Used Ima+Bargstedt+Sag Double Sided Squaring/Edgebanding Machines for sale (84,936)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine, few operating hours. 3.7 kW motor for high material removal rate, robust design, suitable for continuous commercial use. Steel drums with hard rubber coating for perfectly flat, smooth surfaces. Independently adjustable rear drum for controlled material removal. Two-stage feed gearbox for adaptation to different types of wood. Heavy-duty feed table made of gray cast iron, precisely guided by four spindles. Drum hood with double dust extraction connection and guide plates for efficient dust removal. Digital height indicator for quick and safe adjustment to the desired dimension. Abrasive belts with 75 mm and 100 mm width can be used. Technical data Feed motor: 0.18 kW Scope of delivery 80 grit abrasive belt mounted on the drum 100 grit abrasive belt mounted on the drum Height crank, operating manual and spare parts list. Credpfsziw Afex Aptsf

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Crsdjzina Iopfx Aptof Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Crjdpfx Ajwhzh Eoptof

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Year of manufacture: 1983 Serial number: 35805 Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: Cedpfx Aeziwnnoptjrf eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: used, Year of construction: 2001, Professional 4-side sanding machine OMEF model LEVIG (year 2001). This high-performance machine is equipped with an extensive configuration of sanding aggregates, ensuring precise and efficient processing of wooden components from all four sides simultaneously. Perfect for advanced woodworking and manufacturing shops. Aggregate Configuration: 1. Bottom 2. Top 3. Transverse top 4. Transverse bottom 5. Right vertical 6. Right horizontal 7. Left vertical 8. Left horizontal Technical Specifications: • Manufacturer: OMEF • Model: LEVIG. 1NT-1NLLsx + 1NT-1NLLdx Cedpfxozmgbxe Aptsrf • Year of manufacture: 2001 • Total power: 16.74 kW • Working pressure: 5 - 6 bar • Weight: approx. 2000 kg Workpiece dimensions (min. / max.): • Thickness: 10 / 70 mm • Width: 20 / 90 mm • Length: 400 / 2900 mm Machine dimensions: • Length: approx. 7.0 - 8.0 m • Width: 2.2 m • Height: 2.0 m

Condition: used, Year of construction: 1985, Working width: 180 mm Working height: 120 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power, bottom spindle: 3.7 kW Motor power, right spindle: 3.7 kW Motor power, left spindle: 3.7 kW Motor power, top spindle: 5.5 kW Adjustment, bottom spindle: - Crodpfjzdzbnjx Aptef Adjustment, right spindle: - Adjustment, left spindle: handwheel Adjustment, top spindle: electric Planer heads: reversible knives Feed rate: 2 Feed roller pressure: spring-loaded Power consumption: 38 A Motor brake: automatic Dust extraction connection: Machine length: Machine width: Weight:

Condition: good (used), Year of construction: 2002, functionality: fully functional, Profile machining center, portal milling machine Type: MBZ 72/80-3 Year of manufacture: 2002 Condition: used Technical data: x-axis: 7000mm y-axis: 1000mm z-axis: 370mm Spindle drive: 6.8KW Spindle speed: 20,000 RPM Tool holder: SK30 Pull stud: DIN 69872 Tool changer: 12 Special equipment/accessories: – Vögele central lubrication system – Niels minimum quantity lubrication system – Vacuum system with 8 clamping modules – 8 tool holders incl. tools – Workpiece probe incl. tool holder – Documentation Crodpfxoy S Hazo Aptsf

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8/2017, working width: 180 mm, total height: 1,300 mm, overall weight: 800 kg, saw blade diameter: 200 mm, spindle diameter: 40 mm, input voltage: 380 V, type of input current: DC, Used Goma machine for manufacturing French herringbone flooring. An excellent tool for producing high-quality wooden flooring. It allows for the quick and precise production of flooring elements – herringbone patterns – with a choice of 3 angle types (45 degrees, 60 degrees, 90 degrees). The machine is in good working order and comes complete with 2 sets of saw blades and diamond cutters, as well as 3 types of tables with different angle settings. Year of manufacture: 2017. After installation, the machine is ready for operation. Crsdpfx Apoza U H Djtef

