Screw compressor, compressor

Fabryka maszyn w Strzyżowie SCS 37-08A

Condition: good (used), Year of construction: 2019, operating hours: 5,800 h, functionality: fully functional, Timesavers 42 Series WRBW (Belt Sander / Rotary Brushes / Belt Sander) Year of manufacture: 2019 Njdpjz A Ucmjfx Abyodc Only 5,800 operating hours! Includes an ATEX exhaust system from Ulmatec. Inspection is also possible.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Ndedpfx Absy Rnb Doyoc

Condition: good (used), Year of construction: 2001, functionality: fully functional, Horizontal Boring Mill UNION T110 Year of manufacture: 2001 Travel axes: X: 1500 mm Y: 1250 mm (total vertical adjustment) 0 mm - lowest position of the spindle center to the table surface Z: 1000 mm W: 550 mm (quill movement) B: 360° infinitely variable Spindle diameter: 110 mm Transmission steps: 2 Ndjdoy Rpm Uspfx Abyoc Max. spindle speed: 4000 rpm Rapid traverse: 15 m/min Spindle taper: SK 50 Clamping table surface: 1000 x 1250 mm T-slot width: 22 mm Height of clamping surface above floor: 1050 mm Max. table load: 6 t Total weight (complete): approx. 13.5 t Control system: Heidenhain TNC 426 Electronic handwheel Various tool holders can be purchased additionally.

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 2,500 rpm, number of axes: 5, This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Rotary table clamping surface: 2200 x 1800 mm Extra Information Working spindle diameter: 130 mm Ndodpfeyar D Hsx Abyoc Technical Specification Taper Size ISO 50

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TM 4 is a highly stable, T-frame milling center with a large rotary table and a large working area diameter. It offers maximum flexibility and is ideally suited for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24 months warranty Technical specifications: Control system: • HEIDENHAIN TNC 7 digital control system • HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: Njdpfx Aeq I Nkbebyedc 60-position chain magazine with double gripper Chip disposal: 2 x articulated belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer for you.

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, spindle speed (max.): 700 rpm, feed length X-axis: 15,000 mm, feed length Y-axis: 5,150 mm, feed length Z-axis: 1,600 mm, total width: 6,400 mm, total length: 19,300 mm, total height: 10,370 mm, feed length W-axis: 2,000 mm, spindle diameter: 250 mm, table height: 400 mm, table length: 8,000 mm, table width: 5,665 mm, overall weight: 137,000 kg, year of last overhaul: 2006, grinding spindle motor power: 83,000 W, type of input current: three-phase, We offer for sale a Škoda W250H floor boring machine. This machine is designed for machining heavy and large-sized components for the energy, shipbuilding, metallurgical, mining, and machine production industries. The machine is equipped with a Siemens Sinumerik 840D control system, enabling the execution of demanding boring, drilling, and milling operations. Complete technical documentation is available. Upon request, we can provide additional photos, videos, and information regarding the machine's equipment and technical condition. Standard equipment: Tool and measuring instrument storage rack, mounted on the spindle box. Njdpfx Abjzrwq Isysdc Optional equipment: Cooling system with coolant Rotary table 4000x3550 3 x angular heads

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 Ndsdpfx Aowhk E Hobysc MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, The FEMCO BMC 110 T2 is a classic T-frame boring machine designed for heavy-duty and high-precision machining. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 20 bar Nedpfx Aexc Hphebyedc Tool changer: 60-position chain magazine with dual gripper Chip disposal: Dual articulated belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Support bearing: Spindle support bearing ø 250mm Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.010 mm Contact us – we will be happy to advise you and prepare a customized offer.

