Press brake

Trumpf TruBend 5085 . YEAR 2008 TASC 6000. PRICE: 29500,-euro

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, pressing force: 320 t, stroke length: 445 mm, table length: 4,420 mm, throat depth: 420 mm, clearance between the columns: 3,680 mm, total width: 5,300 mm, total height: 3,200 mm, overall weight: 25,000 kg, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump Fpodpfezdc A Iox Ag Iol - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices

Condition: new, Ostas 4-roll round bending machine 4R OHS 2070 x 220 Hydraulic side roller infeed Hydraulic folding bearing Hardened rolls Fpodpotvn D Tsfx Ag Ijl Conical bending device Separate control panel Roller length : 2000 mm Top roller diameter : 220 mm Side roller diameter : 180 mm Total motor power : 4+3 KW Weight : 4900 kg Dimensions (mm) : 4050 x 1550 x 1470 (L x W x H) Performance data bending: 11 mm with smallest inner diameter (5 x top roll) 9 mm with smallest inner diameter (1.5 x top roller) Bending performance data: 9 mm with smallest inside diameter ( 5 x top roller ) 7 mm for the smallest inside diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 structural steel ) Special accessories installed: Infinitely variable rolling speed: NC control:

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards Fjdpsh N Sc Eefx Ag Iopl - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: good (used), Year of construction: 2011, Used Trumpf 5130, 3-meter CNC press brake Fpedozd S Apepfx Ag Iel Type: 5130 Capacity: 3100 x 130 tons Year of manufacture: 2011 Wila hydraulic upper and lower clamping system Bending aid X, R, Z1 and Z2 CNC-controlled back gauge

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength Fodpjymf Rtjfx Ag Iopl • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: ready for operation (used), Year of construction: 2022, operating hours: 731 h, pressing force: 51 t, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, number of axes: 7, This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details. • Drive: Dynamic electromechanical Torque Drive • Capacity and dimensions: • Free upright clearance: 1,305 mm • Usable installation height: 385 mm • Throat depth: 250 mm • Working height: 1,150 mm • Machine frame: Stable welded frame • Axes and backgauge: • CNC axes: 7 (Y, X1, X2, R1, R2, Z1, Z2) • Backgauge: 6-axis independent system (X1/X2/R1/R2/Z1/Z2), both units move independently • Backgauge features: Carbon-fiber fingers, hardened reference surfaces, helical rack Z-drive, flexible positioning • Travels / working range: • Y stroke: 215 mm • X travel: 240 mm (max backgauge range 500 mm) • R travel: 153 mm • Speeds: • Y rapid/return: 220 mm/s • Y working: 25 mm/s • X: 1,500 mm/s • R: 750 mm/s • Z: 2,200 mm/s • Positioning accuracy: • Y: 0.002 mm • X: 0.02 mm • Z: 0.02 mm • Crowning: • CNC-controlled crowning, automatic compensation via drive • Crowning drive integrated in the table • Suited for multi-station bending • Y-axis / press beam: • Inductive Y measuring system • Dynamic spring-back compensation with automatic force-based correction • Hardened adjustable guide strips • Control system: • TRUMPF Touchpoint TruBend, 21.5" TFT Full HD (1920×1080) • Intel Core i5 2.7 GHz dual-core, Windows Embedded Standard 7 • Realistic 3D visualization, TRUMPF technology database • User management with Standard/Expert/Administrator levels • 10 user access cards included • Data interfaces: • USB, RJ45, Ethernet 10/100 Mbit/s • Central Link, OPC UA • Internet teleservice / remote diagnostics • Tool clamping and setup: • Automatic TRUMPF upper and lower tool clamping (self-centering, hardened) Fsdpfx Aezu S Uasg Ijpl • Fast segment change • LED Tool Indicator integrated in upper clamping (shows setup positions/next bend station) • Safety: • Automatic BendGuard (part of Productivity Package Plus) • Optoelectronic safety system with automatic tool-height setting • Allows max permissible Y speed with foot pedal • Automatic adjustment, movable out of working area for side processing • Electronically monitored side safety doors • Electrically operated lift-up rear doors • Emergency stop • Transport securing devices • CE marking • Ergonomic package: • Front support table • Front and rear LED work-area lighting • Support for seated/standing operation • Document shelf • Drawer for measuring instruments Additional equipment • Measuring equipment: • Digital angle gauge • Digital caliper • 90-degree edge square • 1x TecZone Bend license • Wireless 2D code reader with Bluetooth connection Technical Specification Bending Length 1530 mm

Condition: good (used), Year of construction: 2014, pressing force: 100 t, table length: 3,050 mm, clearance between the columns: 2,550 mm, overall weight: 7,700 kg, Press force: 100 t Bending length: 3050 mm Distance between uprights: 2550 mm Total power requirement: 20 kW Machine weight approx.: 7,700 kg Accessories/Equipment: - Light curtain in front of the machine Fpedeztakgopfx Ag Ijl - AMADA tool holder with quick-release mechanism - Tools - 2 stop fingers - DELEM DA 60 touch control system - Foot switch - Side protective doors - Operating hours: 2,948 h - 6 axes, Y1, Y2, X, R, Z1, Z2

Year of construction: 2025, condition: new, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Annealing of metals =ᐳ Marking of many materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width, on request). Simple operation and handling! Our exclusive XL laser marking system stands out due to: • Professional fiber laser source JPT MOPAfix 20 or 30W • 1064nm, 20-400 kHz (for perfect annealing engravings) • Scanner unit "New Generation ECO" • 19" PC control, no external card needed! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "Weightless" lifting door for safe marking. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix with 2 parameters • TCP/IP connectivity for external components • Industry 4.0: The status can be processed at any time via the TCP/IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% through 64-bit architecture • Improved stability through integrated controller card • Optional up to 4 axis controls (integrated) • Optional DEEP engraving with Z-axis • More efficient algorithms for fast hatching. • Completely newly designed galvanometer generation • 2x laser pointer to check the focus position. • LED lighting of the marking area Fpedpfx Aod S H Nyeg Ijl • Connection option for external extraction • Start button and emergency stop on the housing • USB and network connection for data access • Operating manual and operating software in German • Protective enclosure according to laser class 1 • Includes 4 hours of training in our training center (max. 2 people) Do you need something customized? We are happy to help. Choose from our numerous accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in virtually all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for part loading =ᐳ Conveyor belts for infeed and outfeed =ᐳ 3D marking and engraving function. =ᐳ Automatic focus adjustment =ᐳ Rotary unit =ᐳ Motorized slides =ᐳ Interlock system for marking WITHOUT a protective housing, but only with PPE (personal protective equipment) for bulky parts. Our engraving lasers naturally allow for individual customization in design and size! =ᐳ Made in Schweinfurt! Images may include options! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking machine, laser engraving machine, laser marking system, marking laser. Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking machine, laser engraving machine, laser marking system, marking laser, Markierheld

Condition: used, Trolley Beam Punching Machine / Trolley Beam Punch Sandt Type 530 - Used Machine Punching force: 30 tons Fpodpox Sdzpsfx Ag Isl Table size: 1600x500 mm Trolley size: 500x500 mm Used, overhauled machine

Condition: used, Year of construction: 1995, pressure 60T t chamfer lenght 2000 mm distance between columns 1640 mm Fodpoyk Ikdsfx Ag Iepl height of stroke 325 mm work feed 15 mm/s control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t Serial No: 22161