Used Deep Hole Drilling Imsa Mf 1000 Bbll for sale (17,130)

Condition: excellent (used), Year of construction: 1995, overall weight: 4,000 kg, total height: 300 mm, total length: 4,500 mm, total width: 1,000 mm, T slotted bed plate STOLLE - 4500 x 1000 Cast iron floorplate 4500 x 1000 x 300 mm Floorplate Length: 4500mm Floorplate Width: 1000mm Gedezc If Espfx Ai Njuc Height: 300mm No. Of T-slots: 4 Distance from T to T-slot / Jump:250mm T -slot size: 30mm Weight a plate approx.: 4000kg Number of matching pieces: 1 Length: 4500mm Width: 1000mm Height: 300mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1992, number of straightening rollers: 21, total length: 3,200 mm, straightening roller diameter: 30 mm, total height: 2,100 mm, total width: 2,000 mm, sheet thickness (max.): 6 mm, Decoiler Max. width 350 mm Clamping area coil internal  mm Coil diameter 1500 mm Work load 1000 Kg Straigtner Width 250 mm Roll diameter 30 mm Number off rolls 21 units Working speed 40 M/Min   Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Godpfx Aiozcu S Se Nouc Length:3200mm Width:2000mm Height:2100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter: 350 mm, turning diameter over bed slide: 350 mm, turning diameter over top slide: 196 mm, center height: 175 mm, turning length: 650 mm, Model: Multiturn 1000 Control: Fanuc Oi-TC Year: 2007 S/No.: N91013 Swing Over Bed: 350mm Swing In Gap: 535mm Swing Over Top Slide: 196mm Distance Between Centres: 650mm Spindle Speeds: 1-3500 RPM (3 Ranges) Spindle Bore: 42mm Motor: 7.5 KW Machine with: 150mm 3 Jaw Chuck Duplumatic 8 Station Turret Turret Tool Holders Tail Stock Guodpjy N Uk Nsfx Ai Nsc Coolant Pump

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 450 mm, table length: 1,200 mm, spindle nose: BT40, Dugard Eagle 1000 Vertical Machining Centre Model: 1000 VMC Year: 2005 Control: FANUC Oi-MD Table Area: 1200mm x 450mm ‘X’ Traverse: 1020mm ‘Y’ Traverse: 510mm ‘Z’ Traverse: 510mm Max. Spindle Speed: 8000 RPM Spindle Taper: BT 40 ATC capacity: 20 station Gsdpfx Aisy N Ukco Neuc Machine with: Swarf Conveyor

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) Gusdexapftopfx Ai Noc - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Gjdszcnnajpfx Ai Njuc Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2022, overall weight: 790 kg, chuck outer diameter: 1,000 mm, bolt circle diameter: 145 mm, total height: 140 mm, total width: 1,000 mm, total length: 1,000 mm, Metal cutting Tooling TDG Solutions - PGI 1000 MACH-ID 9418 Make: TDG Solutions Type: PGI 1000 Year: 2022 Diameter: 1000mm 4 chuck: Yes Spindle bore:145mm Max. speed: 611Rpm Length: 1000mm Godpfx Aiezcnm Ae Nsuc Width: 1000mm Height: 140mm Weight: 790kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MACHINING CAPABILITIES: - Height (thickness) of useful Z-axis travel: 225 mm - Length of useful X-axis milling travel: 3860 mm - Width of useful Y-axis milling travel: 1930 mm - Work area: X = 3090 mm Y = 1530 mm Z = 85 mm, depending on the clamping system, see machine technical diagrams. - Maximum travel speeds: X-axis: 25 m/min Y-axis: 25 m/min Z-axis: 15 m/min MACHINE COMPOSITION: - Vacuum table with grooved length x width: mm Grid pattern with 30 x 30 mm grid spacing Matrix table with fine grid, axis dimensions 30x30 mm (instead of 60x60 mm grid) - 2 Vacuum pumps 250 m3/h - Chip evacuation mat - X-axis movement via pinion and rack, Y & Z-axis movements via screw and sleeves (high-quality precision linear guides with automatic lubrication) • Milling/routing unit 10 kW - Tool holder connection type: HSK F63 Gusdpfx Aiezcvvre Nec - Variable speed 1000–24,000 RPM, controlled by a frequency converter Rotation direction: right/left The routing spindle is connected to the Z-axis mounting plate via linear guides and moves along 2 vertical linear guides. The tool clamping is done using an HSK F63 cone. Tool retention is controlled by 3 sensors. This ensures safe operation. The tool clamping cleaning is pneumatic. Drive: HF 3-phase motor controlled by a frequency converter Bearing: ceramic Spindle cooling: by air - Extraction hood around the perimeter - On-board tool magazine, 11 positions - Maximum tool diameter: 100 mm - Maximum tool height: 153 mm - Distance between clamping jaws: 110 mm Please consult the machine configuration for more information on specifications. • DH 16 4H 2S Drilling unit: Unit with 12 vertical heads and 4 horizontal heads; 2 slotting saws; 1 in the X direction and 1 in the Y direction Vertical drilling system with 12 spindles. 7 spindles in the X direction and 5 spindles in the Y direction. Independent operation of each spindle is possible. Continuous speed up to 6000 RPM, horizontal drilling system with 4 spindles. 1 double spindle in the X direction, 1 double spindle in the Y direction. • Control panel: - Windows PC - Programs (Software): F4 Design, F4 Nest OTHER FEATURES: - Total electrical supply: 400V. 3Ph.+N+T 50Hz IN 56-63 A - Installed power: 26kW - Pneumatic supply: 8 Bars - Average consumption: 350 Nl/min - Centralized extraction ports - CE standard marking Lockable disconnector switch, emergency stops

Condition: used, Year of construction: 2020, total height: 2,100 mm, total length: 2,000 mm, total width: 2,500 mm, Colour: Grey Price: On request - Machine available from: 2025-12-15 - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 975 - Working range Y [mm]: 1321 - Working range Z [mm]: 243 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling unit: Yes - Software: Biesse works - Saw unit present: Yes - Safety feature: - Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (l x w x h) - Transport packages [pcs.]: 2 Financial information Gsdpox Ad R Nsfx Ai Njuc VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 Gujdpfx Aieyr Rm Re Njc - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), - Dimensions: 2050x2800x2400 mm - Electric oven - 6 openings - 3 decks - With integrated loader/elevator - Baking surface: 6 m² - Power: 43 kW - Voltage: 400 V Godpfx Aiswxmrde Njuc Refurbished equipment: the equipment is prepared upon order, with agreed pick-up and return times. Please request pricing after revision.

Condition: excellent (used), - Fryer model: IEF 224 - Serial number: J00015 - Dimensions (W x D): 600 x 610 mm - Tank dimensions: 2 x 200 x 400 mm - Capacity: 16 L (2 x 8 L) - Electronic temperature control - 2 baskets - Drain tap with valve - Power: 2 x 9 kW - Voltage: 400 V - Fryer model: AEF 224.150 Gedpjwyby Ejfx Ai Neuc - Dimensions: 600 x 700 mm - Tank dimensions: 400 x 400 mm - Capacity: 16 L - Electronic temperature control - Drain valve with tap - Power: 18 kW - Voltage: 400 V

Condition: good (used), Year of construction: 2012, Riggs 1000 Transfer pump 2012, stainless, filling range from 125ml to 1200ml, they pump directly from cooking kettles, tote bins, mixing vessels or IBC, provide damage free transfer of hot or cold liquid, semi liquid and suspended solid products Gedpsy R Ei Eefx Ai Nsuc

Condition: new, functionality: fully functional, mileage: 1 km, power: 11.03 kW (15.00 HP), color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, operating hours: 1 h, Equipment: additional headlights, hydraulics, Günter Grossmann GG1000 kubota Dankzij een nauwe samenwerken tussen Günter Grossmann en Kubota is de nieuwe GG1000 graafmachine onststaan. Model GG1000 is een geweldige machine voor de meest veeleisende bouw-, elektrisch en hydraulische bedrijven. We garanderen service na de garantie. De graafmachine wordt vervaardigd op basis van solide Europese technologie Standaarduitrusting is een 38 cm brede graafbak. Extra accessoires voor de machine kunnen aangekocht worden. transport kosten uitsluiten op aanvraag leas besprekbaar PECIFICATIES Model: GG1000 Merk: Günter Grossmann Gewicht: 1000kg Capaciteit graafbak: 0.025 m³ Afmetingen graafbak: 2000mm, 380mm, 500mm Motor: Japan – KUBOTA Motor vermogen: 11.8 kw/2300r/min Hoofd pomp: Wanye Hydraulic Zwenkmotor: Dali Rijmotor: Dali Rijsnelheid: 1,5km/h AFMETINGEN Afmetingen (LxBxH): 2770x896x1490 mm Wielbasis: 770mm Lengte rupsen: 960mm WERKBEREIK Max. graaf diepte: 1650 mm Max. graaf hoogte: 2610 mm Max. dump hoogte: 1850 mm Max. graaf radius op de grond: 2890 mm Rotatie radius: 360° Max. Upgrade height of bulldozer blade: 345 mm Max. graaf diepte graafbak: 255 mm evt Bij te bestellen ACCESSOIRES Grondboor Grijper Graaftand Hark Smalle bak 200 mm Smalle bak 380 mm Niveleerbak 500mm Niveleerbak 800mm SnelkoppGünter Grossmann GG1000 kubota Dankzij een nauwe samenwerken tussen Günter Grossmann en Kubota is de nieuwe GG1000 graafmachine onststaan. Model GG1000 is een geweldige machine voor de meest veeleisende bouw-, elektrisch en hydraulische bedrijven. We garanderen service na de garantie. De graafmachine wordt vervaardigd op basis van solide Europese technologie Standaarduitrusting is een 38 cm brede graafbak. Extra accessoires voor de machine kunnen aangekocht worden. transport kosten uitsluiten op aanvraag PECIFICATIES Model: GG1000 Merk: Günter Grossmann Gewicht: 1000kg Capaciteit graafbak: 0.025 m³ Afmetingen graafbak: 2000mm, 380mm, 500mm Motor: Japan – KUBOTA Motor vermogen: 11.8 kw/2300r/min Gedpfx Aiogi Rxkj Nouc Hoofd pomp: Wanye Hydraulic Zwenkmotor: Dali Rijmotor: Dali Rijsnelheid: 1,5km/h AFMETINGEN Afmetingen (LxBxH): 2770x896x1490 mm Wielbasis: 770mm Lengte rupsen: 960mm Bonwqxjysh WERKBEREIK Max. graaf diepte: 1650 mm Max. graaf hoogte: 2610 mm Max. dump hoogte: 1850 mm Max. graaf radius op de grond: 2890 mm Rotatie radius: 360° Max. Upgrade height of bulldozer blade: 345 mm Max. graaf diepte graafbak: 255 mm evt Bij te bestellen ACCESSOIRES Grondboor Grijper Graaftand Hark Smalle bak 200 mm Smalle bak 380 mm Niveleerbak 500mm Niveleerbak 800mm Snelkoppeling Breekhamer

Condition: new, color: yellow, overall weight: 975 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, digging bucket width: 340 mm, Year of construction: 2023, Equipment: additional headlights, GG JAPAN 1000 Gunter Grossman & Kubota The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable track undercarriage 6. Articulated Boom pro 7. Hidden driving motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy tracks for a pleasant ride.. 14.2 driving speeds We have all spare parts for machines of our brand available throughout Europe Price 11990 EUR (excl. VAT) (Including: Excavator GG1700 bucket 380 mm) SPECIFICATIONS Model: Japan 1000 Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated Power: 11.8kw/2300r/min Guodpfsh Uymysx Ai Noc Main pump: Parkier Swing motor: Eaton Drive motor: Eaton Driving speed: 3 km/h Stick: Movable sideways Driving speed: two speeds Drive Motors: Hidden Snakes in the style: Hidden DIMENSIONS Total dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770mm Total length of the track 960 mm WORKING RANGE max. Digging depth: 1650 mm max. Digging height: 2610 mm max. Digging radius on the ground: 2890 mm Turning radius: 360° max. Dozer Blade Upgrade Height: 345mm max. Dozer blade digging depth: 255 mm

Condition: new, functionality: fully functional, power: 11.03 kW (15.00 HP), fuel type: diesel, color: yellow, overall weight: 1,020 kg, empty load weight: 1,020 kg, operation weight: 1,020 kg, lifting height: 2,610 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Gunter Grossmann & Kubota Japan 1000 Y The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable crawler chassis 6. Articulated boom pro 7. Hidden travel motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy crawler tracks for a pleasant ride .. 14 servo joystick control Gedpfsvuk Uvsx Ai Nsuc 15.2 travel speeds We have all spare parts for machines of our brand available throughout Europe SPECIFICATIONS Model: Japan 1000 Y Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated power: 11.8 kw/2300r/min Main pump: Parkier Swing motor: Eaton Travel motor: Eaton Travel speed: 3 km/h Digging arm: Movable sideways Travel speed: Two speeds Drive motors: Hidden Style hoses: Hidden DIMENSIONS Overall dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770 mm Total track length 960 mm WORKING RANGE Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. digging radius on the ground: 2890 mm Turning radius: 360° Max. upgrade height of bulldozer blade: 345 mm Max. digging depth bulldozer blade: 255 mm

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 32 mm throat 285 mm bore stroke 160 mm turning speeds 55 - 1450 U/min taper MK 3 table-size 500 x 370 mm Gsdszcqzcspfx Ai Njuc feed 0,1-0,2-0,3 m/min total power requirement 1,6 kW weight 400 kg dimensions 1000 x 700 x 1850 mm Features: - Automatic feed - Coolant system - Continuously variable speed control - Adjustable depth stop - Drill chuck

Condition: new, bore capacity in steel (diameter) 28.0 mm throat 320 mm bore stroke 150 mm morse taper 3 MK table: 500 x 350 mm turning speeds 75.0 - 3010 U/min total power requirement 1.35 / 1.70 kW weight 290 kg range L-W-H 600 x 700 x 1900 mm Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use Guodpfx Aexaba Asi Noc - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Gusdpjy D Hr Uofx Ai Nsc Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: excellent (used), Liebisch Constamatic S1000M-TR Corrosion Testing System Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: S1000M-TR (4BVL) Made in Germany Corrosion testing system / salt spray chamber for performing salt spray, condensation water, and cyclic climate tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1255 mm Test chamber dimensions: approx. 1435 x 780 x 600 mm Temperature range, test chamber: ambient temperature to 50 °C Temperature range, humidifier: ambient temperature to 70 °C Test solution reservoir: approx. 100 liters Voltage: 230 V Frequency: 50 - 60 Hz Phases: 1~ Rated current: 12 A Power consumption: 2700 W Test methods DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Temperature control for test chamber and humidifier Salt spray testing Condensation water testing Cyclic climate tests Pressure regulator Manometer Test specimen holders and test rods Reservoir for test solution Large insulated hinged lid with gas springs Condition Used equipment from industrial application. Optical condition according to the images. Interior with visible deposits and color changes due to test media. Control unit is active, the device can be switched on. A complete technical functional test under real test conditions was not carried out by us. Inspection possible by arrangement. Scope of delivery: see images. Loading can be arranged. Gujdpezcdyxsfx Ai Nsc All information is provided to the best of our knowledge based on nameplates, manufacturer's markings and available information. Subject to errors and changes.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Switch-on hours (date 18. May 2026): 28.970 h Technical details turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m * Control WEILER D3 * Chip conveyor Guedpfxozcmcce Ai Nec * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: good (used), DRILLING CAPACITY STEEL E335 (ST 60) [MM]: 14 TAPPING PERFORMANCE STEEL E335 (ST 60) [MM]: M 14 SPINDLE, SHORT: MT 2 DISTANCE SPINDLE TO COLUMN [MM]: 250 TABLE CLAMPING AREA [MM]: 370 x 300 DISTANCE SPINDLE - TABLE MIN./MAX. [MM]: 125 / 455 COLUMN DIAMETER [MM]: 90 Gujdpfxoy D Ebne Ai Noc Z-TRAVEL OF SPINDLE [MM]: 100 FEED: manual POWER [KW]: 0.6 / 0.95 POWER 2 [RPM]: 0.6 / 0.95 MOTOR 1 [RPM]: 750 / 1500 MOTOR 2 [RPM]: 750 / 1500 SPINDLE RPM RANGE | OPTION 1 [RPM]: 125 – 2,400 SPINDLE RPM RANGE | OPTION 2 [RPM]: 225 – 4,300

Condition: ready for operation (used), Siemens 1HU1053-2 tacho 20V at 1000 rpm, load 13.3 Ohm, used, normal signs of wear, 100% functional, scope of delivery as per photos. Guedpfx Ajx Dvfbji Njc

Condition: ready for operation (used), Fanuc A20B-1000-0850 / 09B board SN:YUY666-2544, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpfxox Erh Ro Ai Nouc

Condition: ready for operation (used), Parvex LC310THR0004 servomotor SN: 8340 with Heidenhain ROD 426 1000 02S12-03 ID: 376 846-79 encoder SN: 16078305, used, in good condition, 100% functional, delivery as shown in the photos. Godpfx Aoxtwa Eoi Njuc