Used Bruderer High Speed Automatic Punch Press for sale (62,555)

Condition: used, Hydraulic punching machine, punching frame for use with JOKA HP-S punching units Hydraulic hole punching machine, hydraulic press for punching tools Year of manufacture approx. 1995 Pressure capacity: 5 tons Stroke: 155 mm Stroke length: approx. 20 mm Punching unit width: max. 54 mm Punching unit height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Mains connection: 230 volts, 50 Hz - for universal use with JOKA SW 20 or SWD 20 punching units - The outreach of the punching units can be larger and can be pushed back - Stroke activation via electric two-hand operation - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/400-1 - mounted on a frame base, mobile Space requirement L x W x H: 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition Podpfsltrmusx Al Njpu

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Ppjdpsi Db Ibofx Al Nou Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Ppsdsvq Rtkspfx Al Neu Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: new, Year of construction: 2026, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. Ppjdotzkmbjpfx Al Nsu approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: used, Year of construction: 1994, Technical details: air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles - foot operation - pneumatic air gun AND - drilling automat for window construction application: - drill automat for door hinge Pedpfx Alsu Icyhe Nopu - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Condition: used, Year of construction: 1974, Technical details: pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm strokes per minute: 20 - 120 stroke: ca./approx. 20 mm mm adjustment of stroke: nein/ no stroke adj. mm dayligth: Arbeitsraum: 220 - 280 mm Table surface area useable: 600 x 600 mm total power requirement: 7,5 kW weight of the machine ca.: 5,0 t dimensions L x W x H: Maschine: 1,8 x 1,2 x 2,7 m Dimensions (LxWxH): Schaltschrank: 0,92 x 0,46 x 1,4 m Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm Ppsdpfx Aeu Icx Rjl Nju *

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press Pedeu Icw Hspfx Al Nopu *

Condition: new, Combined hydraulic shear with two independent pistons, punching station with mechanical back gauge and adjustable piston stroke, notching, shearing of plates, bars, and profiles with adjustable back gauge and automatic cutting control, dual foot pedal, centralized lubrication system, work light. Machine supplied with safety guards according to CE standards, CE declaration of conformity, and operating manual. Applied power: 85 tons. Motor power: 7.5 kW Dimensions: Ppedpsggbt Sofx Al Neu 1,920 x 950 x 2,040 mm (L x W x H). Weight: 2,315 kg PUNCHING: Punching capacity: 33 mm Ø x 20 mm thickness. Indentation depth: 355 mm. Punch stroke: 80 mm. Working height: 1,080 mm. SHEARING: Plates: 380 x 20 mm. 480 x 15 mm. Blade length: 482 mm. Round bars: 50 mm Ø. Square bars: 50 mm. 90° angle profiles: 150 x 150 x 15 mm. 45° angle profiles: 80 x 8 mm. NOTCHING: Maximum thickness: 13 mm. Width: 52 mm. Depth: 100 mm. Working height: 940 mm.

Condition: new, New, available for immediate delivery, subject to prior sale. Combined hydraulic shearing machine with 5 work stations, punching station with mechanical back gauge and adjustable stroke, notching, shearing of plates, bars, and profiles with adjustable back gauge and automatic cutting control, foot pedal, centralized lubrication system, and work light. Machine supplied with safety guards according to CE regulations, CE declaration of conformity, and operating manual. Operating power: 45 tons. Motor power: 4 kW. Dimensions: 1,450 x 900 x 1,450 mm (L x W x H). Weight: 1,215 kg. PUNCHING: Punching capacity: 22 mm Ø x 15 mm thickness. Notch depth: 175 mm. Punch stroke: 50 mm. Working height: 935 mm. SHEARING: Plates: 200 x 15 mm. 300 x 12 mm. Blade length: 316 mm. Round bars: 30 mm Ø. Square bars: 45 mm. 90° angle profiles: 100 x 100 x 10 mm. 45° angle profiles: 70 x 70 x 6 mm. Podogygfvopfx Al Nopu NOTCHING: Maximum thickness: 8 mm. Width: 35 mm. Depth: 75 mm. Working height: 935 mm.

