Punching press

Sahinler HKM 85

Condition: new, cutting pressure: 85throat depth: 355stroke: 80length of knive: 482motor: 7,5heigth: 2040weight approx.: 2315 Gbjdpoh Hrx Eefx Ag Rog

Condition: new, prebending: 13,0sheet length: 3100sheet thickness: 16,0total power requirements: 17,5weight approx.: 11,6messurements (LxWxH): 5,31x1,66x1,59 Gsdpsd Auacjfx Ag Robg

Year of construction: 1999, condition: good (used), Nail lenght range - 50 - 90mm Speed - 100 nails/sec. ( frequency regulator ) Management - PLC Simens S5 Godpfx Agjdmbp Uj Robg

Condition: ready for operation (used), Sertom brand calender, hydraulic, length 25000 mm with invitation, 2 lower rollers 300 mm, upper roller 318 mm, thickness 14 mm. 22 Kw rotation, 5.5 kw movements, 2.5 kw bunk. Overall dimensions: 600x190x210(h)cm Weight: 15,500 kg Gbjdpfxsnr Npye Ag Rjg

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Gjdpfslff H Eex Ag Rebg Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit Gbjdpfx Agor D N Eqo Reg working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. Gbsdpfxehzbips Ag Rsg - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, functionality: fully functional, Year of construction: 1989, roller (top) diameter: 200 mm, side roll diameter: 150 mm, sheet thickness (max.): 6 mm, working length: 3,000 mm, Working length 3000 mm Bending capacity 6 mm Bending capacity 4 mm Top roller diameter 200 mm Diameter of side rollers 150 mm Gbedpfjuzm Aysx Ag Rjg Hydr. folding bearing

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: welded steel construction 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Optional equipment: Technical data: Gsdpor Ddursfx Ag Robg shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Godpfx Askvnumog Robg Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!