjvhhd Ijpfx Aa Ieu Wheelbase: 3550 mm Body: Topline, Lowliner second engine approx. 300,000 km only run, Euro 3 engine with Twin Tec soot filter cat RFK-TT-N10 (PMK 2 green sticker), fifth wheel height 950 mm ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 9,500 kg, maximum load weight: 25,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/1999, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 87 m³, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 R 22,5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air-sprung, 1st axle liftable, lifting+lowering, ABS (anti-lock braking system), roller tarpaulin, catwalk, portal doors, aluminum side bumpers, storage box Superstructure: Walkingfloor with flaps left side approx.: 87m³ Side flaps with folding stanchions continuous left side Loading height side approx. 2540mm ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hedpfx Aaovhhfxs Iou - .

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Hjdpoiv R Hhjfx Aa Iou Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that convinces! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping possible upon request ⏰ 48-hour EXPRESS DELIVERY possible after down payment! The standard delivery time varies depending on stock levels between 1 working day and approximately 15 weeks. 🔧 Please note: Additional options can extend the delivery time. 📩 Ask the seller in advance whether your chosen options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire purchase ✔️ Leasing ✔️ Warranty programs 📞 Contact us – we will find the best solution for your budget! ✨ Strong. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three most common cabin sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard cabins in a modular way to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Top-class wet spray booth & drying system 📐 Technical data (internal / external): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air handling unit: 1350 x 2900 mm 🔧 Performance features: 🌬️ Vertical airflow over a full-surface ceiling air supply plenum – for even, dust-free painting 🚪 3-panel main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – fast heating to 60–80 °C in 8–15 minutes 🔇 Low-noise, high-performance fan with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress Hodpfx Aaeipvule Ieu 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99 % High-temperature heat exchanger made of special steel 🧼 Filter technology at the highest level: ✅ Pre-filter (tear-resistant, up to 100 °C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control over ventilation, heating, lighting and safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Air handling units can be flexibly positioned – can be mounted to the right, left or rear of the cabin ➕ Optional equipment (at extra cost): 🪟 Panoramic door – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Ex-protected lighting (Exproof) 🌪️ Ex-protected fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ The choice of special equipment can extend the delivery time. Please agree on your options with our sales team in advance. 🚧 Assembly costs are not included in the price. 📍 These depend on your location – we will gladly prepare an individual offer for you! ☀️ 2 YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. Hedpfeq Nxrxsx Aa Iou 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: good (used), Year of construction: 2011, Turbo Rotary Rotary filling line Hsdpfx Asr Uftrja Isu Serial: R0061192 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph

Condition: refurbished (used), ROLLFORMING LINE Hedpfxjg Rkv Es Aa Isu

Condition: used, Year of construction: 2014, for sale Machine types & quantities: - 1 unit: Linear transport system for 14 stations, type: LT-14-270 (original from sp280) - 1 unit: automatic loading station - 1 unit: new infeed station - 1 unit: double spiral kneader + powerbox Type: W240A No: 7402-978 - 1 unit: dough return station - 1 unit: lift and tipper, type: HK1200 - 3 units: 3 mixing bowls. Type: W240A - the frames and platforms for this line - 1 unit: weighing hopper - 1 unit: star hopper - powerbox - the small parts required for the line Inspection of the line is possible on site. If you have any questions or remarks, please feel free to contact us. The seller will load all goods carefully into the container/truck. The buyer will need to arrange transportation. Kind regards, Hedponnz Hwofx Aa Isu Leo Holland