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER Ndodpfx Asxcqrgobyjc X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 70 mm MAX ADMITTED LOAD: 750 Kg/m WORKING AREA: 3000 x 1500 mm SOURCE: IPG Fiber 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 13000 Kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,118 h, laser power: 6,000,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details. • Gesamtantriebsleistung: ca. 11,5 kW (nur Maschine ohne Zusatzausstattung) • Elektrische Ausführung: nach VDE-Richtlinien, Spannung 400 V ± 10 %, 50 Hz mit Nullleiter • Connected load: 400 V / 50 Hz / 12 kVA • Main fuse: 3x160 A • Fehlerstromschutzschalter in der Netzeinspeisung nur als allstromsensitive Ausführung mit 300 mA zulässig • Steuer- und Ventilspannung 24 V-DC • Multitasking Prozesssteuerung mit großem Bedienterminal und übersichtlicher Menüführung • Schaltschrank und Bedienpult frei aufgestellt • Lackierung Grundmaschine: lichtgrau - RAL 7035 • Lackierung Abdeckungen: rotviolett - RAL 4002 • Minimale Abschnittlänge: im automatischen Betrieb ab 10 mm • Mindest-Reststücklängen: ca. 180 mm • Verfahrweg des Nachschubgreifers: 3.000 mm Ndsdjyrfbcepfx Abysc • Gewicht des Schneidgutes: bis max. 4.000 kg • Länge der Maschine: 5.600 mm • Breite der Maschine: 4.300 mm • Höhe der Maschine: 2.550 mm (2.150 mm für Transport), Anlage zum Transport geteilt • Gewicht: ca. 3.100 kg • Materialauflagehöhe: 800 mm • Sägebandspannung: hydraulisch, elektrisch überwacht • Kühlmittelbehälter Fassungsvermögen: ca. 60 l • Kühlmittelpumpe Fördermenge: 40 l/min bei 2,5 m Förderhöhe, Leistung: 115 W • 3RD CNC 6006, Motor 13,1 kW, Spindeldrehzahl 50-5000 U/Min. • Tisch 6100x580 mm, ausgeführt mit Späneförderer • Verfahrwege X/Y/Z 6100x600x450 mm • Pendelbetrieb (Be- und Entladen während Maschine produziert) • Standardausführung inklusive: 15,4” Touchscreen PC und Pentium 5 PC, 8GB RAM, 120GB Festplatte • Grafische Programmierung • Automatische Werkzeuglängenvermessung • Bedienpult extern auf Linearführung • Verkleidung um Maschinenkopf • Laser-Gebietssensor (Pendelbetrieb) • Kühlanlage mit Emulsion • Ethernet-Anschluss für Teleservice • Gemäß Angebot vom 26. Januar 2022 • Inklusive: Tisch 70 mm abgesenkt und Säule 100 mm verlängert, Abstand Spindel-Tisch 295-745 mm • 16-fach Werkzeugwechsler • Elektronisches Handrad für manuelles Verfahren der Achsen • Kühlung durch die Spindel, Arbeitsdruck 4 Bar, ausgeführt mit Drehzufuhrventil geeignet für Kühlung mit nur Luft • Automatisches Tastsystem für die Höhe des Werkstücks (Z-Reader) • Komplette DrillCam CAD/CAM Software zum Konvertieren von 2D DXF, DWG, DSTV, NC, NC1 oder 3D STEP Dateien zu Maschinenprogrammen, auf der Steuerung der Maschine installiert • Safety: Light barrier system • Laser hours: 20,118 h • Condition/Service: Completely freshly serviced • Enclosed machine frame with integrated laser unit • Gantry drive combined with linear drives • Automatic pallet changer • Longitudinal conveyor belt • Cross conveyor (waste conveyor) • Work area lighting • PCS (Process Control System) • Positioning laser diode • Oil spray system • HI-LAS • HI-LAS PLUS • PMS (Plasma Monitoring System) • Trumpf Laser: CO2 laser TFL 6000 • Cooling unit • High-frequency excitation • Laser power control • Programmable cutting gas pressure setting • DIAS III • AutoLas Plus • Oil spray system for safe thick sheet metal processing • Automatic shut-off • Programmable power cycles • Laser logbook function