Used Parker Tube Press Crimping Machine for sale (68,375)

Condition: used, functionality: fully functional, machine/vehicle number: D40L/8219, Offer Number: D40L/8219 Machinetype: crimping machine Fgjdpewi Thaofx Afkoc Make: WAFIOS Type: K70S Constr. year: wire diameter: 1- 5 mm speed - meter/min: ca. 15 Location: In our warehouse

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: Fgjdpfx Afjy Rumyjkoc - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Fgodpfx Aoy Rummofkjc Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Fgsdpfx Afoy Rumaekjc Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards Fjdpfey Rulvsx Afkegc – operation tools – hardened pressure plate

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, Refurbished Pullmax Kumla F13C edge rolling machine in excellent condition for sale. Can edge roll steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick! Fsdjy Tni Tjpfx Afkegc

Condition: used, Year of construction: 1992, Manufacturer : Norden Model : Nordenmatic 700 Year : 1992 Type: Automatic tube filling and sealing machine Capacity: 70 tubes max Filling volume: 1 - 300 ml Dosing accuracy: +/- 0.1-0.5% Tube size range: Length: 50-250 mm / Diameter: Ø 10-50 mm Empty tube feeding : automatic Cleaning + Tube orientation device with a stepper motor Sealing Module: HA - Hot Air Number of buckets: 22 units Product feed hopper + dosing pump Vulcanic Vulcatherm cooling unit (year: 2004) - 3.5 kW (10°C - 35°C) / Outlet temperature: 25°C max - min 3°C Laminar flow Fgedpfxsx R D Exe Afkec Machine dimensions: 135 x 190 x 210 cm Weight : 2 400 kg Spare parts sold with the machine. Choose from two formats among many available formats (additional formats can be added as an option). Full documentation available Video in operation available

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Fodpfxjx R Arke Afkogc Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 8698, overall weight: 380 kg, Powerful corner crimping machine for processing aluminium profiles with groove sizes from 25–60 mm and profile chamber offset up to 40 mm. The adjustable punching units and infinitely height-adjustable sensors, knives, and stop inserts allow for precise adaptation to a wide range of profile contours. Fgjdpfx Ajy Sptkjfkjc

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, input voltage: 380 V, Tube forming machine Brand: BLM Fodsx Tt H Rspfx Afksgc Model: TUBE-FORM Year: 2007 Serial number: 415050200004 Weight: 2700kg Power: 12KVA Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Clamping force: 5t Max. working stroke: 130mm

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Fgodpfx Aed E A I Ijfkjc Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system Fedpfxogd D U Eo Afksgc From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm Fgjdedzqltepfx Afksc - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush Fjdpfopu R Ngjx Afkjgc - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar Fjdpfxjh U Dtus Afkegc 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm Fodpfedzqaaox Afkjgc upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm smallest bending radius: 32 mm Fgodpfxjykl Rzs Afkec motor: 30 kW

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Fodpoyvqc Ujfx Afkegc

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Further items in other sizes - new and used - can be found in our store! Fgedpfx Afeuzhmtekec International shipping costs on request!

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Type: 2H B Without tools Fgodpfsx Ivpwjx Afksc

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 350 mm, roller diameter: 90 mm, Key advantages: clinching technology without rivets – no additional fasteners required, low operating costs, fast and repeatable joining process, intuitive HMI touch screen, compact and robust design, power supply 230 V / 50 Hz, Fgsdpfxjy Rrcrs Afkjc operating pressure 6 bar, easy to use and maintain, perfect for serial and workshop production. Application: ventilation and HVAC, metal enclosures, home appliances, automotive, control cabinets, sheet metal components manufacturing. Shaft diameter: 90mm, Throat depth: 350mm, Sheet thickness range (mild steel): 2x 0.5-1.2mm, Press force: 76KN, Power supply: 230V Air pressure: 6 BAR Weight: 500kg

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Fgsdpfxskdnv Ts Afkec Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: good (used), Year of construction: 1980, weight of the machine ca. 160 kg No accessories Fgjdexy S Hyspfx Afkec For rolling beads

Condition: new, Year of construction: 2024, Corner Crimping Machine - Pertici HP 601, year 2024 - BRAND NEW Hydraulic corner crimping machine designed for the processing of aluminium profiles: Its cast iron and steel construction makes it robust and reliable, ensuring consistent crimping quality over time. The crimping heads are controlled by a single mechanical command, guaranteeing perfect synchronization of movements. The machine is equipped with a hydraulic clamping wedge that ensures maximum profile holding during the crimping operation. The easy adjustment of the knife blocks allows quick and efficient profile changeovers. Technical specifications: Maximum crimping force: 3500 Kgp Maximum punching height: 120 mm Nominal pressure: 7 bar Dimensions (L x H x D): 850 x 1250 x 800 mm Fjdpfx Ajy R S Uuofkegc Weight: 300 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Machine data Length:4000 mm Fsdpfor H Havjx Afkogc Width:2600 mm Height:1400 mm Weight:9000 kg