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Cjdpfezlgb Aex Apterf Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.875,- (net)! Price for transport within Germany (excluding islands): € 550,- (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Crodeddmq Topfx Aptsf 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/80 each with 2x3 adjustable. Arms 1.20 m, 500 kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3.5m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands 2,899.- € (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Frame: IPE 160 Shelf uprights on one side approx. 3500 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2250 kg per stand with 4 stands per arm level 4 x 500 kg = 2000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Csdoddmtcspfx Aptjrf Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2017, condition: new, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW - : Price ex-works including loading! 1 racking unit with 4 uprights: €3,210.00 (net)! Transport within Germany (excluding islands): €550.00 (net) A cantilever racking system, hot-dip galvanized, consisting of: Codpfsddmtqjx Aptjrf 4 racking uprights, double-sided, approximately 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 adjustable arms, 1.20 m, 750kg load capacity per arm with cross braces approximately 1.30 m Racking uprights, double-sided, approximately 3500mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Load capacity with load center at 600 mm: 750 kg per arm / 2250kg per upright with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available in stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will apply to the stated price for lengths from 1.50m! Custom dimensions (different center distances) are also available on request, but will incur a surcharge and have a longer delivery time as they need to be manufactured specifically. If you do not specify any different center distance, we will supply the racking with a center distance of 1.30m. In this case, the length of a racking row with 4 uprights (3 bays) is approximately 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) are selectable! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 4.185 (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/100 each with 2 x 3 adjustable Arms 1.20 m, 860kg load capacity per arm Csdpoddmqyjfx Aptorf with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 860 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, The prices mentioned in this advertisement are valid as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of steel as a raw material is limited and currently unpredictable. Therefore, we kindly ask you to inquire about the current prices and availability! Codpfjddmr Njx Aptsrf We will be happy to provide you with an up-to-date offer! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW -: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Price for transport within Germany (excluding islands): €425 (net)! Of course, you can also create longer or shorter rack units by omitting or adding more frames (or by using different bay widths); this example with 4 frames is just the most common rack solution! A cantilever rack system, hot-dip galvanized, consisting of: 4 rack uprights, double-sided, approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable arms of 1.20 m, 500kg load capacity per arm with cross braces approx. 1.30 m Rack uprights, double-sided, approx. 4160mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable rack arms each Load capacity with load center at 600 mm 500 kg per arm / 2250kg per upright side with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will be added to the stated price for lengths from 1.50m! Special sizes (different bay widths) are also available upon request, but they will also incur an additional cost and have a longer delivery time as they need to be manufactured separately! If you do not specify any deviating bay widths, we will deliver the rack with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors.

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Cedpfx Asxn Rz Eepterf Technical specification ⚙️ ✅ Model - ED 120. ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Cjdjdfx Hcepfx Aptjrf Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Cjdpfx Apjyqxxrstsrf Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 39 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 006017, Position 1: Vertical Storage Systems IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 2: Angular Beam Panel Saws IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 3: Panel Feeding and Loading IMA-COMBIMA SYSTEMS/N/I/R75/1110 Cjdpfx Ajwukzhspterf Position 4: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 5: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 6: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 7: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 8: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 9: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 10: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 11: edge bander batch 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Position 12: Roller Conveyors IMA-COMBIMA SYSTEMS/N/I/R75/1110

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Crsdst H Twyepfx Aptsf

Condition: used, machine/vehicle number: 007811, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Csdpfx Apev Dyxcetjrf Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 5: Panel Turning Device BIESSE - RBO-STREAM SB Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Credpfx Aowuciweptof Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: used, machine/vehicle number: 005608, Position 1: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE Position 2: Single Edgebanders STEFANI + MAHROS-EVOLUTION SB ONE Position 3: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE Credpjiii Izsfx Aptof Position 4: Single Edgebanders STEFANI + MAHROS-EVOLUTION SB ONE Position 5: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Crsdpsd Akygofx Aptsf Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: used, Year of construction: 1962, x-travel 6300 mm y-travel 2200 mm workpiece height 1835 mm Table area 6000x1835 mm Rest 2 Side head 2 Crjdjyqud Dspfx Aptsf number of T-slots 7 T-slot - distance 240 mm T-slot - width 28 mm bed length 14650 mm column daylight 2075 mm feed 5-60 m/min workpiece weight 15000 kg weight of the machine ca. 55 t dimensions of the machine ca. 14,65x4,37x4,05 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, TECHNICAL DETAILS - Disc : 2x - Connection : 50 Hz 3x400 V - Machine weight : 3200 [kg] - Number of hours under power : 94 787 [h] - Wheel diameter : 700 [mm] - Wheel height : 200 [mm] - Max. height of the workpiece : 100 [mm] Cjdpfxow Ulnho Aptorf