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2016, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Equipment: ABS, Krone SD MegaLiner Flatbed Curtain Sider Edscha Sliding Roof Sliding Curtain Side Walls Internal Ref. No. for inquiries: 0226088 * Condition: very good * First registration: 02/2016 * ABS * 3 axles, air-suspended * BPW axles * Edscha sliding roof * Sliding curtain Loading area dimensions: Length: 13,600 mm Width: 2,470 mm Height: 3,000 mm Hjdpfoygzm Rex Aa Isu Tyres: * 1st axle: 445/45 R 19.5 30% air suspension * 2nd axle: 445/45 R 19.5 30% air suspension * 3rd axle: 445/45 R 19.5 30% air suspension ----Price: €4,900 + 19% VAT. For further questions, please contact us at the following numbers: We speak: German, English, Polish, French, and ????? Errors, omissions, and prior sale excepted.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2016, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Equipment: ABS, Krone SD MegaLiner Flatbed Tarp Edscha Sliding Roof Sliding Curtain Drop Sides Internal reference number for inquiries: 0126076 Hodpoygznzjfx Aa Iou * Condition: very good * First registration: 02/2016 * ABS * 3 axles, air suspension * BPW axles * Edscha sliding roof * Sliding curtain Cargo area dimensions: Length: 13,600 mm Width: 2,470 mm Height: 3,000 mm Tyres: * 1st axle: 445/45 R 19.5, 30%, air suspension * 2nd axle: 445/45 R 19.5, 30%, air suspension * 3rd axle: 445/45 R 19.5, 30%, air suspension ----Price: €4,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, Polish, French, and ????? Typos, errors, and prior sale excepted.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2016, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Equipment: ABS, Krone SD MegaLiner Curtain Sider with Edscha Sliding Roof and Drop Sides Ref. No. for inquiries: 0126079 * Condition: very good * First registration: 02/2016 * ABS * 3 axles, air suspension * BPW axles * Edscha sliding roof * Sliding curtain Loading area dimensions: Length: 13,600 mm Width: 2,470 mm Height: 3,000 mm Hjdpfxoygzpxj Aa Iou Tires: * 1st axle: 445/45 R 19.5, 30% tread remaining, air suspension * 2nd axle: 445/45 R 19.5, 35% tread remaining, air suspension * 3rd axle: 445/45 R 19.5, 35% tread remaining, air suspension ----Price: €4,900 + 19% VAT. For further questions, you can reach us at the following phone numbers: We speak German, English, Polish, French, and ????? Subject to typing errors, mistakes, and prior sale.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2016, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Equipment: ABS, Krone SD MegaLiner Curtain Sider Edscha Roof Sliding Curtain Sideboards Ref. No. for inquiries: 0725558 * ABS * 3 axles, air suspension * BPW axles * Edscha sliding roof * Sliding curtain * Front wall mounted fire extinguisher * Aluminum sideboards * Extendable entry ladder Internal loading dimensions: Length: 13,600 mm Width: 2,470 mm Height: 3,000 mm Tyres: * 1st axle: 445/45 R19.5 30% air suspension * 2nd axle: 445/45 R19.5 30% air suspension * 3rd axle: 445/45 R19.5 30% air suspension ----- Price: €5,900 + 19% VAT For further questions, you can reach us at the following numbers: We speak: German, English, Polish, French and ????? Hedpfxowz Adno Aa Iju Subject to errors, omissions, and prior sale.

Condition: new, Hiwin LMFA54 linear motor – iron-core primary part with water cooling, SN: 61960 – cable length: 95 cm, unused in opened original packaging, fully functional, scope of delivery as per photos. Hedpex Dubhefx Aa Isu

Condition: used, This listing is for the IKA Werke yellowline MSH Basic S2 magnetic stirrer The unit is in full working condition and is ready for immediate use Overview & Key Specifications This lab instrument is a heated magnetic stirrer—part of IKA’s Yellowline series—combining stirring and heating functionalities in one compact device Core Features (sourced from QuestPair & LabMakelaars listings): Maximum stirring capacity: approximately 5 L of water Temperature range: from room temperature up to 350 °C Stirring speed range: spans from 0 to 2,000 rpm Heating power: rated at 400 W Physical Specs: Heating plate diameter: around Ø 125 mm Overall dimensions (WxDxH): 160 × 210 × 105 mm Weight: approximately 2.3 kg Summary Table Feature Specification Stirring Capacity Up to 5 L of water Temp. Range Room temp – 350 °C Speed Control 0 – 2,000 rpm Heating Output 400 W Plate Diameter ~125 mm Dimensions (WxDxH) 160 × 210 × 105 mm Weight ~2.3 kg Hjdpfoxhd H Usx Aa Isu Additional Notes The Yellowline series is known for its robust, practical design and reliability in regular lab environments. With a 400 W heating capacity, it provides efficient heating across a broad temperature range—ideal for a variety of chemical or biological workflows. The 0–2,000 rpm stirring speed allows for flexible agitation, tailored to your sample or protocol requirements. Its compact dimensions and lightweight build (just 2.3 kg) make it ideal for benchtops where space is at a premium.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. Hodpfx Aowml S Eea Iou The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: used, first registration: 08/2016, Year of construction: 2016, H&W galvanized carriages for bridges up to 7.82 m long with forklift mount and lifting axle 3 available!! For all bridge lengths (7,150 / 7,450 / 7,820 mm)!! Forklift mount!! • Fully galvanized / anodized carriages • Very low • 2 x air-sprung 9-ton SAF axles • Lifting / lowering system Hedpswmn Uijfx Aa Isu • Tires 435/50 R 19.5 • Disc brakes • Lifting axle (1st axle)! - German carriages! - 1st hand - TÜV / SP: NEW! Subject to errors and prior sale.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2016, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Equipment: ABS, Krone SD MegaLiner Drop-side Curtainsider Edscha Roof Sliding Curtain Drop Sides Ref. No. for inquiries: 0825676 * First registration: 02/2016 * ABS * 3 axles, air suspension * BPW axles * Edscha sliding roof * Sliding curtain * Front wall fire extinguisher Cargo area dimensions: Length: 13,600 mm Width: 2,470 mm Height: 3,000 mm Tyres: * 1st axle: 445/45 R 19.5, 35%, air suspension * 2nd axle: 445/45 R 19.5, 35%, air suspension * 3rd axle: 445/45 R 19.5, 35%, air suspension ----Price: €4,900 + 19% VAT For further questions, you can reach us at the following phone numbers: Hsdpfxjw Umn Aj Aa Ieu We speak: German, English, Polish, French and ???? Errors, omissions and prior sale excepted.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021 ! Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management Hedpfx Aezfbi Ija Iju - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.