Used Gasparini Slitting Line for sale (10,631)

Condition: like new (used), functionality: fully functional, Log sorting line with 4 pockets, 2 on each side. Material diameters 100–500 mm, lengths 3–5 m. Log deck 12 m: new Step feeder: new Receiving conveyor, 10 m: refurbished Nwedpoz Dtchsfx Akion Pockets, 13 m: partly new Electronics: new Hydraulic system: new

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. Nedpo Af I Hdefx Akijwn 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: used, machine/vehicle number: 007901, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 3: Batch 1 edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Nwsdpfx Akszwmbajisn Position 5: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 6: Single Edgebanders FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 7: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE

Condition: used, machine/vehicle number: 005449, Position 1: Panel Tipper MORBIDELLI-FLEXA 912+FLEXA 902 Position 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902 Nodpfxjwucl Ej Akijwn

Condition: used, machine/vehicle number: 007966, Position 1: Panel Feeding and Loading SCM-EVOLUTION C Nsdpfxewu Agps Akijwn undefinedPosition 3: Panel Stacking and Offloading SCM-EVOLUTION C

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3 Nwsdpfx Aewu Ackokien

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Nwjdjwuciwepfx Akien Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: used, machine/vehicle number: 008762, Position 1: Roller Conveyors LCR-FLEXPACK Nwsdpfez Eqd Ejx Akien Position 2: Roller Conveyors LCR-FLEXPACK Position 3: Cardboard Closing Stations LCR-FLEXPACK Position 4: Roller Conveyors LCR-FLEXPACK

Condition: used, Year of construction: 2009, A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible. Nodpfx Asz S Ivyekijwn

Year of construction: 1995, condition: used, A decoiling, straightening and stamping line with roller feed, straightening machine, decoiler and hydraulic press is available, 1) Roller feed WV-U-80/DSM 300 P-N, working direction: left to right, max. strip width: 300mm, strip thickness: 0.1-5mm, max. strip cross-section: 1,000mm², roller diameter: 80mm, max. feed speed: 120m/min, max. roller contact force: 4.5kN, feed accuracy: ±0.05mm, adjustable pneumatic pressure: approx. 5bar, 2) Straightening machine RSTC W60/7/300, working direction: left to right, passage width: 320mm, max. strip width: 300mm, strip thickness: 0.4-5mm, max. strip cross-section: 1,050mm², straightening and correction roller diameter: 60mm, feed roller diameter: 80mm, strip speed: 0-30m/min, feed rollers: 4, straightening rollers: 7, correction roller: 1, drive power: 3kW, 3) Decoiler E 3000/300 OMB, working direction: left to right, max. load capacity: 30kN, expansion range: 470-520mm, max. coil outer diameter: 1,500mm, strip width: 300mm, main shaft height above floor: 1,000mm, weight: 1.2t, 4) Hydraulic Single-Column Press Dunkes, pressing force: 125t, including documentation. On-site inspection is possible. Njdoz R A Rpopfx Akiewn

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Technical specifications: Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Nwsdjxhgl Tepfx Akion Motor power: 15 kW Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2016, Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment. Nwedjz I Dc Hspfx Akien

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22 Nwedpjy Hcd Sofx Akijn

Condition: refurbished (used), RISCO + TOWNSEND ID.NO. 0941 Risco line with Townsend RT 74 Sausage line with very high capacity. Nwodef T R Dzjpfx Akijn In good condition taken directly from production.

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables Nwedpjgvu Aljfx Akijn - Sorting criteria according to agreement

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h Nwjdpfxsn Utt He Akisn * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Nwsdpfxoiyytqs Akion Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!!

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Nwsdpfx Asig T Amskion Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Year of construction: 2004, condition: used, High-performance band resaw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Nsdsdfcryspfx Akiewn Roll diameter 1250mm Roll width 150mm Saw blade speed: 28-50 m/s Connected power: approx. 45kW Feed rollers 2x4 Roller height 200mm Cutting height up to the lower edge of the pressure guide: 400mm and higher Cutting width 250mm to the left of the saw blade and 250mm to the right of the saw blade with center cutting device complete technical documentation Original photos will follow.

Year of construction: 2004, condition: used, High-performance band saw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roller diameter 1250 mm Roller width 150 mm Saw blade speed: 28-50 m/s Nsdpsdfcv Iofx Akiown Connected power: approx. 45 kW Feed rollers 2 x 4 Roller height 200 mm Cutting height up to the lower edge of the pressure guide: 400 mm and higher Cutting width 250 mm to the left of the saw blade and 250 mm to the right of the saw blade with center cutting device complete technical documentation Original photos will follow

Condition: excellent (used), This line was bought to produce protein bars for a sports nutrition business (under 900 hours). The machinery is in immaculate condition having only been used occasionally for their own production. PLEASE NOTE THAT THE VEMAG HP25E HAS BEEN REPLACED BY A NEWER HP20E FROM A DIFFERENT FACTORY. Nwsdpfx Akounm S Hsijn

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t Nwedpfsupxd Dsx Akisn

Condition: like new (used), Year of construction: 2020, FOR GERMAN MARKET ONLY. NOT FOR SALE OUTSIDE GERMAN SPEAKING TERRITORY DUE TO SALES AREA PROTECTION. Nwodpfxjffdgpe Akien

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Nwjdpsxwxghjfx Akion Other - Webasto Other - Air conditioning = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, total length: 1,250 mm, total width: 780 mm, total height: 1,350 mm, input frequency: 50 Hz, overall weight: 580 kg, power: 8 kW (10.88 HP), - Year of manufacture 2013 or 2015, in well-kept condition, from a small craft bakery, see also photos, technically and optically very good, checked and cleaned, new design with powerful 4 / 8 kW motor. - for up to 120 kg dough or approx. 75 kg flour - with 2 digital Diosna timer and 2 speeds - powerful 4 and 8 kW motor of the latest design - incl. protective cover (also available without intervention), bowl and kneading spiral in stainless steel - technically and optically in very good condition Dimensions: approx. width 78 cm, depth 125 cm, height 135 cm, weight approx. 580 kg Price: Njdpfx Aowh Scgokiown BJ 2013: 8.450,- EUR netto ex warehouse Bergkamen BJ 2015: 8.950,- EUR netto ex warehouse Bergkamen Currently also refurbished and repainted or as SP 80 (new version) or 160 D in stock. Please enquire if you are interested.