Used Mobile Presses for sale (18,095)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-wire, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Bedpjzh Iigjfx Aqtjwp Materials: Paper, cardboard, film Note: The press is in good condition. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, sale is subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Year of construction: 2023, condition: new, NATUS (Micromed) BrainQuick Mobile Video EEG System – SD PLUS Research Amplifier (48 channels) This high-performance 48-channel EEG system combines flexibility, signal quality, and ease of use in a compact, mobile solution. (Price is per unit) Key Features: SD PLUS™ Research Amplifier (48 channels) – Supports up to 40 common reference channels with multiple auxiliary inputs Exceptional Signal Integrity – High-resolution acquisition with a sampling rate of up to 16 kHz Optimized for Demanding Environments – technical evaluation, signal analysis development, training environments, spare parts recovery, and other non-clinical applications. Intuitive Interface – User-friendly layout with customizable toolbars for live and review modes Flexible Layout Options – Switch between study type and workflow stage, or use centric views Integrated Data Management Quick Editing Tools – Make fast adjustments without leaving the current screen Included & Additional Details: Condition: SEALED Warranty: 3 months (in accordance with our General Terms and Conditions of Labconsort) On-site inspection in Belgium available Bwedpfxszh Rhxe Aqtop The buyer is solely responsible for determining legal permissibility, regulatory status, technical suitability, installation requirements, maintenance requirements, user training requirements, and lawful intended use in the destination jurisdiction prior to purchase and prior to any use. The seller makes no representation that this equipment complies with Regulation (EU) 2017/745, is suitable for use in a clinical setting, or is lawful for clinical deployment in any specific country.

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, Bodpfx Aou R Sxxoqtowp frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: new, new all stainless steel discharging height ± 1.770 – 2.250 mm chain break system 400V – 50 Hz Motor 1.1 kw mobile Bjdpfx Aozdn Uhjqtswp

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Bjdpfxjzgfv Uo Aqtswp Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Dimensions (LxBxH): 510 x 10 x 290 cm Capacity: 175 metric tons x 3,700 mm Rear stop: CNC - 1,000 mm Control system: DA-66T Clearance between columns: 3,100 mm Max travel: 265 mm Maximum clearance between table and ram: 530 mm Stroke: 410 mm Table width: 104 mm Drop speed: 140 mm/sec Working speed: 10 mm/sec Retraction speed: 100 mm/sec Motor power: 18.5 kW Length: 5100 mm Width: 2360 mm Height: 2900 mm Bsdpfxjzhiwrj Aqtjwp Weight: 11.5 metric tons Capacity: 175 metric tons Bending length: 3,700 mm Machine in excellent condition Control system: DA-66-Touch 9 axes: Y1 / Y2 / X1 / X2 / Z1 / Z2 / R1 / R2 / V With laser safety system Original price: 114,000 Online auction of machinery and equipment from a steel fabrication company due to relocation, including a VOORTMAN CNC flat and angle steel processing line, MICROSTEP plasma cutting machines, a GEMA powder coating machine with drying oven and exhaust system, WHEELABRATOR blasting machine, MEUSER & CO radial drilling machine, DURMA CNC hydraulic guillotine shear and press brake, LVD press brake, HACO guillotine shear, BEHRINGER semi-automatic miter band saw, PEDDINGHAUS punching and universal punching-shearing machines, RÖSLER shot blasting machine, various DEMAG overhead cranes, VERNET DIJON forging hammer, AMADA CNC punching and nibbling machines, METORA band saw with roller conveyor, etc. The online auction opens Thursday 25 June and closes Tuesday 7 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 17 July Pickup day is on: - Thursday 9 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Bedpfxey S Rqws Aqtswp Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame Bedpfxsy R Nnfo Aqtewp • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 2,537 h, lifting height: 43,150 mm, lifting power: 272 kg/m, empty load weight: 20,262 kg, fuel type: diesel, ID111313 MACHINE: Articulated boom lift Bsdezhm S Tepfx Aqtjwp BRAND: Genie MODEL: Z-135 YEAR OF MANUFACTURE: 2011 ENGINE: Diesel HOURS: 2537 CONDITION: Good PLATFORM HEIGHT (MAX): 41.15 m WORKING HEIGHT (MAX): 43.15 m HORIZONTAL REACH (MAX): 21.26 m