Condition: new, SAHINLER HKM 65 Hydraulic Punching and Shearing Machine Psdpfx Aloggbuho Njpu Applied power: 65 tons. Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x 20 mm thickness. Punching depth: 305 mm. Punch stroke: 55 mm. Working height: 1,030 mm. SHEARING: Plates: 300 x 20 mm. 375 x 15 mm. Blade length: 380 mm. Round bars: Ø 45 mm. Square bars: 45 mm. 90° angle profiles: 120 x 120 x 12 mm. 45° angle profiles: 70 x 70 x 10 mm NOTCHING: Maximum thickness: 10 mm. Width: 45 mm. Depth: 90 mm. Working height: 900 mm.

Condition: excellent (used), Year of construction: 2015, Control system 840 D SL, twin spindle HSK 40, 2 x 16 tool positions, 18,000 rpm, direct path measuring systems, internal coolant system 30 bar, Knoll coolant system, workpiece changer, laser control, measuring probe, central lubrication system, automatic loading doors. Ppsdpfx Aljzcapvs Nou

Condition: used, Year of construction: 1994, punching pressure:20 t total power requirement:4 kW Pjdpfx Ash Ra Rnsl Nspu weight of the machine ca.:2,8 t dimensions of the machine ca.:3,2 x 1,4 x 1,45 m punch diameter:max. 105 mm sheet thickness - max.:6 mm stroke length max.:25 mm voltage:380 V frequency:50 Hz connected load:4 kVA punch diameter:105 max. mm input unit:0,01 mm

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Ppsdpfsv If T Tex Al Nou Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Psdpfx Aey Ttrtel Nopu Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: used, throat 750 mm punch diameter max. 75 mm Ppsdpfetqqp Sex Al Nou max. sheet metal thickness 4 mm weight of the machine ca. 250 kg dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm

Condition: used, Year of construction: 1984, Punch power 400 kN table surface area ca. 1250 x 700 mm throat 500 mm hole punching press: capacity (dia. x thick.) 100 x 3 mm hole punching press: capacity (dia. x thick.) 75 x 4 mm hole punching press: capacity (dia. x thick.) 30 x 10 mm x-travel 700 mm y-travel 470 mm Podpfovb I Imex Al Njpu total power requirement 4 kVA weight of the machine ca. 2 t dimensions of machine L x W x H 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Min./max. drilling radius: 305/1305 mm Ppodpfjy I Ua Iox Al Nou Spindle taper: SK 40 Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel (321) Capacity: 400 litre (product Dependent) Mixing Chamber: 1,300mm long x 800mm Diameter Psdpeymazgefx Al Nepu Type Of Blades: T-Arm Blades Motor: 5.5kW Motor and Gearbox Also Includes: External Mild Steel Jacket Provision for One Chopper but None Currently Fitted. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Motor Power: 5.5 hp Material Of Construction: Stainless Steel (321) Choppers (Y/N): No Jacket (Y/N): Yes Dimensions: 1300mm long x 800mm Diameter

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Ppsdpfx Aeymayiel Nsu Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 Podeyylqbepfx Al Nspu LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: excellent (used), Year of construction: 2007, Amada EM2510NT electric punch, 45 Station Turret with 4 Auto indexing units 2008 Year of manufacture Country of Manufacture: Japan Bridge Type 20 tonnes (196kN) High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm 3.2mm mild steel 150Kg max sheet weight mm 45 Stations Turret Turret Stations: 24 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) Auto Indexing Stations Ppjdjyylm Nepfx Al Nju 2 x B (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm) 128 m/min

Condition: like new (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Ppodpfx Aeyw Rzael Nju Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Podezb D Rnopfx Al Nopu

Condition: used, Model: Balestrini 1+1 dual-spindle turret press, patterning machine, 2500mm worktable size, used, tested. Pedozfi Sdspfx Al Nspu

Year of construction: 2000, condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible. Ppjdpfx Alezadmgo Nsu