Used Svetruck 1875-33 for sale (3,957)

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22 Hodpox A Thkofx Aicofk

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Hedpfx Aijt Hw D Rjcjfk Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, machine/vehicle number: 9003, Spiralbindemaschine - Spiral binding machine FOELL 33 Hfjdsrgb Aqepfx Aicsk Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1963, machine/vehicle number: 418, 1-Zangen Klebebinder - 1-Clamp Perfect Binder W. Gantenbein BAFC 33Year 1963 - Serial-No. 0418 1 Clamp hotmelt binder Block back roughing with suction Online-Video-Inspection by Skype-Video Hfjdeh Aw T Aopfx Aicsk We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Hjdpfx Aiok Aa Itjcsfk Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2025, machine/vehicle number: 2440236, fuel type: diesel, motor manufacturer: Deutz TD2.2L3-SV, General information Field of application: Construction Weights Empty weight: 1.500 kg Hsdpfszaig Sex Aicefk Functional Generator capacity: 33 kVA Dimensions of cargo space: 254 x 114 x 165 cm CE mark: yes Other information Fuel consumption: 6 Liter per hour at 75% Load Generator: LEROY-SOMER TAL042-C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 851 kg Functional Generator capacity: 33 kVA Dimensions of cargo space: 196 x 90 x 134 cm Hfsdjy R I Evspfx Aicjk CE mark: yes Other information Fuel consumption: 5.8 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 50 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment For sale, a professional set in excellent condition, ready for immediate use. The set includes: MFT 30/300S Big Bag Hfsdpfjzncrpsx Aicek FAS 300 with mobile suction unit This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Optional: Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred.

Condition: used, Dimensions Fork length: 2250 mm Fork width: 300 mm Hfedpfxoyzagao Aicek Load capacity: 19 t

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 305 h, load capacity: 200 kg, empty load weight: 3,673 kg, construction height: 1,980 mm, fuel type: electric, total length: 4,170 mm, drive type: Elektro, arm reach: 5,570 mm, construction width: 1,500 mm, working height: 12,000 mm, Articulated telescopic platform Condition: Like new Technical condition: very good Front tire type: Pneumatic Rear tire type: Pneumatic Hfjdpfxozrcble Aicek Drive/Power: 48V (8 x 6V 315-Ah batteries)

Condition: used, mileage: 100,000 km, power: 103 kW (140.04 HP), first registration: 01/2020, fuel type: diesel, empty load weight: 2,138 kg, maximum load weight: 1,162 kg, overall weight: 3,300 kg, wheelbase: 3,450 mm, next inspection (TÜV): 03/2026, color: white, emission class: euro6, number of seats: 3, loading space volume: 10.3 m³, loading space length: 3,000 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, construction height: 2,522 mm, working width: 2,050 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, sliding door, soot filter, traction control, trailer coupling, Air conditioning, trailer hitch, advanced central locking with remote control, exterior mirror, electrically adjustable - right, exterior mirror, electrically adjustable and heated, electric windows in the front, lane keeping assist, emergency braking assist, cruise control, parking assist in the rear, cargo area partition, spare wheel with road tires, 4 new all-weather tires fitted, digital audio system (DAB), radio/navigation with Bluetooth hands-free system, CD player with MP3 capability and touchscreen, USB interface, heat-reflecting glazing, tachometer, driver airbag, driver and passenger airbags, anti-lock braking system (ABS), traction control system (ASR), comfort seats, center armrest, driver comfort seat - height-adjustable with armrest and lumbar support, shift paddles on the steering wheel, start/stop system, diesel particulate filter, sliding door cargo/passenger compartment right, immobilizer with transponder, outside temperature indicator, power steering, wooden cargo floor with interior lining, lashing rails, rear door (opening angle 270 degrees), Citroen Connect / SOS button (emergency call for vehicle localization), short digital roof antenna, lane assist (AFIL), reinforced rear suspension, permissible total weight 3.30 t, indicator lights integrated in exterior mirror - colored, double passenger seat, artificial leather upholstery, padded headrests, brake assist, steering column (steering wheel) height-adjustable, electronic stability program (ESP), SCR system (AdBlue technology), body/superstructure: high-roof box van, wheelbase 3450 mm, drive type: front-wheel drive, 6-speed transmission Financing example * Cash price: 19,933.00 Euro * Down payment: 3,987.00 Euro * Term: 60 months * Net loan amount: 15,946.00 Euro * Effective annual interest rate: 6.49 % * Nominal interest rate (fixed) p.a.: 6.30 % * Gross loan amount: 18,633.00 Euro * Monthly rate: 311.00 Euro Hfjdovx T Elopfx Aicok *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for whom the car dealership acts as a loan intermediary in an advisory capacity. Creditworthiness required. The information also corresponds to the 2/3 example according to § 6a para. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - trailer hitches, also up to 3500 kg possible - auxiliary heaters - screen for reversing camera and/or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - retrofitting of a tailgate lift (tail lift) and other individual solutions for your business needs possible for an extra charge.

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Output capacity PE: approx. 400 - 450 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Hsdpfxeifgwls Aicsfk Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Machine length: approx. 9 m Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Foil feeder: 1 unit Hfsdpfsyw Nxkjx Aicsk Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Condition: used, mileage: 292,810 km, power: 96 kW (130.52 HP), first registration: 06/2018, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, Total permissible weight: 3300kg Hfjdpfxozrp Npo Aicek

Condition: ready for operation (used), Heidenhain RON 255 - 18000 N4 . 288 400 33 SN: 4528064D, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Hfsdpfx Asx Dwxveicsk

Condition: new, Bauer & Böcker cable routing magnet, 22mm, flat gripper with neodymium magnet in rubber, for cable mounting with a reusable cable tie, unused, 100% functional, scope of delivery as shown in the photos. Hfsdokk A Unepfx Aicek

Condition: ready for operation (used), Heidenhain LS 106C Linear Scale ML 2640 mm Id. 295 712-33 SN:7486068C + AE LS 106 C Reader Head Id. 294 742 02 A, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Hfjdpfx Aijx Er Dfscjk

Condition: new, Heidenhain LS 487 320 5.0 ML/2.. B 10A 4ZS14 ~1Vpp 2F 01.. linear encoder ID: 33934091G, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hfjdpfx Aijx Er Evjcjk

Condition: new, Heidenhain LS 487 320 5.0 ML/2.. B 10A 4ZS14 ~1Vss 2F 01.. linear measuring device ID: 572251-33, unused in opened original packaging, 100% functional, scope of delivery as per photos Hjdpfxex Er E Ae Aicsfk

Condition: ready for operation (used), Siemens SMP Centronics G34901-C1032/33, E Status see photo, used, good condition, 100% functional Hfjdpfxsxahvdo Aicjk

Condition: used, Year of construction: 1994, CNC bending press Hfodpjyvfklefx Aicek Manufacturer: Blemas Type: 100-33 Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Press force: 100 tons Working width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 22726

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Hjdpeya Dagefx Aicefk Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, mileage: 55,947 km, power: 103 kW (140.04 HP), first registration: 07/2023, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, Gross permissible weight: 3,300 kg. The vehicle is available at our facility in Pradamano (UD). For information and photos, please contact: Giulio Desenibus, Phone – 0432.409212, Mobile/WhatsApp – 366.6069108; Davide Tonino, Phone – 0432.409209, Mobile/WhatsApp – 338.6218473. Hfsdpfxey Riwms Aicsk

Condition: like new (used), Morgana Autocreaser 33 automatic creaser The device is in very good condition. A modern device that allows you to create a crease (groove), thanks to which we can bend paper or other materials more easily. Sheet size 330x900mm Hsdszph Nvspfx Aicsfk Weight: 400gsm programmer Weight: 150kg Manufacturer: Morgana, UK Image Creasing: Yes Creased materials: paper, cardboard, cardboard

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Hodpfx Aisn Tprnocefk Application: suitable for laid gratings for mesh size approx. 33 x 33 mm Included in delivery: 01x clamp fastening, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 100 x 32 x 15 mm (LxHxW) 01x bracket, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 50 x 25 mm 01x threaded rod M8, II. choice (virgin material) total length: approx. 100 mm 01x square nut M8, II. choice (new goods) Material color: hot-dip galvanized Total weight: 0,120 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.