Year of construction: 1995, operating hours: 1,765 h, condition: used, Screen design: 2-deck screen box Bwodpfozh Hcrex Aqtsp Screening system type: 2-deck classifying screen Active grate spacing: feed area approx. 4000 x 2500 mm Feed height: approx. 3500 mm

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning Bwodpfxevuuh Tj Aqtsp stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Bwedpfsvuuhgsx Aqtsp Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: ready for operation (used), Year of construction: 1969, Spindle bore diameter: 80 mm Bore: 15 mm Bsdpfx Aezh Ibpoqtswp Stroke: approx. 550 mm Overhang: 250 mm Table size: 300 x 370 mm Table cut-out: 85 mm Space requirement: 1000 x 800 x 2000 mm

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Bedpfxszb Eg Re Aqtjwp Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, These stacking racks can be used as mobile warehouse racks. Available in various versions, but above all, flexible in height. The loading platform is designed for all standard pallet sizes, bulky or difficult-to-palletize goods. You can determine the height of the stacking racks yourself by choosing from the stanchion Bwodpjx Ahu Sefx Aqtep

Condition: used, These stacking racks can be used as mobile warehouse racks. Available in various versions, but above all flexible in height. Bwjdpfox Ahurox Aqtep The loading platform is designed for all standard pallet sizes, bulky or difficult-to-palletize goods. You can determine the height of the stacking racks yourself by choosing from the pillar

Condition: good (used), Year of construction: 2010, Used Trumpf PB 30160 CNC press brake Type: PB 30160 Bwedpfezfpkyex Aqtep Capacity: 3200 x 160 tons Delem DA56 CNC control Y1, Y2, X, and R axes CNC controlled CNC hydraulic crowning Upper beam servo hydraulics Panasonic servo motors on the rear stroke 1 set of tools included

Condition: excellent (used), Year of construction: 2017, Very well-maintained E Brake from SafanDarley. Bwsdpjzfphlofx Aqtop Type: E Brake B 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, X1, R, Z1, and Z2 CNC Hydraulic Wila NS top clamp Includes a set of tools.

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t Bwedpfx Aqeyx Inastjp blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t Bedpfx Aqsyx Impotewp speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: used, Used steel stacking rack 1550x1200x300 mm, suitable for stanchions 60. Bsdoy Hpzqopfx Aqtewp 3 mm. A steel stacking rack is the solution for those seeking maximum flexibility and efficiency in warehouse storage. Designed for efficient and safe storage of one europallet. The robust construction of hot-dip galvanized steel makes the rack

Condition: used, This hot-dip galvanized stacking rack is a durable and flexible solution for the efficient storage and stacking of goods on block pallets. Thanks to the robust steel construction and corrosion-resistant finish, this stacking rack is ideally suited for intensive use in warehouses, logistics environments, and outdoor Bwjdpfxoy Hpvhs Aqtjp

Condition: used, Batch offer consisting of 16 used and robust stacking racks. A flexible and space-saving solution for storing pallets and goods in warehouses and distribution centers. With its generous dimensions of 2150 x 1100 x 310 mm (L x W x H), the rack is suitable for storing up to two Euro pallets side by side. Bwedpjy Hpttofx Aqtsp The construction is made of

Condition: used, These used stacking racks can be used as mobile storage racks. Available in various versions, but above all flexible in height. The loading floor is designed for all standard pallet sizes, voluminous or goods that are difficult to palletise. You can determine the height of the stacking racks yourself by making a Bedpsx Ahu Ejfx Aqtjwp

Condition: used, These stacking racks can be used as mobile storage racks. Bwedpfxsx Ahulo Aqtsp Available in various versions, but above all flexible in height. The loading floor is designed for all standard pallet sizes, voluminous or goods that are difficult to palletise. You can determine the height of the stacking racks yourself by making a choice