Used Genlab Minis/30 Laboratory Incubator for sale (27,125)

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC workpiece weight 4500 kg table surface area 4730 x 1465 mm Pedpjxb Eg Nofx Anzjpw tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Pedpfx Aoy Urtfonzopw Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2027, total width: 880 mm, total length: 690 mm, input frequency: 50 Hz, electrical fuse: 16 A, Dough kneader Kemper F 30 SL Dough kneader – dough mixing machine Kemper, model: F 30 SL with stainless steel bowl and kneading arm Ppedpjy Nv A Tofx Anzow very robust technology! Flour dust cover 2 speeds with timer Machine is mobile only available from us, DGUV V3 certified Connection: 400V, 16A CEE plug Dimensions: 880 x 690 x 1135/1480 mm, W x D x H Used machine Visit our large exhibition of bakery machines!

Condition: used, SMA Sunny Tripower STP 25000TL-30 Solar Inverter, 25 kW Podpfjzn Aytex Anzopw Available quantity: 11 units Manufacturer: SMA Solar Technology AG Model: Sunny Tripower STP 25000TL-30 Device type: Solar inverter Condition: used Year of manufacture: 2016 Rated AC power: 25,000 W Apparent power: 25,000 VA DC maximum voltage: 1,000 V MPPT voltage range: 390–800 V Max. DC input current: 33 A / 33 A Max. PV short-circuit current: 43 A / 43 A AC rated voltage: 380 / 400 / 415 V (3~) Grid frequency: 50 / 60 Hz Max. AC output current: 36.2 A Degree of protection: IP65 Protection class: I Surge voltage category: III Weight: max. 61 kg

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,640 h, Year of manufacture: 2019 Field of application: Construction Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks Psdpexqfb Ejfx Anzopw

Condition: good (used), power: 14 kW (19.03 HP), fuel type: diesel, color: yellow, first registration: 03/2006, Year of construction: 2006, operating hours: 5,484 h, Model year: 2006 Drive: Track Number of cylinders: 3 Empty weight: 1.720 kg Technical condition: good Visual appearance: good Price: On request Ppsdpfjw Hpqrox Anzow Serial number: JBB00645 Please contact Ernst van Hek for more information

Condition: new, maximum load weight: 37,619 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,240 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t Ramps | Top Specification Location: Germany Condition: New / Unused Availability: Immediately --- Description For sale is a brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low-loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps — ready for immediate use. Psdpsx Efzusfx Anzjpw --- Technical Data Dimensions: - Overall length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (+600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights: - Permissible gross weight at 80 km/h: 48,000 kg - Permissible gross weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - Kingpin load: up to 18,000 kg --- Chassis & Axles: - 3 BPW axles, air suspension, drum brakes - 1 trailing axle at rear - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tyre pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area: - Foldable 40t access ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + chequer plate over wheel arches --- Load Securing: - Multiple 8,000 daN and 13,400 daN lashing points - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - 450 mm front wall, side and rear walls made of aluminium --- Body & Chassis: - High-strength S700 MC steel - Partially metallised (Zn/Al 85/15) — strong corrosion protection - Rear angle: 10°, 500 mm - 2" kingpin - Mechanical landing legs at front - 45t supports at rear --- Equipment: - 2× toolboxes - All-round warning beacon - LED lighting - Rear work lights - Wheel chocks - 9×2 extensions (up to +300 mm) - Stake box - Reflective strips on sides & rear --- Colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Condition: used, Year of construction: 2018, 1 Kubota KX042-4 mini excavator 1 quick-change bucket QC03HP, width 132 cm, 3 digging buckets 36, 23, 75 All technical data for the auction item can be found under "Documents" as a downloadable PDF! Color: as shown in the pictures Year of manufacture: 2018 Machine number: 30275 Podpfxszqaz Hs Anzspw Vehicle ID: JKUK0424T01H50275 Weight in kg approx.: 4200 Condition: used

Condition: used, Year of construction: 2020, 1 hydraulic excavator / mini excavator HITACHI ZAXIS ZX65USB-6 CLR with digging bucket 3 digging buckets 60, 40, 80, 135cm, with 1 spare chain Ppedpfxozqay Ns Anzsw All technical data for the auction item can be found under "Documents" as a PDF download! Color: as shown in the pictures Year of manufacture: 2020 Vehicle ID HCMAFF5ZH00030335 Weight in kg approx.: 6160 Condition: used

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Ppodpfszpgrijx Anzew

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 9 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 130 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: New Front tire type: Superelastic Front tire size: 28X9-15 Rear tire type: Superelastic Pedpfxevla S Se Anzepw Rear tire size: 6.50-10 Fork positioner, 3rd valve, 4th valve, front work light, roof protection, soot filter, full cabin, CE certificate, safety light. Image serves as a symbolic representation.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 475 h, load capacity: 336 kg, lifting height: 3,000 mm, fuel type: electric, drive type: Elektro, High-lift order picker Mast type: None Technical condition: good Battery condition: 80 - 100% Ppedpfx Asvg Tlbonzew CE Certificate,

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Coupling: torsionally flexible shaft coupling for splined shaft -Shaft: Ø 28 mm -Toothed shaft: Ø 30/27 mm, dimensions see photos -Number: 2x couplings available -Price: per piece -Dimensions: Ø 115 x 150 mm Ppjdpfx Anozld Nkszjw -Weight: 4.4 kg/piece

Condition: used, Max. sheet thickness: 4 mm steel, 3 mm stainless steel Adjustable angle: 30° - 120° Pneumatic angle adjustment Pjdpfx Anozl Du Hjzepw Stroke activation via foot switch Single stroke or double stroke adjustable via selector switch Weight: approx. 1000 kg

Condition: used, lifting height: 4,090 mm, Year of construction: 2017, operating hours: 5,530 h, Field of application: Construction Empty weight: 5.000 kg Dimensions (LxBxH): 551 x 184 x 252 cm Track width: 40 cm Digging depth: 3.625 m Unloading height: 4 m Pedpfx Anjyzcd Iezopw = Additional options and accessories = - Rubber tracks

Condition: excellent (used), lifting height: 16,400 mm, Year of construction: 2021, operating hours: 796 h, Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg Dimensions of cargo space: 315 x 75 x 195 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2026-01-15 Production country: NL Pjdpfozi Azmsx Anzjpw Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6 * 2021 * 796 operating hours * Diesel (Yanmar) and 230 Volt drive * Equipped with all options * 16.4 meter working height * 14.4 meter horizontal reach * 3150 kg lifting capacity * 2800 kg own weight * Remote Control * Articulated outriggers * Including documents

Condition: used, lifting height: 5,020 mm, Year of construction: 2019, operating hours: 8,470 h, Year of manufacture: 2019 Empty weight: 8.300 kg Podpfx Aoxg I Rbonzspw Dimensions (LxBxH): 583 x 230 x 271 cm

Condition: used, Year of construction: 2000, operating hours: 4,513 h, lifting height: 3,700 mm, fuel type: diesel, mast type: duplex, fork length: 1,090 mm, fork width: 1,050 mm, total height: 2,390 mm, total length: 2,650 mm, total width: 1,240 mm, color: orange, Empty weight: 4.440 kg Psdpfx Ajziybwonzepw Lifting capacity: 3.000 kg - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 10479 - Operating hours: 4513 - Lifting capacity: 3000kg - Lifting height: 3700mm - Overhead clearance: 2390mm - Fork length: 1090mm - Maximum fork width: 1050mm - Minimum fork width: 250mm - Number of wheels: 6 Wheels - Attachment: Side-shift - Options: Work lights, Air tires, Joystick, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Toyota 2Z - Transport dimensions: 2650mm x 1240mm x 2390mm (l x w x h) - Transport weight [kg]: 4440kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2012, operating hours: 2,448 h, 2012 | Wacker Neuson 803RD | Used Mini Excavator < 7t | 2448 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 10300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 53 inspection points 51 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. The battery was out of order and the alternator needed to be checked – this was observed during the inspection. However, the seller has replaced both the battery and the alternator, and now everything is working properly. Variable track, 2 buckets. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39891 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Ppsdszlc Hzspfx Anzew

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Ppjdozn Hx Tepfx Anzew

Condition: as good as new (ex-display), 7 pieces of guides suitable for the gang saw ESTERER HD 30 or EHD 30, absolutely as good as new because unused, 5 of the 7 guides are hollow body guides for cooling water flow Pjdpfx Ajigqqhsnzspw

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine HURCO BMC 30 M, year of manufacture 1997 Control system: ULTIMAX 3 dialog Travel distances: X 762 mm, Y 458 mm, Z 610 mm Table: 500 x 1000 mm Spindle speed: up to 8000 rpm Spindle mounting: SK40 Magazine capacity: 24 positions with 24 tool holders Coolant system included. Ppodozlbytjpfx Anzsw The machine was used for milling plastics. Machine is ready for operation. Machine documentation is available.

Condition: new, Drive: Track Manufacturer: Kubota AS Pedpfx Anszlq Duozspw

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure Ppjdpfxodx R Tfe Anzew - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Ppedpfevlz Arsx Anzjw Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -