Used Cnstamp Press Brake Tool For Weinbrenner for sale (59,243)

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Optional extras: Software D-BEND for 3D bending simulation and alignment R axis CNC (X = 650mm), X, R (double guide, aluminium) Upper dies, CE Lower dies, CE Lower dies, DURMA company Fast die locking system CNC-controlled crowning, with motor Rodsfiqdcepfx Almjcb Backgauge (1000 mm) - Rear guard with light barrier Oil cooler Additional stop finger and additional front support system Sheets, sliding Special Overseas Packaging 8 meter press brake 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000m², the Durmazlar Group and its D

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Rjdofiryfjpfx Almecb Central lubrication system Oil cooler Additional stop finger and additional movable support arms Special packaging for overseas transports

Condition: new, Year of construction: 2024, pressing force: 175 t, working width: 3,050 mm, A high-performance DURMA press brake type AD-S 30175 is for sale. With its extensive standard equipment and selected options, it is ideally equipped for the demanding tasks involved in metal processing. Standard equipment: Capacity and size: 3050mm x 175 tons Installation height: 530mm Projection: 450mm Stroke: 265mm Axis control: Precise control with 4 axes. Safety systems: Manuel F. AKAS FPSC safety system, CE F.AKAS BVLT light barriers and safety cages provide maximum protection. Backgauge: Servo motor backgauge & linear guide & ball screw system for maximum precision. Tool clamping system: European standard for fast and safe tool changes. Front arms: Movable, supports the handling of different workpiece sizes. Selected options: Rjdsrx Rkujpfx Almocb Control unit upgrade: SKY 22 - 3D, for even more detailed bending operations and 3D visualization. Crowning: Motorized adjustment, for even more precise bending results. Backgauge: Extended with motorized X, R-axis backgauge (X=650mm), increases flexibility and precision. Quick clamping: Manual quick clamping for more efficient tool changes. This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency and safety. For more information or if you are interested, please contact us. Don't miss the chance to expand your production capacity with this high-quality machine.

Year of construction: 2024, condition: new, Bending performance 2200 KN Bending length 3050 mm Continuity betw. d. stands (mm) 2600 mm Stroke length (mm) 265 mm Throat depth 410 mm Height 530 mm Rodpfxjd Afxks Almjcb Operating speed (mm/sec) Y 10 mm / sec Motor power 18.5 KW Operating speed (mm/sec) X 500 mm / sec Operating distance R (motor operated) 350 mm length 4250 mm Width 1700 mm 2750 mm Weight 11500 kg Standard equipment: Y1, Y2, pressure beam - axes (individually controllable) X, R - axes CNC controlled. Control unit - CNC ModEva 15t Servomotor back gauge & linear ball circulation spindle system with Rails (x-R) (AL) CNC controlled crowning European tool clamping system Mobile support arms (with T-slot and stopper) Specially designed hydraulic block and valves for worldwide standard electrical equipment according to global standard Special Accessories: Control DELEM DA-66T (2D graphic, 3D visualization) Bend - 66.5 (one) = upper tool H thereof in pitch bend - lower 4V that (one of them in Division) D-bend 3D CAD /.

Condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Optional extras: Software D-BEND for 3D bending simulation and alignment R axis CNC (X = 650mm), X, R (double guide, aluminium) Upper dies, CE Lower dies, CE Lower dies, DURMA company Fast die locking system CNC-controlled crowning, with motor Backgauge (1000 mm) - Rear guard with light barrier Oil cooler Additional stop finger and additional front support system Sheets, sliding Special Overseas Packaging 8 meter press brake 800 tons. Rodpfx Aljfiqa Rsmjcb With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA Maschi

Condition: excellent (used), Year of construction: 2017, TruBend 5130, including Toolmaster, manufactured in 2017. 130 tons, 3 meters. Rjdoy Tmnhepfx Almecb

Condition: used, Year of construction: 2001, Amada HFE 80-25 SL Hydraulic Press Brake. S/No. VO11137 (2001), Remanufactured JTES 2018 Rcedpey D Rhyofx Almsb Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, Bystronic Xpress 80/2100 Hydraulic Press Brake. S/No. Xpress 22334EU (10/2022), Max Press Force 800KN, Max Working Length 2100mm, Max Stroke 200mm, Machine Weight 6000kg Rjdpfey D Rbaox Almscb Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake. S/No. XACT 22040SE (02/2022), Max Press Force 1600KN, Max Working Length 3100mm, Max Stroke 200mm, Rapid Approach, 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 10,500kg Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Rjdpfx Aey D N R Holmocb

Condition: used, Year of construction: 2021, Bystronic Xact Smart 225/4100 Hydraulic Press Brake. S/No. XACT21278SE (08/2021), Max Press Force 2250KN, Max Working Length 4100mm, Max Stroke 200mm, Rapid Approach 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 15,000kg Rsdpfx Ajy D N Raelmscb Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) Rcodohmmfkepfx Almjb - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders Rodpswva I Hefx Almocb - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm Rcodjdzp Tcspfx Almob weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Year of construction: 1992, Press brake Manufacturer: Beyeler Type: Euro III 60x2050 Year of manufacture: 1992 Bending force: 60 tons Bending width: 2,050 mm Redsyni H Ujpfx Almocb Rated current: 16 A Machine weight: approx. 4,600 kg Equipment Extensive range of tools Various upper and lower tool sets Operational and immediately ready for use Machine is fully functional ä19526

Condition: used, Year of construction: 1991, Press brake Manufacturer: AMADA PROMECAM Type: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Maximum pressing force: 1,250 kg Maximum stroke: 180 mm Sheet thickness: 8 mm Working width/Throat: 3.7 m Rsdpfx Alsx Tzl Iemocb Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 Weight: 9,900 kg ä19526 Availability: immediate

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Press force: 6,300 kN Redpfx Alorivu Semecb Working width: approx. 6,200 mm DSP-Laser-TX Connection power: 400 V / 95 kVA 19526

Year of construction: 2010, condition: used, machine/vehicle number: B0605A0061, Control system: TRUMPF CNC, X-axis: approx. 500 cm, pressing force: 400 t, working length: 5,050 mm, weight: 34,000 kg. Rcsdpfoy T Nytex Almeb

Condition: used, Year of construction: 2008, machine/vehicle number: B0505A0232, operating hours: 22,320 h, (Hydraulic system activated), manufacturing number: F1028-F, pressing force: max. 170 t, stroke: max. 445 mm, operating pressure: max. 300 bar, weight: 12,200 kg, control system: TRUMPF CNC, X-axis: 3,000 mm, angle sensor. Rcjdoy T Nyyopfx Almob

Condition: reconditioned (used), functionality: fully functional, stroke length: 105 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table height: 970 mm, throat depth: 200 mm, total length: 1,420 mm, total width: 1,100 mm, total height: 1,800 mm, overall weight: 2,800 kg, working width: 60 mm, back gauge: 345 mm, control type: manual, actuation type: hydraulic, Press Brake Brand: PROMECAM Model: PPH25.12B Capacity: 1200 x 25T Distance between uprights: 1020 mm Rcjdpoxwukcjfx Almjb Throat depth: 200 mm

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Rsdpfxjwtmi Eo Almocb Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Rcsdpey Rry Dsfx Almjb Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top)

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 27,169 h, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V130 Year: 2000 Technical Data Brand: TRUMPF Model: TrumaBend V130 Year of manufacture: 2000 Operating hours: 27,169 h (read off) Press force: 130 t Bending length: 3050 mm Stroke: 365 mm Operating pressure: 340 bar Dimensions: approx. L 3.80 x W 2.40 x H 2.95 m Weight: approx. 13 t Equipment • Controlled axes: Y1, Y2, X, R • Movable support arms • CNC controlled crowning • Delem 2D graphical control • Hydraulic upper tool clamping • Pneumatic die displacement • Upper tool: straight 28°, R1.0, H 140mm, L = 3,050mm, segmented • Die V12/30°, R1, H 100mm, L = 3,000mm, segmented • Die V30/80°, R5, H 100mm, L = 3,000mm (6x500) • Die V60/80°, R5, H 100mm, L = 3,000mm (6x500) Rcedpfx Asy Ryfuelmsb All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: new, Year of construction: 2025, functionality: fully functional, Press force: 180 t Bending length: 3100 mm Distance between uprights: 3600 mm Control system: Cybelec CybTouch 15 Rodpsy Tn Aaefx Almecb Stroke: 250 mm Installation height: 470 mm Rapid traverse (down): 180 mm/s Bending speed: 0-10 mm/s Rapid traverse (up): 165 mm/s Total power consumption: 15 kW Machine weight (approx.): 12,500 kg Dimensions: 4000 x 2000 x 3030 mm Standard equipment: Basic equipment: • CNC control system Cybelec CybTouch 15 Windows • 4+1 axes: Y1-Y2-X-R-C • Mechanical crowning system: B-CM • Rear gauge system, model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • LED bar system • CE standard - Upper tool clamping system, PROMECAM, mechanical - Lower tool clamping system, PROMECAM, mechanical

Condition: good (used), Year of construction: 2016, functionality: fully functional, Hydraulic Press Brake Make: TRUMPF Model: TruBend 5170 Very good condition, year 2016 The machine is from first ownership and was used only very little in a small operation. The metalworking company is closing due to retirement. Therefore, all tooling (see photos) will also be included in the sale. The machine is located near Stuttgart and is expected to be loaded in week 25/26. Technical Data Manufacturer: TRUMPF Model: TruBend 5170 Year of manufacture: 2016 Working length: 3230 mm Pressing force: 170 t Weight: 12,200 kg Connected load: 28 KVA Clear gap between uprights: 2690 mm Throat depth: 420 mm Table width: 180 mm Installation height: 615 mm Stroke: 445 mm Upper tool height: 110 – 390 mm Ram closing speed: 220 mm/s Dimensions (LxWxH): 5.10 x 1.90 (+ 0.8 m) x 3.05 m Weight: 12.2 t + tooling package Equipment: - Control: TRUMPF TASC 6000, 15" TFT display - Interfaces: parallel, RS 232, USB, Ethernet - 2 adjustable support arms - 1 CNC-controlled bending aid incl. park position right - Electrically closable rear safety guard Rodpfx Ajy Rngmolmjcb - CNC-controlled crowning - Pneumatic die shifting - Hydraulic tool clamping upper and lower incl. front LED lighting - Controlled axes: Y1, Y2, X, X1 R, Z1, Z2 - BendGuard light curtain (for 220 mm/s) - Documentation - Very large tooling package as per photos, incl. adapter for Amada tooling system All information without guarantee. The machine is still in the seller's premises near Stuttgart and can be inspected under power by arrangement. This is a very small business that is now closing due to retirement.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Rsdpfx Aljy Shc Djmecb