Used Wagner D1500-15Iv-100 for sale (22,857)

Condition: used, Tank capacity (litres) 100 Motorized pumps Up to 2 external each tank Ppodpfjvpfhyjx Ahlet Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: ready for operation (used), 100,000 liter stainless steel tank, insulated It has a heating coil running along the entire height of the tank Ppjdsn E N N Eopfx Ahlst Wed. 3.15m Height 16.50m

Condition: ready for operation (used), Wagner paint unit Paint and lacquer pump MODEL T.371 Ppjdpfxsyaqpbs Ahlet

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro. Pedped Nnb Refx Ahlspt

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: Ppjdpfsww Adtjx Ahlet • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. Ppodpfx Ahswk Dwnolet The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Technical characteristics: *HYDRAULIC AUTOFEED *DISC DIAMETER 500 mms Pedpfx As Dv Rcjhljpt Comments: *MADE IN GERMANY

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1616, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 450 m/min, spindle speed (max.): 2,500 rpm, No reserve price - guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the scheduled period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Spindle speed range: 40 to 2,500 rpm Table dimensions: 600 x 210 mm Number of feeds: 16 Feed rates: 28 to 450 mm/min Number of slots: 4 Tool holder: SK 40 MACHINE DETAILS Podoy D Shnepfx Ahlept Dimensions & weight Dimensions (L x W x H): 2,000 x 1,200 x 1,700 mm Machine weight: 1,000 kg EQUIPMENT Mounted vice (jaw width: 110 mm) Set of tool holders Milling cutters Collets Three-axis digital readout (manufacturer: FAGOR) External reference: 10

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 178979, turning length: 309 mm, turning diameter: 280 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, controller model: Mazatrol 640T Nexus, No reserve price – guaranteed sale to the highest bidder! The technical data is sourced from the manufacturer's information. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Max. turning diameter: 280 mm Max. machining length: 309 mm Swing diameter: 550 mm X-axis travel: 190 mm Z-axis travel: 330 mm Spindle bore: 61 mm Rapid traverses X/Z: 30/33 m/min Pedpfx Aey Sln Rehlspt MACHINE DETAILS Control: Mazatrol 640T Nexus Main power circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current: 31 A Main motor voltage: 400 V Rated power: 24 kVA Weight: 3,500 kg Note: The bar feeder is not included in the offer.

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Ppedpfjy Ur Hljx Ahljt Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements Ppsdpfsy Rn A Iox Ahlot The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle. The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information. TECHNICAL DETAILS Lifting height: 19,065 mm Overall height: 10,490–19,710 mm Side shift: ±600 mm Tilt compensation: ±6° Mechanical height compensation: 200 mm Load center: 1,220 mm Turning radius: 6,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Drive system Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW Torque: 1,175 Nm Engine speed: 1,600 rpm Displacement: 7.7 l Cylinders: 6 Emission standard: EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 Track width: 4,600 mm Hydraulic system Filtration: 10 µm Accumulator pressure: 60 bar Accumulator volume: 2 l Electrical system System voltage: 24 V Cabin Cabin length: 1,605 mm Cabin width: 1,480 mm Cabin height: 1,620 mm Connection: 24 V / 10 A Tyres Tyre type: 14.00 x 24" PR: 24 EQUIPMENT Box-frame chassis Bolted tanks Mudguards Podpfoy T Ed Isx Ahlspt Crane lifting eyes Turbo-II air filter Wheel nut protection HLL filter Oil tank preheating LED lighting Reversing alarm Beacon light MD4 touch display Drive login system Cab ventilation Interior rearview mirror Clothes hook Side mirrors Air horn USB port Central lubrication system Reversing camera Fire extinguisher Anti-slip strips Cabin protection frame

Condition: used, Can Fastening and Embossing Machine With associated controls and conveyor Please note the items in this lot 30466-426 are simultaneously offered in the combination lot 30466-425 as a complete line. Ppjdpjy Ux H Esfx Ahlot The separte parts of the complete line 30466-425 are offered as individual lots 30466-426 to 30466-433 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Year of construction: 2003, condition: used, 2003 NeuAr Z-NC 100 Electronic Discharge Machine Work Tank Dimension 1,400 x 900 x 600mm. Table Dimension 1,000 x 500mm. Maximum Table Load 2,000kg. Axis Travel 'X'=600mm, 'Y'=500mm, 'Z'=250mm. Distance From Head To Table 780mm. Maximum Electrode Weight 250kg. S/No. HU100203 (2003). Pjdpfxoy U Ndhj Ahlspt Description With Dielectric Tank (900L) & Spinflo Oil Cooler. Overall Dimensions W3,500 x D2,300 x H2,500kg. Machine Weight 3,500kg.

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Ppsdpfsxwk E Asx Ahlot Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: good (used), Matrices, 100 mm x 2 Offset punches x 2 Ppedpfxozaitro Ahljt In good condition

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 Psdpfx Ahey Ur A Tslopt turning to the left

Condition: refurbished (used), “SGM DIS 100” for Sale Manufacturer: SGM Magnetics Ppodpfx Ajy U N Exohlet Type: DIS 100 Belt widthness: 1.000 mm (New belt) Included: – New Control-unit Eddy Current Separator is overhauled, sandblasted and painted.

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012); Pedpfx Ajy Ey E Rohljpt

Condition: excellent (used), Year of construction: 2021, total length: 1,200 mm, total width: 800 mm, total height: 250 mm, SCHUNK - KONTEC KSG 100 MACH-ID 9632 Make: SCHUNK Podoy Uvk Iepfx Ahlopt Type: KONTEC KSG 100 Year: 2021 Clamping force 4 - 30 kN Weight 19.5 Kg Single stroke vice Clamp width: 100mm Max. opening: 100mm Manuel or hydraulic: Manuel Number of matching vices:4 Length: 1200mm Width: 800mm Height: 250mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: Yale, hydraulic cylinder with spring return, single-acting, 100 mm stroke -Type designation: YS-23/100 -Piston rod: Ø 42 mm -Lifting capacity: 23 t -Operating pressure: max. 700 bar -Number: 3 cylinders available Price: per piece -Dimensions: 150/85/H195 mm Ppsdpfewtmznex Ahlot -Weight: 7 kg/pc.

Condition: good (used), puncher 100 t square edge steel 50 x 50 mm round bar steel 50.0 mm Pedpfjy Uy Spsx Ahlspt L-beam 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.) Ø 30.0 x 26 mm shear: flat material 600 x 15 mm throat 300 mm work stroke 80.0 mm work height max. 1165 / 960 mm total power requirement 9.0 kW weight 2250 kg range L-W-H 2050 x 1200 x 2050 mm well-maintained condition (!!) current new price approx. 30.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations * Flat steel shears * Profile steel shears * Hole punch * notching station - driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at hole punching station - Material scraper - Lateral storage options - 2x freely movable foot switches - Many accessories included in the scope of delivery * swiveling machine lamp * Various punch dies * Spare blades for the flat steel station ... etc. - Operating instructions (PDF)

Condition: ready for operation (used), Spako vessel with electric elements Elements under bottom skin With scrape mix action, top driven Tap emptying Capacity 100 litres Ppsdpfxjy N Suls Ahlet With process control

Condition: excellent (used), Hydraulic cylinder, support cylinder -Piston diameter: approx. 130 mm -Piston rod: 100 mm -Stroke: approx. 700 mm -with support rollers -each cylinder with hand pump -Number: 3 cylinders available Ppodpfjb A Hvlox Ahljt -Price: per piece

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint Ppsdpfx Ahjyzfu Ajljt -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm -Wave: 16 teeth -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg